# changelog

author: Alasdair Kergon <agk@redhat.com> - 2.02.01-1.0
changelog:
  - Fix lvdisplay command line for snapshots; fix open file promotion
    to read/write; fix an lvcreate error path.
  - Update package dependencies.


author: Alasdair Kergon <agk@redhat.com> - 2.01.08-1.0
changelog:
  - Improve detection of external changes affecting internal cache.
  - Add clustered VG attribute.
  - Suppress rmdir opendir error message.


author: Alasdair Kergon <agk@redhat.com> - 2.00.24-1
changelog:
  - More upstream fixes.  (Always check WHATS_NEW file for details.)
  - Add requested BuildRequires. [bz 124916, 132408]


author: Jeremy Katz <katzj@redhat.com> - 2.00.20-2
changelog:
  - add patch for iSeries viodasd support
  - add patch to check file type using stat(2) if d_type == DT_UNKNOWN (#129674)


author: Alasdair Kergon <agk@redhat.com> 2.00.12-1
changelog:
  - Install default /etc/lvm/lvm.conf.
  - Move non-static binaries to /usr/sbin.
  - Add temporary links in /sbin to lvm.static until rc.sysinit gets updated.


author: Alasdair Kergon <agk@redhat.com> 2.00.10-1
changelog:
  - Update to version 2.00.10, which incorporates the RH-specific patches
    and includes various fixes and enhancements detailed in WHATS_NEW.


author: Jeremy Katz <katzj@redhat.com> 2.00.08-5
changelog:
  - Fix sysfs patch to find sysfs
  - Take patch from dwalsh and tweak a little for setting SELinux contexts on
    device node creation and also do it on the symlink creation.  
    Part of this should probably be pushed down to device-mapper instead


author: Jarod Wilson <jarod@redhat.com> 1.2.1-9
changelog:
  - Start cpuspeed after syslog on boot so its messages are logged (#516244)
  - Don't load acpi-cpufreq by default on Intel 7100 series processors,
    due to a hardware bug that can lead to a lockup (#449004)
  - Minor initscript exit status fixups (#495049)


author: Jarod Wilson <jarod@redhat.com> 1.2.1-8
changelog:
  - Revert fixes for #488924, they unfortunately lead to cpuspeed
    never starting on boot on xen kernels, since cpuspeed starts
    before xend (#498406)


author: Jarod Wilson <jarod@redhat.com> 1.2.1-7
changelog:
  - Handle case under kernel-xen where xm is unavailable and/or
    we can't communicate with xend (additional fix for #488924)


author: Jarod Wilson <jarod@redhat.com> 1.2.1-6
changelog:
  - Don't try loading speedstep-centrino if acpi-cpufreq already
    successfully loaded, it causes p-state issues (#485480)
  - If we're running on a Xen kernel and the number of virtual cpus
    doesn't match the number of physical cpus, we could end up
    scaling the wrong physical cpu due to migration, so in the
    vcpus != pcpus case, don't do freq scaling (#488924)


author: Jarod Wilson <jarod@redhat.com> 1.2.1-5
changelog:
  - Support for speedstep-centrino module fallback if
    new-and-improved acpi-cpufreq doesn't work (#463488)


author: Jarod Wilson <jwilson@redhat.com> 1.2.1-3
changelog:
  - Disable freq scaling by default on AMD rev F and earlier
    cpus when running xen, due to clock instability (#435321)


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Fix up exit codes for LSB compliance (#237940)
  - Try loading acpi-cpufreq even on systems that don't
    report enhanced speedstep support (#216702)
  - Indentation and variable usage cleanup


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Fix error-suppression for systems that report support
    for est, but have it disabled in the bios (#220200)


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Fix up documentation in config file (#219926)
  - Fall back cleanly to userspace governor on
    non-centrino/powernow-k8/p4-clockmod systems
  - Update description to reflect support for
    kernel-space freq scaling


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Turn on ia64 builds (#216702)
  - Fix status on xen kernels
  - Move config file to /etc/sysconfig/cpuspeed, more
    appropriate for initscript configs (#152305)
  - Manify 'cpuspeed --help' along with other details (#172655)
  - Tweak cpuspeed default thresholds (#147565)
  - Let non-centrino/powernow-k8 systems also use other
    validated governors (#219926)
  - Fix cpuspeed daemon options settings (#221829)
  - Fix status and condrestart for centrino/powernow-k8 (#219926)
  - Give feedback when loading/unloading a cpufreq governor
  - Rework config file and initscript to make it much easier
    for end-users to adjust frequency scaling setup (#151761)
  - Log start/stop events with useful info
  - Don't start on xen kernels (freq scaling not supported)
  - Set lock file for centrino/powernow-k8 so status 
    indicates we do have scaling working 
  - Fix up centrino/powernow-k8 stop function (#213999)


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Spec tweaks to bring in line with Fedora packaging guidelines
  - Add docs to package
  - Mark config file as noreplace
  - Be sure to stop service before uninstall


author: Dave Jones <davej@redhat.com>
changelog:
  - Merge patch from Michal Jaegermann <michal@harddata.com>
    that solves the acpi-cpufreq problem in an improved
    way and fixes several other nits.


author: Dave Jones <davej@redhat.com>
changelog:
  - Only load acpi-cpufreq on speedstep capable machines.
  - Unload acpi-cpufreq if BIOS tables didn't exist or
    other acpi-cpufreq failures occured.


author: Dave Jones <davej@redhat.com>
changelog:
  - Remove a bunch of no-longer needed gunk from the initscript.
  - Use on-demand governor on centrino/core based systems for now,
    as it seems to have a better effect.


author: Jesse Keating <jkeating@redhat.com> - 0:0.0.8-8
changelog:
  - rebuild
  - Add patch to not include linux/compiler.h
  - Remove br on glibc-kernheaders, part of the build-env.


author: Jay Fenlason <fenlason@redhat.com> 0.0.8-5
changelog:
  - add -man patch to correct the names of the default tables.
    bz#123089 aptables man pages is not correct: built in chain name are wrong.


author: Jay Fenlason <fenlason@redhat.com> 0.0.8-2
changelog:
  - backport latest version from 3E branch.
  - Add 2.6-kernel patch, since glibc_kernheaders has incorrect
    arptables headers for the 2.6 kernel.


author: Akira TAGOH <tagoh@redhat.com> - 0.20050222-8
changelog:
  - rely on PATH to find mkfontdir instead of /usr/X11R6/bin hardcoded.
  - replace Requires: mkfontdir instead of /usr/X11R6/bin/mkfontdir.


author: Akira TAGOH <tagoh@redhat.com> - 0.20050210-1
changelog:
  - Initial release.
  - integrated the below packages:
    - ttfonts-ja
    - jisksp14
    - jisksp16-1990
    - kappa20
    - knm_new
    - fonts-ja
  - Update shinonome font to 0.9.11.
  - Use Sazanami fonts instead of Kochi fonts.


author: Ondrej Vasik <ovasik@redhat.com> - 2.4.0-3
changelog:
  - added /usr/src/debug, /usr/src/kernels (#487568)
  - added several /usr/share/locale dirs (#487568)
  - added /usr/share/man{0,1,3]p to owned files (#487568)
  - added ownership for /usr/share/man/<locale>/man<xy> (#487568)
  - added URL, project on fedorahosted


author: Phil Knirsch <pknirsch@redhat.com> - 2.3.7-2
changelog:
  - Fixed games location according to FHS 2.1 (#165425)
  - Added {_libdir}/sse2 to owned files (#192853)
  - Added /dev to owned files (#192860)
  - Added {_datadir}/icons to owned files (#195911)
  - Dropped obsolete /etc/X11/starthere (#191163)


author: Bill Nottingham <notting@redhat.com> 2.2.3-1
changelog:
  - move /usr/dict to /usr/share/dict (#113645)
  - add /usr/lib/locale, /var/empty (#108686,#113036)
  - add */%{_lib}/tls (#113050)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - /etc/opt, /usr/share/{info,man/man*,misc,doc} (FHS 2.1)
  - added /var/games.  Data should move from /var/lib/games to there (FHS 2.1)
  - bump version up to 2.0 already!


author: Erik Troan <ewt@redhat.com>
changelog:
  - added /var/db
  - set attributes in the spec file; don't depend on the ones in the cpio
    archive
  - use a tarball instead of a cpioball


author: Roman Rakus <rrakus@redhat.com> - 1.4.3-13
changelog:
  - There are some nonsense warnings and errors while using usermod,
    so ignore them.
    Resolves: #458144


author: Roman Rakus <rrakus@redhat.com> - 1.4.3-10
changelog:
  - Set home dir for user ident to /
    Resolves: #458144
  - Identify right error in get_tok_uint and similar functions
    Resolves: #438787
  - Work rigth with valist when logging is on.
    Resolves: #446844


author: Adrian Havill <havill@redhat.com> - 1.4.2-8
changelog:
  - tweak setting of uid/gid for key file so systems with no prior
    ident user/group don't generate a warning (#135837)


author: Adrian Havill <havill@redhat.com> - 1.4.2-4
changelog:
  - slightly better error checking for insane cases
  - tweak of the openssl requires dependency loop (#131291)
  - as ident.key is created in %post, tweak so verify passes (#131530)
  - make the uid/gid for ident conform to the past (#135752)


author: Adrian Havill <havill@redhat.com> - 1.4.0-1
changelog:
  - revise makefile; don't over-optimize as gcc can produce bad code
  - ptr cleanup when multiquery and missing /proc/net/tcp*
  - improve create_opt (error handling, debugging, identifiers)
  - add --prefix option for matching IPv4 to IPv6


author: Adrian Havill <havill@redhat.com> - 1.3.4-1
changelog:
  - retry reading proc with pauses to reduce false negatives
  - match IPv4 addresses against IPv6 compatibility addresses


author: Adrian Havill <havill@redhat.com> - 1.3.1-1
changelog:
  - increase default connections-per-sec/max-instances for HP
  - more doc cleanup
  - remove unnecessary rootdir check for -N/--ident


author: Adrian Havill <havill@redhat.com> - 1.3.0-1
changelog:
  - add unknown-error only -e option
  - edit readme, add rfc to docdir
  - code cleanup; remove static buffers, orthagonalize id names
  - ipv6 hybrid addr zero run correction
  - extra eight bits added to random key


author: Adrian Havill <havill@redhat.com> - 1.2.7-1
changelog:
  - added Provides to satisfy HP pkg rpm dep (#121447, #111640)
  - more code cleanup; minimize --resolve dns lookups


author: Adrian Havill <havill@redhat.com> - 1.2.4-1
changelog:
  - code vet and minor changes re alan@'s comments
  - default operating mode to alias all usernames as 'nobody'
    to prevent noobies from getting their mail addr harvested
  - clean up README documentation


author: Adrian Havill <havill@redhat.com> - 1.2.3-1
changelog:
  - mark xinetd conf file as a noreplace config file
  - more robust error checking for proper rfc1413 tokens


author: Adrian Havill <havill@redhat.com> - 1.2.0-1
changelog:
  - A few tweaks in the cmdline options for orthagonality
  - minor bug fix regarding reading from stdin in some multiquery cmdline cases
  - add --resolve


author: Adrian Havill <havill@redhat.com> - 1.0.0-2
changelog:
  - Obsolete pidentd -- authd and pidentd can't/shouldn't coexist on FC/RHEL
  - license tweak to allow openssl under any condition
  - no spec url needed; package is not worthy enough.


author: Petr Machata <pmachata@redhat.com> - 0.5-13.45svn
changelog:
  - fix tracing of fork of 64-bit binaries with 64-bit ltrace on ppc
  - improve earlychild patch
  - Resolves: #265941


author: Petr Machata <pmachata@redhat.com> - 0.5-12.45svn
changelog:
  - support tracing of 31-bit binaries with 64-bit ltrace on s390
  - remove bogus "wrong pid" message from earlychild patch
  - Resolves: #265941


author: Petr Machata <pmachata@redhat.com> - 0.5-11.45svn
changelog:
  - patch from Supriya Kannery implements fetching 5th and further
    function arguments on s390
  - fix testsuite for interaction of -c and -o
  - added fork/exec patches, mostly IBM's work
  - added trace-exec tests into suite
  - fix handling of the case where forked child is reported before
    parent's fork event
  - Resolves: #265941
  - Resolves: #426352
  - Resolves: #485779


author: Petr Machata <pmachata@redhat.com> - 0.5-5.45svn
changelog:
  - fix plt handling on ppc32 (symval patch)
  - fix attaching to process (attach patch)
  - add fork & exec patches from IBM
  - adjust weak symbol handling (ppc32fc5 patch)


author: Petr Machata <pmachata@redhat.com> - 0.5-1.0.45svn.5
changelog:
  - adding .gnu.hash patch to support new ELF hash table section
  - adding testsuite patch to silent some bogus failures


author: Petr Machata <pmachata@redhat.com> - 0.5-1.0.45svn
changelog:
  - adding upstream (svn) version.  It contains most of patches that we
    already use, and has support for secure PLTs.


author: Petr Machata <pmachata@redhat.com> - 0.4-1.6
changelog:
  - e_entry patch: use elf's e_entry field instead of looking up _start
    symbol, which failed on stripped binaries.


author: Petr Machata <pmachata@redhat.com> - 0.4-1.4
changelog:
  - turn off opd translation on ia64, GElf already gives us function
    address.
  - turn on main-internal test, it should pass now.


author: Petr Machata <pmachata@redhat.com> - 0.4-1.2
changelog:
  - svn fix for opt_x patch
  - patches for testsuite for s390{,x}
  - turning off main-internal test. Fails on ia64, needs investigation.


author: Petr Machata <pmachata@redhat.com> - 0.4-1
changelog:
  - Upstream 0.4
  - opt_x patch: New structure for opt_x list elements, now with
    'found'.  Using it in options.c, elf.c.
  - testsuite patch: Automated testsuite for ltrace.


author: Jakub Jelinek <jakub@redhat.com> 0.3.36-2
changelog:
  - make x86_64 ltrace trace both 32-bit and 64-bit binaries (#141955,
    IT#55600)
  - fix tracing across execve
  - fix printf-style format handling on 64-bit arches


author: Jakub Jelinek <jakub@redhat.com> 0.3.32-1
changelog:
  - update to 0.3.32
    - fix dict.c assertion (#114359)
    - x86_64 support
  - rewrite elf.[ch] using libelf
  - don't rely on st_value of SHN_UNDEF symbols in binaries,
    instead walk .rel{,a}.plt and compute the addresses (#115299)
  - fix x86-64 support
  - some ltrace.conf additions
  - some format string printing fixes


author: Matt Wilson <msw@redhat.com>
changelog:
  - rebuilt for next release
  - patched Makefile.in to take a hint on mandir (patch2)
  - use %{_mandir} and %makeinstall


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-aiptek to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for aiptek input driver generated automatically
    by my xorg-driverspecgen script.


author: Mike A. Harris <mharris@redhat.com> 1.1.1.2-1
changelog:
  - Updated xorg-x11-drv-tdfx to version 1.1.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for tdfx video driver generated automatically
    by my xorg-driverspecgen script.


author: Jason Vas Dias <jvdias@redhat.com> 1.0-0.9.pre5
changelog:
  - Allow build to succeed with new gcc / glibc-kernheaders
    (compile failed on __u64 redefinition on x86_64).
  - Add a static /usr/lib/libnl.a library to libnl-devel for
    programs that might need to do a static link to libnl.
    Added after consultation with Christopher Aillon.


author: Tim Powers <timp@redhat.com> 1:1.4.2-7
changelog:
  - include dejagnu.h
  - move %{_libexecdir}/config.guess into %{_datadir}/dejagnu 
  - include overview docs (bug #59095)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - add alpha expect patch (#989)
  - use 
    CFLAGS="${CFLAGS:--O2}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu \
  	--target=noarch-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib64 \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info


author: Mike A. Harris <mharris@redhat.com> 1:7.1-1
changelog:
  - Update to font-util-1.0.1 from X11R7.1
  - Set package version to X11 release the tarballs are based from.


author: Mike A. Harris <mharris@redhat.com> 1:1.0.1-3
changelog:
  - Remove "Obsoletes: xorg-x11-font-utils" as the package should not obsolete
    itself.  Leftover from the original package template it seems.  (#182439)


author: Mike A. Harris <mharris@redhat.com> 1:1.0.1-2
changelog:
  - Added with_X11R6_compat macro to conditionalize inclusion of mkfontdir and
    mkfontscale symlinks in the old X11R6 locations, pointing to the X11R7
    binaries.  This will provide backward compatibilty for Fedora Core 5, however
    3rd party developers and rpm package maintainers should update to using the
    new X11R7 locations immediately, as these compatibility links are temporary,
    and will be removed from a future OS release.
  - Remove system directories from file manifest to appease the banshees.


author: Mike A. Harris <mharris@redhat.com> 1:1.0.0-1
changelog:
  - Updated all utilities to version 1.0.0 from X11R7 RC4.
  - Updated font-util-1.0.0-mapdir-use-datadir-fix.patch to work with RC4.
  - Added font-util-1.0.0-autoconf-add-with-fontdir-option.patch to add a new
    variable "fontdir" to the fontutil.pc file which all of the font packages
    can autodetect and use instead of having to put manual fontdir overrides
    in every single rpm package.


author: Mike A. Harris <mharris@redhat.com> 1:0.99.2-1
changelog:
  - Updated bdftopcf, fonttosfnt to version 0.99.3, and mkfontdir, mkfontscale,
    and font-util to version 0.99.2 from X11R7 RC3.
  - Changed manpage dir from man1x back to man1 due to another upstream change.
  - Added fontutil.m4 to file manifest.


author: Mike A. Harris <mharris@redhat.com> 1:0.99.1-1
changelog:
  - Changed package version to 0.99.1 to match the upstream font-util tarball
    version, and added "Epoch: 1" to the package for upgrades.
  - Added font-util-0.99.1-mapdir-use-datadir-fix.patch to fix the font-util
    mapfiles data to install into datadir instead of libdir (#173943)
  - Added "Requires(pre): libfontenc >= 0.99.2-2" to force a version of
    libfontenc to be installed that fixes bug #173453, and to also force it
    to be installed before xorg-x11-font-utils in a multi-package rpm
    transaction, which will ensure that when font packages get installed
    during upgrades via anaconda or yum, that the right libfontenc is being
    used by mkfontscale/mkfontdir.
  - Added ">= 0.99.2-2" to BuildRequires for libfontenc, as a convenience to
    people rebuilding xorg-x11-font-utils, as they'll need to install the new
    libfontenc now anyway before they can install the font-utils package.


author: Mike A. Harris <mharris@redhat.com> 6.99.99.901-3
changelog:
  - Glob util/map-* files in file manifest.
  - Added missing "Obsoletes: xorg-x11-font-utils".
  - Added "BuildRequires: pkgconfig".


author: Mike A. Harris <mharris@redhat.com> 6.99.99.901-1
changelog:
  - Updated bdftopcf, fonttosfnt, mkfontdir, mkfontscale to version 0.99.1 from
    X11R7 RC1.
  - Bumped package version to 6.99.99.901, the X11R7 RC1 release version tag.
  - Updated file manifest to to find the manpages in "man1x".


author: Jason Vas Dias <jvdias@redhat.com> - 3.1.8-81
changelog:
  - rebuild for new gcc, glibc, glibc-kernheaders
  - workaround new refusal of /usr/bin/install to chown


author: Jason Vas Dias <jvdias@redhat.com> 3.1.8-78
changelog:
  - fix bug 159220: add pam_loginuid to pam session stack in /etc/pam.d/atd 
  - fix bug 102341: add '-r' synonym for '-d' / atrm for POSIX / SuS conformance


author: Jason Vas Dias <jvdias@redhat.com> 3.1.8-68
changelog:
  - Put PAM authentication check in 'check_permissions()', so
  - user can know when using at(1) if PAM permission is denied.


author: Jason Vas Dias <jvdias@redhat.com> 3.1.8-60
changelog:
  - fix bug 131510: no_export env. var. blacklisting should not
  - remove 'SHELL' when only 'SHELLOPTS' is blacklisted.
  - at(1) man-page should not say 'commands are run with /bin/sh'
  - and should explain usage of SHELL environement variable and
  - details of blacklisted variables.


author: Jason Vas Dias <jvdias@redhat.com>
changelog:
  - Had to disable the 'make test' for the build BEFORE
  - any changes were made (building on FC2 - perl issue?)
  - test.pl generates these 'errors' for what looks like
  - valid output to me:
  -   $ ./test.pl 2>&1 | egrep -v '(^ok$)|(time_only)'
  -   1..3656
  -   not ok
  -   'Monday - 1 month': 'Fri Jul  2 18:29:00 2004' =? 'Sat Jul  3 18:29:00 2004'
  -   not ok
  -   'Monday - 10 months': 'Thu Oct  2 18:29:00 2003' =? 'Fri Oct  3 18:29:00 2003'
  -   not ok
  -   'next week - 1 month': 'Mon Jul  5 18:29:00 2004' =? 'Tue Jul  6 18:29:00 2004'
  -   not ok
  -   'next week - 10 months': 'Sun Oct  5 18:29:00 2003' =? 'Mon Oct  6 18:29:00 2003'
  - will investigate and fix for next release.


author: Jens Petersen <petersen@redhat.com> - 3.1.8-49
changelog:
  - replace at-3.1.8-SHELL-91233.patch by at-3.1.8-SHELL-111386.patch which
    now executes $SHELL directly in the at shell script after all the variables
    have been setup with /bin/sh (#91233) [suggested by Göran Uddeborg]
  - this changelog is now in utf-8


author: Dan Walsh <dwalsh@redhat.com> - 3.1.8-47.sel
changelog:
  * Fri Jun 20 2003 Jens Petersen <petersen@redhat.com> - 3.1.8-46
  - add at-3.1.8-atrun.8-typo-97697.patch to fix typo in atrun.8 (#97697)
  - update at.1 description of shell behaviour (#91233)


author: Jens Petersen <petersen@redhat.com> - 3.1.8-41
changelog:
  - update source to at_3.1.8-11 from debian upstream
    - update source url
    - at-debian.patch no longer needed
    - at-3.1.7-paths.patch: the patch to "at.1.in" no longer needed
    - replace at-3.1.8-lexer.patch with at-3.1.8-11-lexer-parser.diff
    - at-3.1.8-dst.patch no longer needed
    - at-3.1.8-lsbdoc.patch no longer needed
    - at-3.1.8-o_excl.patch no longer needed
    - bump release number
  - at-3.1.8-test.patch: move out test.pl to a separate source file
    - apply at-3.1.8-test-fix.patch to it and drop patch
  - at-3.1.8-shell.patch: drop (#22216,#91233)
  - run "make test" after building
  - add "--without check" rpmbuild option
  - fix autoconf comment to point to right patch
  - use _sysconfdir, _sbindir, _bindir, and _localstatedir


author: Bill Huang <bhuang@redhat.com>
changelog:
  - Fixed delaying job execution and missing starting jobs..(bug#69595)
    (Thanks Bujor D Silaghi <bujor@cs.umd.edu> for his patch.)


author: Bill Huang <bhuang@redhat.com>
changelog:
  - Fixed cleaning atq and  multiple atd daemon.(bug#67414)
    (Thanks Bujor D Silaghi <bujor@cs.umd.edu> for his patch.)


author: Adrian Havill <havill@redhat.com> 3.1.8-21
changelog:
  - fix man page (#51253)
  - fix env prop problem (#49491)
  - .SEQ should not be executable (#52626)
  - beefed up file creation perms against symlink exploits (O_EXCL)


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - applied enrico.scholz@informatik.tu-chemnitz.de's change to the env patch to 
  - address bug #46546


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - changed atd.init to start at 95, stop at 5, closing #15915
  - applied mailto:wp@supermedia.pl's environment patch


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - much love to David Kilzer <ddkilzer@lubricants-oil.com>
  - who nailed UTC, Leap year, DST, and some other edge cases down
  - he also wrote a test harness in perl
  - bug #28448


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - Well, we will likely never really close the UTC issues,
  - because of 1) fractional timezones, and 2) daylight savigns time.
  - but there is a slight tweak to the handling of dst in the UTC patch.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - move init script
  - add condrestart directive
  - fix post/preun/postun scripts
  - prereq initscripts >= 5.20


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - updated to at version 3.1.7
  - updated lock and sequence file handling with %ghost
  - Use chkconfig and atd, now conflicts with old crontabs packages


author: Bastien Nocera <bnocera@redhat.com> 1.0.1-6
changelog:
  - Using the libgnomeui stock icons requires to link against
    libgnomeui and init our app as a GNOME app, which we don't
    want to do. Use the evolution icon instead
  Related: rhbz#250403


author: Bastien Nocera <bnocera@redhat.com> 1.0.1-5
changelog:
  - Require libgnome in the glade file, so that the GNOME
    stock icons can be used
  Related: rhbz#250403


author: Alexander Larsson <alexl@redhat.com> - 0.4-5
changelog:
  - Build in Core
  - Move gaim plugin into main package
  - Fix up some build requirements
  - No bluetooth on s390*


author: Paul W. Frields <stickster@gmail.com> - 0.4-3
changelog:
  - Rearrange Requires and BuildRequires for subpackages
  - Include default Evolution plugin in main package


author: John (J5) Palmieri <johnp@redhat.com> - 0.3.1-9
changelog:
  - Add patch to fix struct handling in the dbus glib binding for dbus 0.61
    so image data works again


author: Christopher Aillon <caillon@redhat.com> - 0.3.1-6
changelog:
  - Add patch to determine whether a compositing manager is running
    when drawing a new notification bubble, as long as the CM grabs
    the appropriate XSelection.


author: Christopher Aillon <caillon@redhat.com> - 0.3.1-4
changelog:
  - Provide desktop-notification-daemon, since libnotify requires a
    notification deamon, but not this specific one.  Other notification
    daemons can exist on the system so long as they meet the provides
    (and the API of course).


author: Johnny Hughes <johnny@centos.org> - 2.0-37.el5.centos
changelog:
  - brought in CentOS Backgrounds (Source100)
  - patched to 5:4 aspect for desktop.xml file. (patch100)
  - did not remove default.jpg files.


author: Matthias Clasen <mclasen@@redhat.com> 2.0.24
changelog:
  - Prepopulate the list of backgrounds in the background
    changes with a small set of good backgrounds (#133382)
  - redhat-backgrounds-7


author: Havoc Pennington <hp@redhat.com>
changelog:
  - redo it, now it includes the tile/image collection
    redhat-backgrounds from CVS, plus propaganda
  - move things to datadir/share/backgrounds/images 
    and datadir/share/backgrounds/wallpapers
  - split into a small basic package and an extra package, 
    so we can have packages require the basic package
    without sucking in huge images
  - move space images into devserv CVS
  - move nautilus and kdebase tiles into devserv CVS


author: Jonathan Blandford <jrb@redhat.com>
changelog:
  - added propaganda tiles.  Spruced it up a bit
  - moved README files out of tarball, and into docs dir.


author: Karsten Hopp <karsten@redhat.de> 1.3.23-1
changelog:
  - update
  - new pylib patch
  - remove destdir patch, swig.m4 is no longer included
  - remove ldconfig patch, swig now uses *-config to find out linker options


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - use %{_tmppath} instead of /var/tmp
  - remove the postscript docs (pdftops from the xpdf pkg converts them just fine)


author: Marek Grac <mgrac@redhat.com> 2.3-3
changelog:
  - Resolves: bz#521891 - Replace #!/usr/bin/env python 
  - Resolves: bz#481380 - Obsolete EPEL package


author: Toshio Kuratomi <toshio@tiki-lounge.com> - 2.1-3
changelog:
  - Bump and rebuild for python 2.5 on devel.
  - Add BR: python-devel as it provides a header necessary for python modules
    on python 2.5.


author: Toshio Kuratomi <toshio@tiki-lounge.com> - 2.1-2
changelog:
  - Remove pyver define as it's not needed with the automatic python(abi).
  - Stop ghosting .pyos.
  - Let automatic python compilation take care of creating pyos.
  - Rebuild for FC6.


author: Toshio Kuratomi <toshio@tiki-lounge.com> 0.99999b-2
changelog:
  - Add LICENSE File.
  - Make noarch.
  - Remove executable permissions from the modules copied to examples.


author: Toshio Kuratomi <toshio@tiki-lounge.com> 0.999-2
changelog:
  - Use python_sitelib macro to resolve build issues on x86_64.
  - %ghost *.pyo
  - Install ANSI.py, screen.py, and FSM.py into the examples.  These are intended
    to suplement pexpect eventually but they are currently much less robust and
    not installed to by default.  But they are needed by some examples.
  - Use __python macro in build/install for consistency.
  - Add --skip-build to the invocation of setup.py in install.


author: Panu Matilainen <pmatilai@welho.com> 0.999-0.fdr.1
changelog:
  - get rid of distrel munging, buildsys does that...
  - update to 0.999
  - update doc and example tarballs
  - fix build on python <> 2.2
  - use -O1 in install to generate .pyo files instead of manually creating the files
  - require python-abi = pyver to get dependencies right


author: Mike A. Harris <mharris@redhat.com> 7.1-1
changelog:
  - Added xload-1.0.1-setuid.diff to fix potential security issue (#196094)
  - Artificially inflate package version-release to 7.1 to match the X11R7.1
    release that all of the tarballs are taken from.
  - Update to xconsole-1.0.2, xcursorgen-1.0.1 from X11R7.1
  - Add temporary dependency on autoconf, automake for brew builds.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Upgraded all apps to version 1.0.0 from X11R7 RC4.
  - Changed manpage dir from man1x to man1 to match upstream default now.
  - Dropped all of the datadir-cleanups patches added in the previous build.
  - Added x11perf-1.0.0-x11perf-datadir-cleanups.patch as it is still needed
    to put the helper scripts in datadir.
  - Added --disable-xprint to configure, as a great symbolic jesture.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-4
changelog:
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3" to workaround
    (#173384)
  - Added the following patches, and invoke aclocal/automake/autoconf on them
    to force app-defaults and other datafiles into _datadir instead of _libdir:
    - oclock-0.99.1-oclock-datadir-cleanups.patch
    - x11perf-0.99.1-x11perf-datadir-cleanups.patch
    - xclipboard-0.99.1-xclipboard-datadir-cleanups.patch
    - xclock-0.99.1-xclock-datadir-cleanups.patch
    - xconsole-0.99.2-xconsole-datadir-cleanups.patch
    - xload-0.99.1-xload-datadir-cleanups.patch
    - xlogo-0.99.1-xlogo-datadir-cleanups.patch
    - xmag-0.99.1-xmag-datadir-cleanups.patch
    - xmessage-0.99.1-xmessage-datadir-cleanups.patch
  - Added luit-0.99.1-luit-locale-dir-fix.patch to fix bug (#173702)


author: Mike A. Harris <mharris@redhat.com> 0.99.2-2
changelog:
  - Add "Obsoletes: XFree86, XFree86-tools, xorg-x11, xorg-x11-tools", as 
    various utils have moved here from there in monolithic X packaging.
  - Add "BuildRequires: xbitmaps-devel" for xbiff.
  - Rebuild against new libXaw 0.99.2-2, which has fixed DT_SONAME. (#173027)


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Initial build, with all apps taken from X11R7 RC2.
  - Use "make install DESTDIR=$RPM_BUILD_ROOT" as the makeinstall macro fails on
    some packages.
  - Temporary hack to move xcursorgen manpage to 'man1' dir.


author: Nalin Dahyabhai <nalin@redhat.com> 0.7.6-1
changelog:
  - correctly initialize NSS after the KDC detaches from the terminal, so that
    we can still read the on-disk database with NSS 3.12
  - fix new wire-incompatibilities with some implementations by making the
    version number of signed-data items configurable (fallout from #242109)


author: Nalin Dahyabhai <nalin@redhat.com> 0.7.5-1
changelog:
  - add configurable client-side certificate matching
  - add more configurable KDC acceptance criteria
  - fix wire-incompatibilities with some newer implementations (#242109)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix encoding/interpreting of e_data, encoding of DH parameters, error
    reporting for revoked certificates


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.5-1
changelog:
  - fix inclusion of the signer certifying chain now that we're careful to
    destroy certificates when we're finished with them (#223552)


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.4-1
changelog:
  - fix validation of signer certificates when the entire certifying chain isn't
    already known to us, but intermediate links are provided in signed-data
    (#223552)


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.3-1
changelog:
  - update preauth plugin support patch to base off of 1.5.1-1.6 diff
  - unref/free certificates, keys, contexts, and slots once we're finished
    using them (#221936)


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.1-1_pal18998
changelog:
  - implement a "mappings_file" option a la Heimdal's, so that we don't have
    to have the principal name encoded in the certificate's subjectAltName
    extension in order to accept it for a particular Kerberos identity (#212867)


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.0-1_pal18998
changelog:
  - fix protocol implementation errors which caused interop problems with Heimdal
  - update preauth plugin support backport to 1.6 branch, revision 18998


author: Nalin Dahyabhai <nalin@redhat.com> 0.2.0-1_pal18750
changelog:
  - implement DH-based key agreement
  - disable OCSP by default on the client-side (#209244)
  - update to changes for newer support backport


author: Doug Ledford <dledford@redhat.com> - 1.3.2-0.20080728.0355.el5.2
changelog:
  - Fix the openibd init script issue caused by using udevtrigger/udevsettle from
    the Fedora init script (the RHEL udev isn't new enough to safely use this
    method)
  - Resolves: bz465148


author: Doug Ledford <dledford@redhat.com> - 1.3.2-0.el5.20080728.0355.3
changelog:
  - Update the openibd init script to match the one from Fedora (much cleaner
    and easier to verify it is correct to all the standards)


author: Doug Ledford <dledford@redhat.com> - 1.3.2-0.el5.20080728.0355.0
changelog:
  - Make the init script not start the OFED stack by default
  - Add the ifup-ib file so we can support connected mode on ipoib
  - Remove various sleeps in the start/stop process that are no longer necessary
    now that the kernel properly tears down its resources
  - Resolves: bz451452


author: Doug Ledford <dledford@redhat.com> - 1.3-3
changelog:
  - Make the fixup-mtrr.awk script return a value that can be used in the
    init script to determine if we should reload the ib_ipath module


author: Doug Ledford <dledford@redhat.com> - 1.3-2
changelog:
  - Update the openibd init script to work with all hardware
  - Add fixup-mtrr.awk script to solve problems with ipath performance when
    memory type range registers don't allow creation of write-combining
    regions due to lazy BIOS programmers
  - Resolves: bz230035, bz437326, bz438776, bz439080, bz439082


author: Doug Ledford <dledford@redhat.com> - 1.3-1
changelog:
  - Gut the spec, gut the contents, leave only the base package to hold the
    initscripts and configs.  Everything else has been moved into individual
    packages.
  - Related: bz428197


author: Doug Ledford <dledford@redhat.com> - 1.2-5
changelog:
  - Further tweaking of init scripts to make them LSB compliant
  - Bump number to keep this package up to date with the rhel5 openib package


author: Doug Ledford <dledford@redhat.com> 1.2-1
changelog:
  - Update to final OFED 1.2 release
  - Fix init scripts to be standards compliant
  - Related: bz229298, bz182202, bz225581, bz243126


author: Doug Ledford <dledford@redhat.com> 1.1-5
changelog:
  - Fix an unterminated if statement in the ipoibha init script
  - Disable the ipoibtools package since arping is not yet modified to
    support ipoib interfaces and so the package is guaranteed not to work
  - Resolves: #227396


author: Doug Ledford <dledford@redhat.com> 1.1-4
changelog:
  - Change all the scriptlets to be multiline so that they don't cause problems
    on ppc arch
  - Related: #213848, #222227


author: Doug Ledford <dledford@redhat.com> 1.1-3
changelog:
  - Make openib, opensm, and ipoibtools Require(post): chkconfig (182845,182846)
  - Make ipoibha script have an interpreter tag
  - Fix the ipoibha script so it uses arping instead of arpingib and
    passes a functional set of arguments
  - Make ipoibha script require an IP broadcast address on the interface
    we are serving in ha mode
  - Make rdma_ping print rdma_ping instead of rping in it's usage output
  - Make rdma_ping only print the usage info once (213171)
  - Update openibd init script to work whether ipath driver is in one module
    or two (212401)


author: Doug Ledford <dledford@redhat.com> 1.1-2
changelog:
  - Remove a dead patch from the src rpm and rebuild
  - Move the ipoibha tools to /usr/sbin instead of /sbin.  Since they
    require perl to run, and perl resides in /usr, it's safe for them
    to be there instead of /sbin


author: Doug Ledford <dledford@redhat.com> 1.1-0.pre1.3
changelog:
  - The bug fix to make the udev rules file correct for udev 095 got lost,
    readd it.
  - Updates from the old OFED 1.0 code didn't grab all the RPMs because I
    forgot to update the libmthca{,-devel} versions so that the reset
    release number wouldn't cause it to match as older instead of newer.


author: Doug Ledford <dledford@redhat.com> 1.1-0.pre1.2
changelog:
  - Bump version numbers on all the packages to allow for updates
    from previous installations
  - Remove arpingib, it's not needed
  - Add ipoibha init script
  - Rename ipoibha.pl ipoibha for ease of use in init script
  - Drop hpage patch set from ./configure invocation


author: Doug Ledford <dledford@redhat.com> 1.0-10
changelog:
  - Add a logrotate file for /var/log/osm.log to opensm
  - Fix a %post/%postun script problem with dapl


author: Doug Ledford <dledford@redhat.com> 1.0-8
changelog:
  - Rename dat.conf to dat32.conf and dat64.conf so that multilib works properly
  - Patch dat libs to look for the right conf file depending on arch of lib


author: Doug Ledford <dledford@redhat.com> 1.0-7
changelog:
  - Use the action function in the openibd init script
  - Properly load hardware modules if not loaded already on startup
  - Make the output of the status command in the openibd init script more
    useful
  - Correct load/unload order of modules in openibd init script
  - Several other cleanups in the openibd init script


author: Doug Ledford <dledford@redhat.com> 1.0-6
changelog:
  - Skip 1.0-5 to make RHEL5 and FC6 trees match more closely
  - Update udev rules file for later udev version
  - Fix the location of the default osm.log file
  - Remove two modules from the openibd startup script that aren't shipped
    with the RHEL5 kernel


author: Doug Ledford <dledford@redhat.com> 1.0-3
changelog:
  - Gut and rewrite large portions of spec file to make FHS compliant
  - Use default rpmmacros to control file locations
  - Use spec file to control software build, not an external script
  - Make the spec file build what you want by default, not when passed options
  - Make spec file multilib compliant
  - Don't build kernel modules here, the kernel has what it needs
  - Rename packages slightly (no more kernel-ib, this is replaced by openib,
    make a few of the other packages have openib- prepended before their
    name in order to make the connection more noticeable)
  - Update to work with libsysfs >= 2.0.0
  - Many more changes that I forgot


author: Jason Vas Dias <jvdias@redhat.com> - 3.10-1
changelog:
  - fix bug 176720: upgrade to 3.10
  - make .spec file conform to fedora-rpmdevtools spectemplate-perl.spec


author: Jindrich Novy <jnovy@redhat.com> 1.76-2
changelog:
  - replace 
    CFLAGS="${CFLAGS:--O2}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu \
  	--target=noarch-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib64 \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info with ./configure to prevent definition of
    target, build and host for noarch package


author: Jindrich Novy <jnovy@redhat.com> 1.76-1
changelog:
  - we have separate texi2html package now (#121889)
  - fix Source0
  - BuildArchitectures -> BuildArch
  - create backups for patches


author: Zack Cerza <zcerza@redhat.com> - 0.6.0-1
changelog:
  - New upstream release.
  - Add Requires for xorg-x11-xinit.
  - Add Requires for gnome-python2-gconf.
  - Bump pyspi Requires.


author: Zack Cerza <zcerza@redhat.com> - 0.5.2-1
changelog:
  - New upstream release.
  - Update Requires from Xvfb to xorg-x11-server-Xvfb.
  - Bump pyspi Requires.
  - Remove ImageMagick Requires.
  - Escape post-macro in changelog-macro.


author: Zack Cerza <zcerza@redhat.com> - 0.5.1-1
changelog:
  - Remove BuildRequires on at-spi-devel. Added one on python.
  - Use macros instead of absolute paths.
  - Touch _datadir/icons/hicolor/ before running gtk-update-icon-cache.
  - Require and use desktop-file-utils.
  - postun = post.
  - Shorten BuildArchitectures to BuildArch. The former worked, but even vim's 
    hilighting hated it.
  - Put each *Requires on a separate line.
  - Remove __os_install_post definition.
  - Use Fedora Extras BuildRoot.
  - Instead of _libdir, which kills the build if it's /usr/lib64, use a
    python macro to define python_sitelib and use that.
  - Remove the executable bit on the examples in install scriptlet.
  - Remove call to /bin/rm in post scriptlet.
  - Use dist in Release.


author: Zack Cerza <zcerza@redhat.com> - 0.5.0-2
changelog:
  - It looks like xorg-x11-Xvfb changed names. Require 'Xvfb' instead.
  - Remove Requires on python-elementtree, since RHEL4 didn't have it. The 
    functionality it provides is probably never used anyway, and will most likely
    be removed in the future.
  - Don't run gtk-update-icon-cache if it doesn't exist.


author: Zack Cerza <zcerza@redhat.com> - 0.5.0-1
changelog:
  - New upstream release.
  - Added missing BuildRequires on at-spi-devel.
  - Added Requires on pyspi >= 0.5.3.
  - Added Requires on rpm-python, pygtk2, ImageMagick, xorg-x11-Xvfb, 
    python-elementtree.
  - Moved documentation (including examples) to the correct place.
  - Make sure /usr/share/doc/dogtail is removed.
  - Added 'gtk-update-icon-cache' to %post.


author: Jindrich Novy <jnovy@redhat.com> 5.5-11
changelog:
  - explicitly depend on lesstif to avoid nedit crashes
    (binary lesstif/openmotif incompatibilities) (#221535)
  - fix buildroot


author: Jindrich Novy <jnovy@redhat.com> 5.5-5
changelog:
  - update nedit file locations to new xorg standards (#167208, #170937)
  - rename nc to nedit-client to avoid conflict with netcat and
    modify its manpage to reflect this
  - fix License to GPL


author: Jindrich Novy <jnovy@redhat.com>
changelog:
  - added nedit icon to be present in menus #131601
  - updated spec to put it to the right place
  - icon made by Joor Loohuis (joor@users.sourceforge.net)
  - the icon processed by Peter Vrabec (pvrabec@usu.cz)


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Don't explicitly require openmotif, since rpm does library dependencies
    automatically.
  - Binary package doesn't require desktop-file-install.


author: Tim Waugh <twaugh@redhat.com> 5.3-6
changelog:
  - Add ugly hack to work around openmotif's lack of UTF-8 support (bug #75189).
  - Back-port 5.4RC2 fix for uninitialized variable (bug #110898).


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix crash while printing (#45149)
    I still think removing the package would be the better fix, though.


author: Tim Waugh <twaugh@redhat.com> 3.1-27.2
changelog:
  - Preserve file modes (bug #437465).
  - Applied patch to fix segfault with missing -c argument (bug #429231).


author: Miloslav Trmac <mitr@redhat.com> - 3.1-21
changelog:
  - Don't just delete the original file when destination and current directory
    are on different filesystems (#65548, #123069, patch by James Antill)
  - Fix return type of StripDelimiter in dos2unix-3.1-safeconv.patch (#136148)


author: Mike A. Harris <mharris@redhat.com> 3.1-20
changelog:
  - Added dos2unix-3.1-manpage-update-57507.patch to fix manpage (#57507)
  - Added dos2unix-3.1-preserve-file-modes.patch to properly preserve file
    permissions (#91331,55183,112710,132145)


author: Elliot Lee <sopwith@redhat.com> 3.1-15
changelog:
  - Remove build dependency on perl, since perl BuildRequires: dos2unix,
    and there's no good reason not to just use sed here.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix bug #57700 (segfault)
  - Add the mac2unix symlink recommended in README
  - Fix compiler warnings


author: Steve Dickson <steved@redhat.com> 1.0.9-42
changelog:
  - mountd: Check host alias with netgroups (bz 478952)
  - exportfs: fixed typo in man page (bz 474848)
  - nfs.init: NFS server reboot results in "Stale NFS file handle" (bz 474449) 
  - nfslock.init: options not correctly parsed (bz 459591)
  - mount.nfs: mounts fail with read-only /etc (bz 450646)
  - nfslock.init: lockd not using settings in sysconfig/nfs (bz 434795)
  - tcpwrappers: updated code to correctly use api  (bz 494878)
  - nhfsstone: added v3 and v4 support (bz 465933)
  - mount.nfs: add support for lookupcache= option (bz 489335).


author: Steve Dickson <steved@redhat.com> 1.0.9-40
changelog:
  - Fixed arguments to the hosts_ctl() call in the good_client() 
    routine used in the tcpwrapper support. (bz 440120)


author: Steve Dickson <steved@redhat.com> 1.0.9-39
changelog:
  - Fixed typo in nfs initscript that caused rpc.rquotad daemons
    to be started but not stoppped (bz 470483)


author: Steve Dickson <steved@redhat.com> 1.0.9-38
changelog:
  - The fix to bz 438418 introduced a regression that caused
    mount.nfs to exit with zero on failed mounts. (bz 465966)


author: Steve Dickson <steved@redhat.com> 1.0.9-37
changelog:
  - Added the warning.patch to fix some warning which were
    flaged by rpmdiff during the errata phasea (Errata 2009:8187)

  - Re-enabled tcp wrappers. (bz 440120)


author: Steve Dickson <steved@redhat.com> 1.0.9-36
changelog:
  - Incorrect exit codes from nfs init script (bz 431891)
  - Incorrect a typo in nfsstat --mounted arg (bz 433741)
  - Fixed statd callbacks with the -n arg (bz 451057)
  - Do not display zero stats with nfsstat (bz 437242)
  - Pre-load nfsd when args to rpc.nfsd are given (bz 441983)
  - Increase the number simultaneous krb5 mounts (bz 432879)
  - Have rpc.gssd use file ownership vs uid on cred file (bz 433751)


author: Steve Dickson <steved@redhat.com> 1.0.9-33
changelog:
  - In both rpcgssd and rpcsvcgssd initscrips move the 
    SECURE_NFS check back to be a global check. This
    stops false failures from happen when the services
    are stopped when they are not configured to start (bz 435267)


author: Steve Dickson <steved@redhat.com> 1.0.9-30
changelog:
  - Added in a number of bug fixes (esp in crossmnt code) that were 
    exposed during the secinfo testing. (bz 315401)


author: Steve Dickson <steved@redhat.com> 1.0.9-29
changelog:
  - Added SECINFO support (bz 315401)
  - Reworked init scripts so service will be able to
    stop when some of the checks fail. (bz 295911)


author: Steve Dickson <steved@redhat.com> 1.0.9-27
changelog:
  - Fixed nfs initscript to fail with rpc.mound fails (bz 250622) 
  - Fixed typo in rpc.mountd man page (bz 248543)
  - Turn on 'nohide' automatically for all refer exports (bz 313561)


author: Jeff Layton <jlayton@redhat.com> 1.0.9-26
changelog:
  - Add new mountd mode for handling many netgroups (bz 250609)
  - Change nfs init script to not reset lockd ports on stop (bz 313671)
  - Change nfslock script to use sysctls to set lockd ports (bz 313671)


author: Steve Dickson <steved@redhat.com> 1.0.9-23
changelog:
  - Changed rpcidmapd and rpcgssd stop priority levels so
    those daemons would be stoppped after autofs (bz 245376)
  - Updated some out-of-date man pages (bz 233903)
  - Stoppped mount.nfs from wasting reserve ports (bz 246254)


author: Steve Dickson <steved@redhat.com> 1.0.9-22
changelog:
  - Reworked returns values of the init scripts (bz 243703)
  - Reworked rpc init scripts so they are not dependent
    loading modules. (bz 241015).


author: Steve Dickson <steved@redhat.com> 1.0.9-19
changelog:
  - Make sure the condrestarts exit with a zero value (bz 240352)
  - Added -o nordirplus mount option to disable READDIRPLUS (bz 240357)
  - Stopped /etc/sysconfig/nfs from being overwritten on updates (bz 234543)


author: Steve Dickson <steved@redhat.com> 1.0.9-18
changelog:
  - Fix mount.nfs4 to display correct error message (bz 227212)
  - Fix mount.nfs so mtab is updated (bz 227988)
  - Eliminate timeout on nfsd shutdowns (bz 222001)
  - Eliminate memory leak in mountd (bz 239536)
  - Make sure statd uses correct uid/gid by chowning
    the /var/lib/nfs/statd with the rpcuser id. (bz 235216)
  - Correct some sanity checking in rpc.nfsd. (bz 220887)
  - Fixed mount.nfs mtab lock (bz 227985)
  - Have mountd hold open etab file to force inode number to change (bz 236823)
  - Create a /etc/sysconfig/nfs with all the possible init script
    variables (bz 234543)
  - Changed nfs initscript to exit with correct value (bz 221874)
  - Added userlevel support for v4 relocation support (bz 223053)


author: Steve Dickson <steved@redhat.com> 1.0.9-14
changelog:
  - Doing a connect on UDP sockets causes the linux network
    stack to reject UDP patches from multi-home server with
    nic on the same subnet. (bz 208244)


author: Karel Zak <kzak@redhat.com> 1.0.9-7
changelog:
  - Added support for the mount -s (sloppy) option (#205038)
  - Added nfs.5 man page from util-linux
  - Added info about [u]mount.nfs to the package description


author: <SteveD@RedHat.com> 1.0.9-6
changelog:
  - Removed the compiling of getiversion and getkversion since
    UTS_RELEASE is no longer defined and these binary are
    not installed.


author: <SteveD@RedHat.com> 1.0.9-5
changelog:
  - Changed gssd daemons to cache things in memory
    instead of /tmp which makes selinux much happier.
    (bz 203078)


author: <SteveD@RedHat.com> 1.0.9-2
changelog:
  - Enabled the creating of mount.nfs and umount.nfs binaries
  - Added mount option fixes suggested by upstream.
  - Fix lazy umounts (bz 169299)
  - Added -o fsc mount option.


author: <SteveD@RedHat.com> 1.0.8-3
changelog:
  - Split the controlling of nfs version, ports, and protocol 
    into two different patches
  - Fixed and added debugging statements to rpc.mountd.
  - Fixed -p arg to work with priviledged ports (bz 156655)
  - Changed nfslock initscript to set LOCKD_TCPPORT and
    LOCKD_UDPPORT (bz 162133)
  - Added MOUNTD_NFS_V1 variable to version 1 of the
    mount protocol can be turned off. (bz 175729)
  - Fixed gssd to handel mixed case characters in
    the domainname. (bz 186069)


author: Steve Dickson <SteveD@RedHat.com> 1.0.8.rc2-4.FC5
changelog:
  - Added new libnfsidmap call, nfs4_set_debug(), to rpc.idmapd
    which turns on debugging in the libarary.


author: Steve Dickson <SteveD@RedHat.com> 1.0.8.rc2-3.FC5
changelog:
  - Added innetgr patch that changes configure scripts to 
    check for the innetgr function. (bz 177899)


author: Steve Dickson <SteveD@RedHat.com> 1.0.8.rc2-1.FC5
changelog:
  - Updated to 1.0.8-rc2 release
  - Broke out libgssapi into its own rpm
  - Move librpcsecgss and libnfsidmap in the new nfs-utils-lib rpm
  - Removed libevent code; Required to be installed.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-19
changelog:
  - Updated to latest code in SourceForge CVS
  - Updated to latest CITI patches (1.0.7-4)
  - Fix bug in nfsdreopen by compiling in server defaults


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-18
changelog:
  - Updated libnfsidmap to 0.11
  - Updated libgssapi to 0.5
  - Made sure the gss daemons and new libs are
    all using the same include files.
  - Removed code from the tree that is no longer used.
  - Add ctlbits patch that introduced the -N -T and -U
    command line flags to rpc.nfsd.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-17
changelog:
  - Updated to latest nfs-utils code in upstream CVS tree
  - Updated libevent from 1.0b to 1.1a
  - Added libgssapi-0.4 and librpcsecgss-0.6 libs from CITI


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-16
changelog:
  - Reworked the nfslock init script so if lockd is running
    it will be killed which is what the HA community needs. (bz 162446)
  - Stopped rpcidmapd.init from doing extra echoing when
    condstart-ed.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-12
changelog:
  - Changed useradd to use new -l flag (bz149407)
  - 64bit fix in gssd code (bz 163139)
  - updated broken dependencies
  - updated rquotad to compile with latest
    quota version.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-4
changelog:
  - Fixed a compile error on x86_64 machines in the gss code.
  - Updated the statd-notify-hostname.patch to eliminate 
    a segmentation fault in rpc.statd when an network 
    interface was down. (bz 151828)


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-3
changelog:
  - Changed xlog to use LOG_INFO instead of LOG_DEBUG
    so debug messages will appear w/out any config
    changes to syslog.conf.
  - Reworked how /etc/exports is setup (bz 151389)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added support to rpcgssd.init and rpcsvcgssd.init scripts
    to insmod security modules.
  - Changed the nfs.init script to bring rpc.svcgssd up and down,
    since rpc.svcgssd is only needed with the NFS server is running.


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Fix problem in idmapd that was causing "xdr error 10008"
    errors (bz 142813)
  - make sure the correct hostname is used in the SM_NOTIFY
    message that is sent from a rebooted server which has 
    multiple network interfaces. (bz 139101)

  - Changed nfslock to send lockd a -KILL signal
    when coming down. (bz 125257)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Replaced a memcopy with explicit assignments
    in getquotainfo() of rquotad to fix potential overflow
    that can occur on 64bit machines. (bz 138068)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added "$RQUOTAD_PORT" variable to nfs.init which
    allows the rpc.rquotad to use a predefined port
    (bz# 124676)


author: <SteveD@RedHat.com
changelog:
  - Incorporate some clean up code from Ulrich Drepper (bz# 134025)
  - Fixed the chkconfig number in the rpcgssd, rpcidmapd, and 
    rpcsvcgssd initscrpts (bz# 132284)


author: <SteveD@RedHat.com>
changelog:
  - Make sure the uid/gid of nfsnobody is the
    correct value for all archs (bz# 123900)
  - Fixed some security issues found by SGI (bz# 133556)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Major clean up. 
  - Removed all unused/old patches
  - Rename and condensed a number of patches
  - Updated to CITI's nfs-utils-1.0.6-13 patches


author: <SteveD@RedHat.com>
changelog:
  - nfslock stop is now done on package removals
  - Eliminate 3 syslog messages that are logged for
    successful events.


author: <SteveD@RedHat.com>
changelog:
  - Fixed syntax error in nfs initscripts when
    NETWORKING is not defined
  - Removed sync warning on readonly exports.
  - Changed run levels in rpc initscripts.
  - Replaced modinfo with lsmod when checking
    for loaded modules.


author: <SteveD@RedHat.com>
changelog:
  - Removed the auto option from MOUNTD_NFS_V2 and
    MOUNTD_NFS_V3 variables. Since v2 and v3 are on
    by default, there only needs to be away of 
    turning them off.


author: <SteveD@RedHat.com>
changelog:
  - Changed the permission on idmapd.conf to 644
  - Added mydaemon code to svcgssd
  - Updated the add_gssd.patch from upstream


author: <SteveD@RedHat.com>
changelog:
  - Created a pipe between the parent and child so 
    the parent process can report the correct exit
    status to the init scripts
  - Added SIGHUP processing to rpc.idmapd and the 
    rpcidmapd init script.


author: <SteveD@RedHat.com>
changelog:
  - Made the nfs4 daemons initscripts work better when 
    sunrpc is not a module
  - added more checks to see if modules are being used.


author: <SteveD@RedHat.com>
changelog:
  - Added the shutting down of the rpc v4 daemons.
  - Updated the Red Hat only patch with some init script changes.


author: <SteveD@RedHat.com>
changelog:
  - Added the addition and deletion of rpc_pipefs to /etc/fstab
  - Added the addition and deletion of module aliases to /etc/modules.conf


author: <SteveD@RedHat.com>
changelog:
  - Removed gssd tarball and old nfsv4 patch.
  - Added new nfsv4 patches that include both the
     gssd and idmapd daemons
  - Added redhat-only v4 patch that reduces the
     static librpc.a to only contain gss rpc related
     routines (I would rather have gssd use the glibc 
     rpc routines)
  -Changed the gssd svcgssd init scripts to only
     start up if SECURE_NFS is set to 'yes' in
     /etc/sysconfig/nfs


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added the setting of lockd ports via sysclt interface
  - Removed queue setting code since its no longer needed


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - "service nfs restart" should start services even if currently 
  -   not running (#59469)
  - bump version to 0.3.3-4


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - don't install any rquota pages in _mandir: (#39707, #44119)
  - don't try to manipulate rpc.rquotad in init scripts 
  -   unless said program actually exists: (#43340)


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - Fix incorrect file specifications in statd manpage.
  - Require gawk 'cause it's used in nfslock init script.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - switch to nfs-utils as the base tree
  - fix the statfs patch for the new code base
  - single package that obsoletes everything we had before (if I am to keep
    some traces of my sanity with me...)


author: Michael K. Johnson <johnsonm@redhat.com> x.2.14-1
changelog:
  - explicitly check for tux syscall not implemented (#102740)
  - explicitly express tux syscall # for s390x as well as s390 (#102740)


author: Matt Wilson <msw@redhat.com> x.2.13-1
changelog:
  - fix syscall number for ppc, ppc64 which is now 225, not 224 (#86366)
    from Julie DeWandle
  - fix buildreq for glib to be glib2


author: Michael K. Johnson <johnsonm@redhat.com> x.2.11-1
changelog:
  - Added support for 32-bit userland with 64-bit kernel
     o Requires new protocol version 3
     o major version of package matches protocol version
     o Package can be built to support protocol versions 2 and 3.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Preparing for new release:
    o  New, faster date routine
    o  Better command-line option handling
    o  Removed counttux now that tux2w3c has the -c option
    o  Fixed docroot/modulepath handling
    o  More info in tux2w3c


author: Phil Knirsch <pknirsch@redhat.com> - 5:1.3.3.3-1.el5
changelog:
  - Added missing gettext buildrequires
  - Fixed the XSLT httpd.conf file to be compatible with httpd-2.2 and newer


author: Phil Knirsch <pknirsch@redhat.com> 1.3.3-1
changelog:
  - Rewrote XSLT backend to use libxslt-python instead of 4Suite
  - Fixed wrongly claimed "file has been manually modified" for fresh 1st run
    (#167633)
  - Updated pam config file to latest pam recommendation (#170629)


author: Phil Knirsch <pknirsch@redhat.com> 1.3.2-2
changelog:
  - Fixed the KeepAlive bug that was already fixed as errata for RHEL3 (#137815)
  - Fixed use of True and False instead of gtk.TRUE and gtk.FALSE (#153039)
  - Fixed traceback when no X-server is running
  - Fixed problem with ServerSignature setting (#156639)
  - Removed static /manual alias from httpd.conf template (#144239)
  - Updated gtk.mainloop() and gtk.mainquit() to new API names
  - Added pa translation file (#157826)


author: Phil Knirsch <pknirsch@redhat.com> 1.2.1-1
changelog:
  - Fixed problem with Error documents for non English languages (#115220)
  - Removed deprecated SSLLog and SSLLogLevel parameters (#115221)
  - Fixed SSL stuff (#115223)
  - Fixed not well-formed XSLT file (#119849)
  - Obsoletes redhat-config-httpd (#124106)
  - system-config-httpd docdir now is owned by package (#125750)


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed gnome.url_show() call for help pages (#110128).
  - Updated httpd.conf.xsl to latest httpd package (#107539).


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Include HIG patch from Jens Knutson and fixed remaining problems with it.
  - Really added Crotatin and a few other languages this time (#106601).


author: Phil Knirsch <pknirsch@redhat.com> 1.1.0-5
changelog:
  - Fixed problem with Allow from and Deny from (double from).
  - Included Croation translation (#106601).
  - Big change in 4Suite requires fix for the Xslt processing.


author: Phil Knirsch <pknirsch@redhat.com> 1.0.1-16
changelog:
  - Fixed absolute symlink for config files.
  - Fixed problem with startup error message without X11.
  - Fixed AllowOverride problem.
  - Fixed Listen parameter handling.
  - Fixed Allow and Deny parameter handling.


author: Phil Knirsch <pknirsch@redhat.com> 1.0.1-10
changelog:
  - Fixed missing Alias entry in XSLT conversion file (#71423).
  - Fixed wrong menu entry (apacheconf instead of redhat-config-httpd) (#71424).


author: Trond Eivind Glomsrød <teg@redhat.com> 0.8.1-1
changelog:
  - don't install desktop files in the kontrol-panel directory, it 
    now reads the standard location as well (#52719)
  - nn and no summaries in .desktop files were switched
  - Fix character set for es.po, pt.po and it.po
  - The COPYING filed listed as a doc-file weren't present in the tree
  - Mark various configuration files as %config


author: Philipp Knirsch <pknirsch@redhat.de> 0.8-7
changelog:
  - Added symlink to redhat-config-apache for tool nameing compatibility.
  - Fixed typo in po/pt_BR.po that prevented doing a make dist.


author: Philipp Knirsch <pknirsch@redhat.de> 0.8-4/3
changelog:
  - Fixed not working directory options removal (#45160)
  - Fixed missing libglade-devel build prereq (#44725)
  - Fixed missing ServerAlias entries in vhosts (#44320)


author: Philipp Knirsch <pknirsch@redhat.com> 0.8-3/2
changelog:
  - Fixed some autofoo issues in Makefile.am, specfile and autogen.sh 
  - Fixed Bugzilla bug #40004 (small typo in src/ApacheControl.py)


author: Philipp Knirsch <pknirsch@redhat.com> 0.8-2/1
changelog:
  - Added the Epoch: tag to avoid update problems with previous versions.
  - Added a nice srpm feature in the Makefile.am with which we can now easily
    make SRPMS directly from CVS (borrowed from the kernel CVS Makefile ;)


author: Jens Petersen <petersen@redhat.com> - 0.2.0-2
changelog:
  - add scim-sinhala-remove-timeout-206253.patch to remember previous key event
    for longer than a second (#206253)
  - add scim-sinhala-help-text-206114.patch to add some keymap help (#206114)


author: Jens Petersen <petersen@redhat.com> - 0.2.0-1
changelog:
  - update to scim-sinhala-trans 0.2.0 from new upstream cvs
  - no longer uses surrounding text (#200403)
  - update url and spec file
  - add scim-sinhala-trans-autogen-automake.patch to build with current automake


author: Mike A. Harris <mharris@redhat.com> 0.3.27-2.fc6
changelog:
  - Remove dependency on xorg-x11-server-sdk, and replace it with correct dep
    on "libxf86config-devel >= 1.1.1-7", and rebuild in order to pick up
    necessary fixes in the static library.
  - Use Fedora Extras style BuildRoot tag.
  - Use {?dist} tag in Release


author: Jeremy Katz <katzj@redhat.com> - 0.3.20-1
changelog:
  - the X server compiles in the path for rgb.txt, so don't explicitly list 
    (fixes for the path move with modular X)
  - get rid of no longer needed %preun
  - modular X buildrequires changes


author: Mike A. Harris <mharris@redhat.com> - 0.3.18-1
changelog:
  - Do not write out XkbRules line to config file, as it is unnecessary hard
    coding the rules file, which has a built in default which should always
    work. (#120858)


author: Brent Fox <bfox@redhat.com> 0.3.15-1
changelog:
  - remove the setupMice() function createTemplate() 
  - because the 2.6 kernel puts both PS/2 and USB mice on the same device


author: Brent Fox <bfox@redhat.com> 0.3.10-1
changelog:
  - add a BuildRequires for python-devel
  - add an options attribute to the server layout section (for Xinerama)


author: Michael Fulbright <msf@redhat.com> 0.3.4-1
changelog:
  - remove code in xf86config.py:createTemplate() that inserted a Display
    section.  We want user to supply this and it shouldnt be in template.


author: Paul Nasrat <pauln@truemesh.com> - 0:0.12.3-0.fdr.1
changelog:
  - Revert to imakefile and XFree86-sdk
  - Include missing sdk headers - push upstream
  - don't build synclient and syndaemon for now


author: Jose Pedro Oliveira <jpo@di.uminho.pt> - 1.48-4
changelog:
  - (#154762)
  - License information: GPL or Artistic
  - Removed the Time::HiRes building requirement (see Changes)
  - Removed the empty .bs file
  - Corrected file permissions


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - build for main distribution
  - use %{_tmppath}
  - change name of specfile
  - don't use a find script to generate file lists
  - general cleanup
  - add descriptive summary and description


author: Ondrej Vasik <ovasik@redhat.com> 1:3.13-1.2.4
changelog:
  - comment out examples in sample quotatab(bz #435995)
  - Used #include <sys/quota.h> instead of <linux/quota.h> in
    quotactl manpage(bz #431978)
  - always resolve numeric usernames(bz #234558)


author: Philip Copeland <bryce@redhat.com> 3.06-5
changelog:
  - added --with-ext2direct=no to fix #73244
    without this users with UID's > 65535 will not
    be able to exist on a quota enabled FS


author: Philip Copeland <bryce@redhat.com> 3.06-3
changelog:
  - Bah, I'd dropped epoch from the spec file but seems
    we need this if you want to upgrade as the epoch
    number has precedence over the version/release
    numbers.


author: Philip Copeland <bryce@redhat.com> 3.06-1
changelog:
  - Ditched the 3.01-pre9 src base for 3.06
    Rebuilt without any patchs

  ============================================================


author: Preston Brown <pbrown@redhat.com>
changelog:
  - fixed bug #52075 (problem with ext2 labels)
  - backup data files off by default in quotacheck, optional backup flag added
  - fix bug where giving a bad directory or device would cause 
    quotaon/quotacheck to simulate "-a" behaviour
  - if a device name (i.e /dev/hda1) is passed, look up the corresponding mount
    point


author: Preston Brown <pbrown@redhat.com>
changelog:
  - quota 3.00 is required by recent kernel 2.4 changes
  - no warnquota included this time, not yet ported
  - quite a bit of work on quotacheck to make is backwards compatible
  - we will likely go back to "quota 2.00" as these projects merge...


author: Preston Brown <pbrown@redhat.com>
changelog:
  - 2.00 final, rolls in pretty much all our patches. :)
  - fix reporting of in use dquot entries from quotastats
  - change repquota man page to fix documentation of -v (#10330)
  - include warnquota.conf


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 6.3.6-1.1
changelog:
  - Fix APOP vulnerability (CVE-2007-1558)
    Resolves: #241196
  - Fix broken support for KPOP
    Resolves: #224018


author: Miloslav Trmac <mitr@redhat.com> - 6.3.3-2
changelog:
  - Fix some type mismatches on 64-bit architectures
  - Fix checking for res_* on architectures with newer glibc ABI


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - switch to Robert Scheck's fix for capa probing endless loop on pop servers
    which don't support capa (#115474)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - split the use-correct-service-name and check-for-gssapi-in-pop portions of
    gssapi+pop fix into pieces
  - only trigger pop capa probe if authentication method != password


author: Nalin Dahyabhai <nalin@redhat.com> 6.2.0-8
changelog:
  - add patch to not truncate headers which have been munged to include a
    hostname where one didn't exist before (CAN-2003-0792), backport from fix
    for 6.2.4 included in 6.2.5


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add patch to reject bogusly large message counts, backported from 5.9.10
  - build for RHL 6.2 errata


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix handling of "any" authentication (#32527)
  - accept more arguments to --auth
  - parse "auth password" correctly in the configuration file


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 5.7.2
  - call AC_PROG_MAKE_SET in configure.in
  - fix various things which cause it to not compile if gssapi is enabled


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - version 5.2.7
  - add patch so that fetchmailconf will not output ssl configure statements
    is no ssl is configured


author: Mike A. Harris <mharris@redhat.com> 0.99.2-3
changelog:
  - Ok, even though I _tested_ it, and it worked..  the previous build had a
    broken post, preun, and postun script, due to copy and paste error.  Ugh.
    Also, the script in /usr/bin was broken due to heredoc variable
    interpolation, which I turned off this time so it is generated correctly.
    I removed the post, preun, postun scripts as they are overkill anyway.
    The bug in 0.99.2-2 might cause upgrade or uninstall of the package to
    fail and require manual uninstallation with --noscripts.  Oops.  This
    is what "rawhide" means boys and girls.
  - Added "Requires(pre): filesystem >= 2.3.7-1", to avoid problems with older
    versions of it, and to allow packages that need this workaround to only
    have to set a dependency on xorg-x11-filesystem instead of both packages.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-2
changelog:
  - Updated scripts so that they create the directory even if the symlink was
    not present, to ensure that the dir exists first and avoid theoretical
    case in which, in a single transaction, xorg-x11-filesystem gets installed,
    no symlink or dir is present causing the symlink test to fail, so no dir
    gets created, then another package in the transaction set installs a
    symlink, then a package tries to install a dir and fails.  This should
    guarantee now that these two dirs are really really dirs, not symlinks
    for sure for sure.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Initial build.
  - Package creates the directories /usr/lib/X11 and /usr/include/X11 and owns
    them as properly flagged dirs in the file manifest.
  - Added identical pre/post/preun/postun scripts which test to see if any of
    of each of /usr/include/X11 /usr/lib/X11 /usr/lib64/X11


author: Matthias Clasen <mclasen@redhat.com> - 2.16.0-3
changelog:
  - Backport a number of fixes from 2.16.2 (216821, 216823,
    216824, 216825, 216826, 216828, 216829, 216830)


author: John (J5) Palmieri <johnp@redhat.com> 2.9.91-2
changelog:
  - Reenabled BuildRequires for hal-devel >= 0.5.0
  - Added (Build)Requires for nautilus-cd-burner(-devel) >= 2.9.6


author: Colin Walters <walters@redhat.com> 0.5.14-1
changelog:
  - New upstream
  - This release fixes corruption on re-read, upstream 153085
  - Remove upstreamed sound-juicer-0.5.13-prefs-crash.patch


author: Colin Walters <walters@redhat.com> 0.5.12-1
changelog:
  - New upstream version 0.5.12
  - Delete upstreamed patch sound-juicer-0.5.9-pref-help.patch
  - Delete upstreamed patch sound-juicer-0.5.10-gstreamer.patch
  - Delete call to autoconf


author: Brent Fox <bfox@redhat.com> 0.5.2-2
changelog:
  - spec file cleanups
  - add exclude arch for ia64, x86_64, ppc64, and s390x
  - add %file macros 
  - remove Requires for gstreamer-cdparanoia and gstreamer-vorbis


author: Mike A. Harris <mharris@redhat.com> 1.0.1.3-1
changelog:
  - Updated xorg-x11-drv-keyboard to version 1.0.1.3 from X11R7.0
  - Added alpha/sparc/sparc64 to ExclusiveArch list (#176590)


author: Mike A. Harris <mharris@redhat.com> 1.0.1.2-1
changelog:
  - Updated xorg-x11-drv-keyboard to version 1.0.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for keyboard input driver generated automatically
    by my xorg-driverspecgen script.


author: Miloslav Trmač <mitr@redhat.com> - 2.9.7-1.1.el5.2
changelog:
  - Use the maximum of atime, mtime and ctime when checking whether a file is
    obsolete
    Resolves: #373301


author: Miloslav Trmac <mitr@redhat.com> - 2.9.7-1.1.el5.1
changelog:
  - Fix some format string mismatches (backport from 2.9.8)
  - Automatically exclude aquota.{group,user} files in filesystem root
    directories (backport from 2.9.10)
    Resolves: #213654


author: Miloslav Trmac <mitr@redhat.com> - 2.9.6-1
changelog:
  - Add --exclude-user (original patch by Brett Pemberton)
  - Fix too long line in /etc/cron.daily/tmpwatch


author: Miloslav Trmac <mitr@redhat.com> - 2.9.3-1
changelog:
  - Silently ignore ENOENT if somebody removes files faster than us (#154960)
  - Handle failures to exec fuser
  - Fix check for negative grace periods


author: Miloslav Trmac <mitr@redhat.com> - 2.9.1-1
changelog:
  - Add --exclude, use it to preserve X socket directories (#107069)
  - Allow multiple directory arguments with relative paths (#91097)
  - Don't manually strip the binary


author: Mike A. Harris <mharris@redhat.com> 2.9.0-1
changelog:
  - Added Solaris/HPUX support to tmpwatch via patch from Paul Gear (#71288)
  - Rebuild in rawhide as 2.9.0-1


author: Mike A. Harris <mharris@redhat.com> 2.8.3-1
changelog:
  - Added support for large files with 64bit offsets by adding to CFLAGS
    -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 bug (#56961)


author: Preston Brown <pbrown@redhat.com> 2.8-1
changelog:
  - added a "nodirs" option which inhibits removal of empty directories.
  - Integrated race condition fixes from Martin Macok (#50148)
  - do not try to remove ext3 journal files (#50522)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - Patch from enrico.scholz@informatik.tu-chemnitz.de allows concurrent 
    usage of mtime, ctime, and atime checking (#19550).


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - use execle() instead of system() to get the correct return code, fixes from
    Jeremy Katz <katzj@linuxpower.org>


author: Preston Brown <pbrown@redhat.com>
changelog:
  - support for CTIME from jik@kamens.brookline.ma.us
  - fixes for fuser checks from Ian Burrell <iburrell@digital-integrity.com>.
  - remove directories when empty without --all flag, to be consistent w/docs.


author: Paul Gear <paulgear@bigfoot.com>
changelog:
  - HP-UX port (including doco update)
  - Tweaked Makefile to allow installation into different base directory
  - Got rid of GETOPT_... defines which didn't do anything, so that short
    equivalents for all long options could be defined.
  - Fixed bug in message() where 'where' file handle was set but unused
  - Changed most fprintf() calls to message()


author: Preston Brown <pbrown@redhat.com>
changelog:
  - I am the new maintainer
  - fixed cleanup of directories
  - added --quiet flag
  - freshen manpage
  - nice patch from Kevin Vajk <kvajk@ricochet.net> integrated


author: Erik Troan <ewt@redhat.com>
changelog:
  - added man page to package
  - uses a buildroot and %attr
  - fixed error message generation for directories
  - fixed flag propagation


author: Martin Stransky <stransky@redhat.com> 2.0.0-2
changelog:
  - added pycairo to Requires
  - compacted card detection
  - fixed info and error dialog boxes
  - fixed configuration loading
  - fixed playback (added script)


author: Martin Stransky <stransky@redhat.com> 1.2.16-3
changelog:
  - fix for #183524 - scsound.log file not created after 
                      failing to configure sound card


author: Martin Stransky <stransky@redhat.com> 1.2.14
changelog:
  - fix for #170073 - Cannot configure snd-dummy
  - fix for #171545 - Please do not hard code file name into
  - fix for #156802 - Menu entry not localized


author: Martin Stransky <stransky@redhat.com> 1.2.12-4
changelog:
  - moved /usr/bin/alsaunmute and /usr/bin/alsacard to /bin
  - removed default_card (#134317)
  - added sorting for cards
  - added HW/SW config switch
  - added log file (/root/scsound.log)
  - added dialog for default audio device
  - set non-blocking mode for aplay


author: - Bastien Nocera <hadess@hadess.net> 1.2.11-1
changelog:
  - unmute the card we're about to play sound for when using ALSA
  - fix setting the volumes with amixer
  - Umute PCM-2 and "DRC Range" as well (#127863) (#146357)
  - Remove unneeded alsa-lib dep (#134319)
  - Remove use of deprecated gtk.FALSE and gtk.TRUE (#153053)
  - Scan the ISA and MacIO buses for soundcards (#146888)
  - Write an asound.conf file even when there's only one soundcard (#134339)
  - Don't crash when we can't find the default soundcard, or the description
    doesn't contain a space (#142801)
  - Use the plughw device to playback the test sample (#134335)


author: Bastien Nocera <bnocera@redhat.com>
changelog:
  - remove useless debug
  - remove use of deprecated Python functions,
  - list USB audio devices
  - don't crash if we can't get the whole maker/model
  - use aplay to play sounds on 2.6 kernels


author: Brent Fox <bfox@redhat.com> 1.1.0-1
changelog:
  - rename from redhat-config-soundcard into system-config-soundcard
  - add Obsoletes for redhat-config-soundcard
  - make changes for Python2.3


author: Jakub Jelinek <jakub@redhat.com> 0.4.0-2.el5
changelog:
  - add support for -c /etc/prelink.conf.d/*.conf in prelink.conf (#249889)
  - remove no longer existent directories from default prelink.conf (#248694)
  - reenabled prelink C++ optimizations which have not triggered any longer
    since _ZT[IV]* moved into .data.rel.ro section from .data
  - fixed performance issues in C++ optimizations, especially on GCJ
    CNI programs (#314051)
  - other performance improvements, prelink -avmR after prelink -ua now
    takes roughly 3m4s real time instead of 20m27s before
  - don't run TEXTREL tests if SELinux is enforcing (#245928)
  - don't leave temporary files behind on prelink --verify failures (#199251)
  - fix adjusting of .debug_ranges if end of range is at the end of some
    section and there is padding before the following one


author: Jakub Jelinek <jakub@redhat.com> 0.3.9-2.1
changelog:
  - blacklist libfreebl3.so and libsoftokn3.so, as nss does some
    FIPS mandated braindamaged integrity checking of these two libraries
    (#245775)


author: Jakub Jelinek <jakub@redhat.com> 0.3.9-1
changelog:
  - DT_GNU_HASH support
  - handle N_BNSYM and N_ENSYM stabs (#198203)
  - handle upgrades from prelink with smaller maxpagesize to prelink
    with larger maxpagesize (#196941)


author: Jakub Jelinek <jakub@redhat.com> 0.3.8-1
changelog:
  - fix -q mode canonicalization fix, speed up filename canonicalization
    by caching canonicalization for directories (#145983, #188062)
  - remove bogus e_shoff assertion check (#194016)
  - move prelink log file to /var/log/prelink/prelink.log (#194473)
  - increase x86-64 maxpagesize to 2MB


author: Jakub Jelinek <jakub@redhat.com> 0.3.7-1
changelog:
  - in -q mode, recheck the canonicalized filename to avoid
    overwriting symlinks with regular files (#145983, #188062)
  - allow prelinking of binaries with .tbss section


author: Jakub Jelinek <jakub@redhat.com> 0.3.6-3
changelog:
  - rebuilt again, disable -Wl,-z,nocopyreloc tests on x86_64,
    nocopyreloc really doesn't work on this platform (#180552)


author: Jakub Jelinek <jakub@redhat.com> 0.3.6-1
changelog:
  - remove kernel requires - installed kernel doesn't imply running
    kernel anyway and in FC5 kernels older than 2.4.20 can't be used
    anyway, as LinuxThreads are no longer included
  - don't relocate stabs N_{B,D,}SLINE (reported by Ashley Pittman)


author: Jakub Jelinek <jakub@redhat.com> 0.3.5-1
changelog:
  - support for ppc32 -msecure-plt libraries and binaries
  - don't crash if d_tag is invalid (#155605)
  - rebuilt against robustified libelf (CAN-2005-1704)
  - fix handling of libraries and binaries given on command
    line without any / characters in the filename


author: Jakub Jelinek <jakub@redhat.com> 0.3.4-1
changelog:
  - fix prelink -uo when linked against libselinux (#146637)
    and when the -o argument filename is on a different filesystem
    than the object that needs undoing


author: Jakub Jelinek <jakub@redhat.com> 0.3.3-1
changelog:
  - if layout code needs to re-prelink some library, make sure
    all libraries that depend on it are re-prelinked too (#140081)
  - add several more checks before deciding it is ok to prelink a binary
    (even if another bug like #140081 was in, these checks should hopefully
    catch it and refuse to (re-)prelink the binary)
  - added new PRELINK_NONRPM_CHECK_INTERVAL variable to /etc/prelink,
    defaulting to 7 days.  Prelink nightly job will not do anything
    if that interval has not elapsed since last prelinking and
    and the rpm database has not been modified since that prelinking.
    This is useful if you rely on rpm/up2date/yum/apt-rpm for library
    and binary updates.  If you combine it with other means (installs
    from source, tarballs etc.), you probably want to
    set PRELINK_NONRPM_CHECK_INTERVAL=0.
  - update prelink man page (#126468)


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-10
changelog:
  - support for non-absolute blacklist glob patterns (e.g. -b *.la)
  - cache information about non-prelinkable files (non-ELF, statically linked,
    too small .dynamic, DT_TEXTREL with conflicts against it; #132056)
  - other speedups for prelink -aq
  - for --verify, make sure only read-only fd's are opened for the
    unprelinked temporary file, otherwise a kernel might ETXTBUSY on it
    (#133317)
  - change warning message if some object's dependencies can't be found
  - add buildrequires libselinux-devel and use %{_tmppath} instead
    of /var/tmp in Buildroot (#132879)


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-6
changelog:
  - change sed separator in testsuite scripts from | to , if \|
    is present in regexps, as that invokes undefined behaviour
    which changed between GNU sed 4.0.9 and 4.1


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-2
changelog:
  - add 2 new TLS testcases (one that fails e.g. with glibc < 2.3.3-28
    on IA-32)
  - SPARC TLS support


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-1
changelog:
  - fix cxx.c:68: find_cxx_sym: Assertive `n < ndeps' failed problem
    on 32-bit architectures (#118522)
  - build prelink.cache into temporary file and atomically rename over
    (#121109)


author: Jakub Jelinek <jakub@redhat.com> 0.3.1-2
changelog:
  - unlink temporary files if renaming to the destination or setting of
    security context failed (#118251)
  - fix bi-architecture prelinking (#118226)
  - if prelink called from the cron script fails, note the exit status
    into /var/log/prelink.log


author: Jakub Jelinek <jakub@redhat.com> 0.3.1-1
changelog:
  - add prelink documentation (PDF format)
  - fix assertion failures on PPC (.sdynbss related, #115925)
  - fix prelink --help (#115202)
  - avoid free on uninitialized variable in one error path (#117332)
  - s/i386/%{ix86}/ to make mharris happy


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-21
changelog:
  - fix prelink abort in certain cases where a new PT_LOAD segment
    needs to be added (seen on AMD64)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-20
changelog:
  - clearify message about unlisted dependencies
  - don't do SELinux context copying if is_selinux_enabled () < 0


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-19
changelog:
  - refuse to prelink objects whose dependencies as reported by
    ldd don't include all dependencies transitively (this can
    happen when using RPATH and a shared library with the same
    SONAME exists both in that RPATH and either another RPATH
    or standard library directories)
  - add testcase for this
  - rework .dynsym/.symtab STT_SECTION translation, so that it works
    with binutils which put only sections not generated by the linker
    into .dynsym for shared libraries
  - fix make check, so that it is not confused by 2.6.x kernel
    VDSOs


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-18
changelog:
  - allow R_*_JU?MP_SLOT relocs to point also into .got.plt
    sections on IA32/AMD64/ARM/s390/s390x/SH


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-15
changelog:
  - blacklist support
  - use FTW_ACTIONRETVAL if available to avoid even stating of
    files in blacklisted directory trees
  - SELinux support


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-12
changelog:
  - added execstack tool
  - added -o option, to be used together with -u
  - free temp_filename in close_dso


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-11
changelog:
  - fix adjustement of DT_VALRNGLO .. DT_VALRNGHI and
    DT_ADDRRNGLO .. DT_ADDRRNGHI dynamic tags when relocating shared
    libraries
  - never adjust p_vaddr/p_paddr/p_offset of PT_GNU_STACK segment
  - allow shell wildcards in /etc/prelink.conf
  - fix REL->RELA conversion of shared libraries if .rel.dyn
    or .rel.plt are last sections in readonly PT_LOAD segment
  - force full reprelinking on prelink upgrades (well, first time
    the cron job is run after the upgrade)
  - require coreutils, findutils, util-linux, gawk and grep


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-8
changelog:
  - use /var/lib/misc/prelink.full instead of /var/run/prelink.full for last
    full prelink timestamp (#106721)
  - warn about UPX compressed binaries or libraries/binaries without section
    headers (neither can be prelinked obviously)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-7
changelog:
  - don't rely on malloc/calloc/realloc with size 0 returning a unique pointer
  - fix testsuite, so that it works even if installed glibc/libstdc++
    is already prelinked


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-5
changelog:
  - fix prelink segfault on -z nocombreloc libraries (#103404)
  - run one make check round with -Wl,-z,nocombreloc to test handling
    of nocombreloc binaries and libraries


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-3
changelog:
  - fix DT_CHECKSUM computation - do STT_LOCAL symbol frobbing and .mdebug
    updates write_dso would do also before checksum computation (#89953)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-2
changelog:
  - avoid assertion failures when changing PROGBITS .bss back into
    NOBITS .bss (#101813)
  - add 2 new tests for it


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-1
changelog:
  - run prelink from cron automatically, add /etc/sysconfig/prelink
    to configure it
  - update manual page


author: Jakub Jelinek <jakub@redhat.com> 0.2.1-2
changelog:
  - fix a thinko in the library path checking code
  - change R_386_GLOB_DAT into R_386_32 in .gnu.conflict, similarly
    R_X86_64_GLOB_DAT and R_X86_64_64
  - fix a bug in find_free_space which caused
    "section file offsets not monotonically increasing" errors on some
    IA-32 binaries
  - add --md5 and --sha options
  - use mmap during --verify if possible
  - add */lib64 directories to prelink.conf


author: Jakub Jelinek <jakub@redhat.com> 0.2.1-1
changelog:
  - make sure binaries prelinked for the second and later time without
    unprelinking in between verify correctly
  - make sure DT_CHECKSUM computation is the same for newly prelinked
    and second or later time prelinked libraries
  - dwarf2 abbrev hash bugfix
  - don't allow prelinking libraries outside directories specified
    in config file or on the command line
  - several new tests for reprelinking
  - pack non-alloced sections and section header table tightly after the
    last alloced section


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-28
changelog:
  - finish and enable ppc64
  - fix ppc BR{,N}TAKEN reloc handling
  - fix up sh_offset values of zero-sized or SHT_NOBITS section
    if ld messed them up
  - issue error about bogus library dependency chains instead of
    segfaulting (plus testcases for it)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-27
changelog:
  - add --quick mode
  - new test for --quick mode and also reprelinking of binary against
    upgraded shared library which needs more conflicts


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-26
changelog:
  - don't segfault in C++ optimizations if a conflict from undefined
    to defined value is seen
  - some more ppc64 work


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-25
changelog:
  - exec-shield support
  - with -R, don't randomize just base address from which all libs
    are layed out, but also slightly randomize order of libraries
    in the layout queue
  - add check-harder and check-cycle makefile goals in testsuite/,
    use it during rpm building


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-24
changelog:
  - optimize out conflicts in G++ 3+ virtual tables if they are just
    because some method has been called from a binary and thus there
    is a .plt slot in the binary. This change not only kills lots of conflicts
    on some KDE programs, but also should speed up runtime (not just startup
    time), since the hop through .plt is bypassed
  - added new C++ test
  - fix a bug in ppc64 fixup .plt code


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-23
changelog:
  - when updating dynamic tags for executable after section reshuffling,
    check section type as well, so that 0 sized sections don't get the
    tags attached instead of the proper ones
  - when an address space conflict is found between libraries for the same
    executable during layouting, check properly for all remaining conflicts
    as well


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-22
changelog:
  - don't adjust DT_REL{,A} if it is 0
  - allow prelinking of libraries with no dependencies
  - fix handling of libraries with no lazy relocs, no normal relocs or no
    relocs at all
  - some new tests
  - fix SH (Daniel Jacobowitz)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-20
changelog:
  - ppc TLS
  - some ppc64 work
  - avoid using trampolines for nested functions
  - fix typo in prelink man page (#89247)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-18
changelog:
  - fix section indices in .symtab if non-alloced sections weren't
    originally monotonically increasing
  - s390, s390x and Alpha TLS support


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-13
changelog:
  - use ELF_F_PERMISSIVE if defined
  - be permissive even when doing --reloc-only
  - fix up .plt section sh_entsize on Alpha


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-11
changelog:
  - make it work with elfutils instead of libelf 0.[78]
  - update to newer auto*/libtool
  - some more steps towards TLS support, at least --reloc-only should work


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-9
changelog:
  - enable on ppc and x86_64
  - fix ppc far PLT slot prelink
  - support --undo on ppc
  - for bug-compatibility with some unnamed OS changed R_SPARC_RELATIVE
    --undo
  - tiny steps towards TLS support on IA-32, more will come


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-8
changelog:
  - avoid putting garbage into executable's .gnu.liblist sh_link
    if we did not have to grow .dynstr
  - don't segfault on bogus sh_link and sh_info values (#72705)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-7
changelog:
  - when growing allocated shared lib sections (for REL->RELA
    conversion), make sure !PF_W and PF_W segments don't end up
    on the same page
  - when finding space for sections in an executable, make sure
    it is not included in between two reloc sections
  - for non-zero SHN_ABS symbols on 32-bit arches mask high
    32-bits of st_value (libelf 0.8.x is strict here)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-1
changelog:
  - added --undo and --verify mode
  - new architectures s390, s390x, arm, sh
  - handle binaries/shared libraries with non-allocated sections
    without monotonically increasing sh_offsets
  - handle .sbss and .sdynbss
  - fixed a bug in 64-bit LE/BE read routines
  - removed .rel{,a}.dyn reloc conversion/sorting, it was duplicating
    ld's -z combreloc and complicated lots of things
  - fixed STB_LOCAL/STT_SECTION symbol adjusting
  - use mkstemp for temporary files, allow --verify for binaries/libs
    on read-only filesystems
  - added DWARF-2 .debug_ranges adjustement, special case GCC's
    "set base to 0 and make things absolute instead of relative" trick
  - allow arches to override default layout mechanism (for ppc)
  - added some new tests, test --undo and --verify modes in the testsuite
  - alpha: adjust what R_ALPHA_GLOB_DAT points to too
  - i386: apply _32 and _PC32 REL relocs, as apply_rel can be called
    for C++ optimizations before REL->RELA conversion
  - ppc: layout strategy to satisfy ppc lib location preferences
  - sparc64: handle R_SPARC_DISP64
  - x86-64: adjust what R_X86_64_RELATIVE points to too
  - link prelink statically, esp. because of --verify mode
  - run make check during build process


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-7
changelog:
  - fix layout code so that -R works
  - on IA-32, when there are no R_386_PC32 relocs and no R_386_32 relocs
    with non-zero addend (= memory content), don't convert REL->RELA,
    only switch R_386_32 relocs to R_386_GLOB_DAT
  - support creating a new PT_LOAD segment if necessary, if SHT_NOBITS
    sections are small, instead of adding new PT_LOAD segment just add file
    backing to those NOBITS sections
  - added testsuite
  - new supported architectures (Alpha including .mdebug section support,
    Sparc, Sparc 64-bit, X86_64 (the last one untested)), beginning of PPC
    support


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-5
changelog:
  - fix sorting of .rel*.dyn sections, so that all RELATIVE relocs really
    come first
  - when DT_RELCOUNT already exists and conversion REL->RELA is done,
    convert it into DT_RELACOUNT
  - set conflict lookupent and conflictent to 0 for undefineds
  - don't bother with DT_REL*COUNT for apps, they cannot have any RELATIVE
    relocs


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-4
changelog:
  - brown paper bag time: when determining if conversion from REL to RELA
    is needed, check all non-PLT rel sections, including last.
    This caused prelinking to fail with -z combreloc compiled libraries.


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-3
changelog:
  - don't use .gnu.reloc section, use .rel.dyn or .rela.dyn instead
  - put RELATIVE relocs first, not last, so that DT_REL{,A}COUNT
    works
  - put in updated glibc patch
  - no need for special binutils patch - all is done in the -z combreloc
    patchset


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-2
changelog:
  - use the new DT_GNU_CONFLICT/DT_GNU_LIBLIST/SHT_GNU_LIBLIST constants
  - unlink *.#prelink# files if necessary


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-1
changelog:
  - fix layout.c
  - create .gnu.prelink_undo section, --undo and --verify modes will use that
  - some more C++ specific optimizations


author: Jakub Jelinek <jakub@redhat.com> 0.1.2-1
changelog:
  - bail out early if ELF object does not have sh_offsets
    monotonically increasing
  - disallow prelinking if there are conflicts against read-only
    segments in shared libraries (ie. non-pic shared libraries
    - this is better than bailing out for all non-pic shared libraries)
  - add some C++ specific optimizations to reduce number of conflicts,
    more to come


author: Jakub Jelinek <jakub@redhat.com> 0.1.1-1
changelog:
  - relocate stabs and dwarf-2 debugging formats
  - support both --all and incremental prelinking
  - handle hardlinks
  - limit to libraries in /etc/prelink.conf directories or
    directories from command line


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - improved the chat mode fix to allow specifying the remotename
    so that multiple wvdial instances can't step on each other.


author: Paul Nasrat <pnasrat@redhat.com> - 1.1.7-1
changelog:
  - Upgrade to latest upstream 1.1.x series
  - sqlite_prepare fix now upstream
  - Update url information


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-elographics to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for elographics input driver generated automatically
    by my xorg-driverspecgen script.


author: Doug Ledford <dledford@redhat.com>
changelog:
  - Initial import to RHEL-4 based upon Roland Drier's FC-4 package
  - Add /usr/lib/infiniband as an rpm owned directory and add a
    config entry to /etc/ld.so.conf.d


author: Kristian Høgsberg <krh@redhat.com> - 2.14.1-10
changelog:
  - Fix selection atom name intialization (patch from Kjartan Maaras).
  - Lower vte requirement to 0.12.0-2 which is what fc5-bling has.


author: Kristian Høgsberg <krh@redhat.com> 2.14.1-7
changelog:
  - Only use ARGB visual if a compositing manager is running to avoid
    slow-down caused by automatic compositor.


author: Kristian Høgsberg <krh@redhat.com> 2.14.1-5
changelog:
  - Fix gnome-terminal-2.14.1-real-transparency.patch to check for
    window->priv != NULL before dereferencing.


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.0.0
  - use desktop-file-install
  - put bonobo server file in file list
  - put help files in file list
  - apply some fixes from CVS (or rather, that I'm going to 
    check in to CVS soon)


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.20-4
changelog:
  - fix ppc32 plt reference counting
  - don't include /usr/lib/debug in the non-debuginfo package
    (#87729)


author: Petr Machata <pmachata@redhat.com> - 2.5.4a-39
changelog:
  - fileno is defined in posix standard, so adding #define _POSIX_SOURCE
    to compile without warnings (#195687)
  - dropping 183098 test, since the original bug was already resolved


author: Petr Machata <pmachata@redhat.com> - 2.5.4a-38
changelog:
  - Caught the real cause of #183098.  It failed because the parser
    built with `flex -f' *sometimes* made it into the final package, and
    -f assumes seven-bit tables.  Solution has two steps.  Move `make
    bigcheck' to `%check' part, where it belongs anyway, so that flexes
    built during `make bigcheck' don't overwrite original build.  And
    change makefile so that `make bigcheck' will *always* execute *all*
    check commands.


author: Petr Machata <pmachata@redhat.com> 2.5.4a-36
changelog:
  - Applying Jonathan S. Shapiro's bugfix-fixing patch. More std:: fixes
    and better way to silent warnings under gcc.


author: Petr Machata <pmachata@redhat.com> 2.5.4a-35
changelog:
  - Adding `std::' prefixes, got rid of `using namespace std'. (#115354)
  - Dummy use of `yy_flex_realloc' to silent warnings. (#30943)
  - Adding URL of flex home page to spec (#142675)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix generation of broken code (conflicting isatty() prototype w/ glibc 2.2)
    This broke, among other things, the kdelibs 2.0 build
  - Fix source URL


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.13-2
changelog:
  - build a separate, static set of libraries for openldap-devel with the
    non-standard ntlm bind patch applied, for use by the evolution-connector
    package (#125579), and installing them under
    %{evolution_connector_prefix} (/usr/lib/evolution-openldap)
  - provide openldap-evolution-devel = %{version}-%{release} in openldap-devel
    so that evolution-connector's source package can require a version of
    openldap-devel which provides what it wants


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.25-2
changelog:
  - change LD_FLAGS to refer to /usr/kerberos/lib instead of
    /usr/kerberos/lib, which might not be right on some arches


author: Ondrej Vasik <ovasik@redhat.com> - 3.4-2
changelog:
  - pax no longer fails to create ustar format archive if
    an absolute name is exactly 100 characters long (#239001)


author: Matt Wilson <msw@redhat.com>
changelog:
  - pull PAX source tarball from the SuSE package (which is based off
    this one yet claims copyright on the spec file)


author: Kristian Høgsberg <krh@redhat.com> 0:0.6.4-1
changelog:
  - Explicitly disable building tcl/tk panel
  - Add patch to remove hard-code i386 flags from Makefile.am
  - Use /usr/lib so it'll work on x86_64
  - Removed .la files, they are demon spawn
  - Don't try to build on arches that don't have xorg-x11


author: Tim Powers <timp@redhat.com>
changelog:
  - man pages in /usr/share/man (FHS compliant location)
  - grabbed spec from contrib
  - initial build for Powertools


author: Timo Karjalainen <timok@iki.fi>
changelog:
  - Reverted back to un-gzipped man-pages (Redhat style)
  - Added patch to compile everything cleanly
  - Some minor changes to specfile


author: Tomasz K³oczko <kloczek@rudy.mif.pg.gda.pl>
changelog:
  - new version:
      Patchlevel 17 had some minor bugfixes and improvements
      - Trailer information now put before %EOF comments if no %Trailer
      - psselect can now add blank pages.
      - Piped input works in Linux
      - spec file rewrited for using Buildroot,
      - man pages gziped.


author: Ivana Varekova <varekova@redhat.com> - 2.39-15
changelog:
  - Related: #522761
    fix some typos
  - Related: #517309
    add the description of --version and -c
  - Related: #497197
    change the description


author: Ivana Varekova <varekova@redhat.com> - 2.39-13
changelog:
  - Resolves: #443059
    add short note about /usr/bin/time x bash time confusion
  - Resolves: #452290
    add the description of the 42th parameter of /proc/[pid]/stat
  - Resolves: #456219
    fix the links to documentation
  - Resolves: #468897
    add posix manual notice to posix man-pages
  - Resolves: #471176
    add additional note to LOG_KERN in syslog(3) man-page
  - Resolves: #474238
    add pthread_setaffinity_np(3) man page
  - Resolves: #497197
    fix the description of /proc/sys/fs/file-nr file
  - Resolves: #515346
    fix typo in gai.conf(5) man-page
  - Resolves: #517309
    add --version option to zdump(8) man page
  - Resolves: #518984
    fix statfs(2) man page
  - Resolves: #522761
    fix nsswitch.conf(5) man page
  - Resolves: #524246
    fix ip(7) man page
  - Resolves: #527196
    proc(5) fix info about the restricton in /proc/sys/fs/file-max file


author: Ivana Varekova <varekova@redhat.com> - 2.39-11
changelog:
  - Resolves: #444540
    fix rint.3 man page
  - Resolves: #248405
    fix open.2 man page
  - Resolves: #450186
    add notification to malloc_hook.3
  - Resolves: #439199
    add scopev4 description to gai.conf.5
  - Resolves: #436398
    man pages imply STREAMS is implemented
  - Resolves: #402181
    improve gethostid.2 man-page
  - Resolves: #392401
    fix connect.2 man-page
  - Resolves: #357921
    update intro.2 man page, add _syscall.2 man page
  - Resolves: #449156
    update ptrace.2 man page - thanks Anoop
  - Resolves: #361611
    update proc.5 man page


author: Stepan Kasal <skasal@redhat.com> - 2.39-10
changelog:
  - fix inconsistent arg names in splice.2
  - Resolves: #232172
  - add man-pages-2.43-swapon.patch
  - Resolves: 222493
  - Remove the deprecated pciconfig_*.2 man pages.
  - Resolves: #219827
  - Add man-pages-2.39-_syscallX.patch, macros _syscall0 et al. are no longer
    available.
  - Resolves: #230554 and 235206
  - Add man-pages-2.39-rt_sigprocmask.patch
  - Resolves: #219074


author: Ivana Varekova <varekova@redhat.com> 2.39-6
changelog:
  - add getunwind.2, kexec_load.2, move_pages.2, perfmonctl.2, 
    spu_create.2, spufs.2, spu_run.2 and  vserver.2 man pages


author: Ivana Varekova <varekova@redhat.com> 2.39-4
changelog:
  - add (get/set)_robust_list.2 man pages
  - add add_key.2, keyctl.2, request_key.2 man pages 
      (removed from keyutils-libs-devel package)
  - add tux.2 man page
      (removed from tux package)


author: Ivana Varekova <varekova@redhat.com> 2.36-1
changelog:
  - add nscd_conf options (nscd_conf.patch)
  - added {create,query}_module.2, get_kernel_syms.2 man-pages 
  - added nscd, getrlimit, libaio and write patch
  - remove sigprocmask patch
  - update to 2.36


author: Ivana Varekova <varekova@redhat.com> 2.07-6
changelog:
  - man pages updated for new audit system (added missing man-pages 
  of some syscalls) (see bug 159225)


author: Jiri Ryska <jryska@redhat.com> 2.05-1
changelog:
  - update to 2.05
  - atanh(3) fix
  - issue(5) fix
  - ldd(1) fix
  - removed man1p/{compress,uncompress,renice}.1p


author: Jiri Ryska <jryska@redhat.com> 1.67-7
changelog:
  - io_setup() and io_destroy() pages now refers to header file
  - fixed types for struct shmid_ds in shmget(2) and shmctl(2)
  - fixed pages for readv(2) and writev(2)


author: Jindrich Novy <jnovy@redhat.com> 1.67-6
changelog:
  - unify fs.5 patches together to get rid of the bogus
    fs.5.orig.gz shipped among man5 pages
  - bump release to 6 to avoid conflicts with RHEL4/FC3 man-pages


author: Adrian Havill <havill@redhat.com> 1.67-2
changelog:
  - updated to latest
  - getrpcent/setrpcent typo (#73836)
  - add new resolver.5 page (#126557)
  - add SHM_HUGETLB option to shmget (#128837)


author: Adrian Havill <havill@redhat.com> 1.60-4
changelog:
  - transliterated ALL pages with latin-1 characters that would be
    displayed as either a fallback from a ascii-superset locale or
    from the POSIX locale into ascii (according to glibc transliteration
    data for locale "en"). pages with non-ascii are moved into the "en"
    locale. (#103214)


author: Adrian Havill <havill@redhat.com> 1.60-1
changelog:
  - bumped version, removed no longer needed patches
  - added #define for re_comp() and re_exec() (#79703)
  - fixed typo in Era format specifier (#80025)
  - fixed ftell info for fopen with mode "a+" (#81359)
  - fixed prototype for shmget() (#86258)
  - fixed spelling in wait.2 (#86450)
  - obsoleted _init and _fini in dlopen() (#88408)
  - fixed and merged double ext3 descriptions (#103198)
  - issue to refer to mingetty (#86248)
  - synced man page with actual ld params (#97176)


author: Ernie Petrides <petrides@redhat.com>
changelog:
  - Modify mlock.2, mlockall.2, and shmctl.2 for change to locking
    permission semantics made in kernel's linux-2.4.21-mlock.patch.


author: Trond Eivind Glomsrød <teg@redhat.com> 1.48-2
changelog:
  - Remove getipnodebyname, getipnodebyname, freehostent - they were
    only briefly part of a glibc devel version (#62646)


author: Trond Eivind Glomsrød <teg@redhat.com> 1.41-1
changelog:
  - 1.41
  - Remove bug section in llseek.2, which claimed ext2 don't support
    files bigger than 2 GB (#54569)


author: Trond Eivind Glomsrød <teg@redhat.com> 1.39-2
changelog:
  - New strptime.3, from the ftp site. Matches glibc better.
  - Fix missing .br in netdevices.7 (#53091)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Remove diff.1 - let diffutils include it instead
  - Remove capget.2 - it's included in libcap
  - Keep resolv.conf.5 - it's useful on systems without bind packages
  - Fix bootparam.7 (patch from Tim Waugh (twaugh@redhat.com)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - correct the URL for unicode in the charset manpage (#34291)
  - roff fixes
  - redo iconv patch, so we don't get a .orig from patch because of
    a two line offset


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - 1.33
  - obsolete some old, now included patches
  - remove netman-cvs, it's now older than the mainstream


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - don't delete the man pages for dlopen() and friends, 
    they are no longer part of another package
  - include man pages for ld*


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fixed bad header specification (#15364)
  - removed obsolete patches from package
  - updated the rest


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - use %{_mandir) instead of /usr/man
  - verify and fix bug in mmap man page (#7382)
  - verify and fix missing data in recvfrom man page (#1736)
  - verify and fix missing data in putw man page (#10104)
  - fixed sendfile(2) man page (#5599)
  - fixed tzset man page (#11623)


author: Tim Waugh <twaugh@redhat.com> 1.6-2
changelog:
  - New archive from Sebastian.
  - Run fmtutil in %post and %postun.
  - Require new xmltex.
  - Fix body-start().


author: PLD Team <pld-list@pld.org.pl>
changelog:
  All persons listed below can be reached at <cvs_login>@pld.org.pl

  $Log: passivetex.spec,v $
  Revision 1.8  2001/08/21 10:12:42  wrobell
  - ver. 1.6
  - stb

  Revision 1.7  2001/03/27 16:55:44  wiget
  Requires xmltex

  Revision 1.6  2001/03/27 16:53:29  wiget
  changed Source URL, updated to 1.5 version, more files in package; now passivetex is more powerfull and work ;-)

  Revision 1.5  2001/01/27 03:25:36  kloczek
  - added tetex to Prerq,
  - simplified %post, %postun.

  Revision 1.4  2001/01/27 00:08:39  klakier
  - added URL

  Revision 1.3  2001/01/27 00:07:47  klakier
  - added URL

  Revision 1.2  2001/01/24 12:41:17  klakier
  - small fixes

  Revision 1.1  2001/01/24 12:31:43  klakier
  - initial


author: Cole Robinson <crobinso@redhat.com> - 0.400.3-6.el5
changelog:
  - virt-convert: allow converting to qcow2 (bz 506927)
  - Don't fail if a storage volume was manually deleted (bz 511925)
  - virt-install: Fix --prompt and --disk interaction (bz 516129)
  - Fix virt-install --wait <= 0 (bz 512931, bz 517081)
  - Fix badly formatted error message (bz 523767)
  - Better post install error handling and reporting (bz 545837, bz 498237)
  - virt-image: Hide unimplemented --prompt option (bz 503721)
  - Default to cache=none for new qemu guests (bz 512072)


author: Cole Robinson <crobinso@redhat.com> - 0.400.3-5.el5
changelog:
  - Use ac97 as only sound model for qemu driver (bz 508747)
  - Don't throw errors with unicode using locales (bz 508784)


author: Cole Robinson <crobinso@redhat.com> - 0.400.3-2.el5
changelog:
  - Fix virt-install --disk device=floppy (bz 503053)
  - Fix virt-install --disk vol= and pool= (bz 503073)
  - Make sure detected OS is in our dictionary (bz 503092)
  - Fix PCI device assignment detach/reset calls (bz 499576)
  - Restore old --location behavior for xen HVM (bz 503473)


author: Cole Robinson <crobinso@redhat.com> - 0.300.2-12.el5
changelog:
  - Don't add spurious forward slashes in urls (bz 470891)
  - Fix FTP treeinfo false positives (bz 470888)
  - Revert fix for bz 446950, push to 5.4 (bz 470176)


author: Cole Robinson <crobinso@redhat.com> - 0.300.2-10.el5
changelog:
  - Add --wait option to virt-install (bz 306871)
  - Fix fetching newer suse kernels (bz 449129)
  - Parse treeinfo files for newer fedora trees (bz 460585)
  - Keep windows media inserted for second install stage (bz 447791)
  - Build fix so we don't fail if imports aren't present.


author: Cole Robinson <crobinso@redhat.com> - 0.300.2-9.el5
changelog:
  - Add win2008 and f9 as distro options (rhbz #442702)
  - Exit with proper error code if we receive wrong cli value (rhbz #444986)
  - Remove virt-viewer from Requires, so we don't require X (rhbz #448505)
  - Catch errors during domain lookup (rhbz #288391)
  - Correctly print help messages with unicode characters (rhbz #446950)
  - Allow installing from Scientific Linux trees (rhbz #448634)
  - Add --cpuset=auto command for numa allocation (rhbz #438554)


author: Cole Robinson <crobinso@redhat.com> - 0.300.2-6.el5
changelog:
  - Add --force option to cli utils to not prompt for input.
  - Remove check for file existence in cli utils, breaks scripts.
  - (rhbz #434786)


author: Hugh O. Brock <hbrock@redhat.com> - 0.103.0-3.el5
changelog:
  - Patch to have virtinst set up the guest without auto-reboot. Useful 
  - for testing. Thanks to Jeff Burke (bz #249708)


author: Jeremy Katz <katzj@redhat.com> - 0.99.0-1.el5
changelog:
  - support upstream pvfb config syntax (danpb, #219195)
  - don't traceback on invalid memory param (gcosta, #219270)
  - let the console come back quicker to help with HVM installs (#212024)


author: Jeremy Katz <katzj@redhat.com> - 0.96.0-1
changelog:
  - improve check for if a machine is hvm capable to catch when support isn't
    allowed by the bios (#211276)
  - cleanup after nfs mount failure on pv install (#206196)
  - support for setting vcpus (#210516)


author: Jeremy Katz <katzj@redhat.com> - 0.94.0-1
changelog:
  - Fix using block device as backing (#209138)
  - Fix error handling for invalid install locations (danpb)
  - Write out vcpu config (danpb)


author: Jeremy Katz <katzj@redhat.com> - 0.93.0-1
changelog:
  - Fix hvm network xm config (danpb)
  - Enable PAE with pae hvm hosts (danpb)
  - Fix hvm block backed cds (danpb)
  - Fix handling of block devs backed by vbds (danpb)
  - Ensure we're on a xen kernel (#205889)
  - Default to vncunused


author: Jeremy Katz <katzj@redhat.com> - 0.92.0-1
changelog:
  - Fix silly loop when asking about graphics support (misa)
  - Fix passing macaddr
  - Add support so that we reboot into the guest after installation finishes


author: Jon Masters <jcm@redhat.com> - 8.0.45-28
changelog:
  - Remove dependency on /lib/firmware in Driver Update packages. Those who
    need to ship firmware files should use an override filelist instead.
  - Resolves: #252188.


author: Jon Masters <jcm@redhat.com> - 8.0.45-26
changelog:
  - Fix kernel_module_package -v/-r macros.
  - Resolves: #252188.
  - Fix handling of zero sized JAR files.
  - Resolves: #269481.


author: Jon Masters <jcm@redhat.com> - 8.0.45-24
changelog:
  - Fix use of TMPDIR to JTMPDIR in order to avoid conflict with mktemp use.
  - Resolves: #244899.
  - Set PKG_CONFIG_PATH in %__pre_build.
  - Resolves: #251922.


author: Elliot Lee <sopwith@redhat.com> 8.0.33-1
changelog:
  - Change -D to -Wp,-D to make java happy
  - Add -D_FORTIFY_SOURCE=2 to global cflags (as per Jakub & Arjan's request)


author: Jens Petersen <petersen@redhat.com> - 8.0.26-1
changelog:
  - preserve the vendor field when VENDOR not set
  - put VENDOR in the final i386-libc line, not the tentative one


author: Jens Petersen <petersen@redhat.com> - 8.0.25-1
changelog:
  - update config.{guess,sub} to 2003-06-17
  - define VENDOR to be redhat only when /etc/redhat-release present
    [suggested by jbj]
  - put VENDOR in vendor field in our config.guess file for
    ia64, ppc, ppc64, s390, s390x, x86_64 and elf32-i386 Linux
  - drop the --host, --build, --target and --program-prefix configure options
    from %configure, since this causes far too many problems


author: Jens Petersen <petersen@redhat.com> - 8.0.22-2
changelog:
  - add config.guess and config.sub (2003-02-22) with s390 patch on config.sub
  - make %configure use them


author: Phil Knirsch <pknirsch@redhat.com> 8.0.3-2
changelog:
  - Added fix for outdated config.[sub|guess] files in 
    CFLAGS="${CFLAGS:--O2}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu \
  	--target=noarch-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib64 \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info section


author: Alexander Larsson <alexl@redhat.com> 8.0.1
changelog:
  - Add debug package support to 
      
      
      
      /usr/lib/rpm/redhat/brp-compress 
      /usr/lib/rpm/redhat/brp-strip /usr/bin/strip 
      /usr/lib/rpm/redhat/brp-strip-static-archive /usr/bin/strip 
      /usr/lib/rpm/redhat/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump 
      /usr/lib/rpm/brp-python-bytecompile 
      /usr/lib/rpm/redhat/brp-java-repack-jars


author: Jens Petersen <petersen@redhat.com> 7.3.92-4
changelog:
  - fix %configure targeting for autoconf-2.5x (#58468)
  - include ~/.rpmmacros in macrofiles file path again


author: Tim Waugh <twaugh@redhat.com> 1.2.2-1
changelog:
  - s/Copyright/License/.
  - 1.2.2.
  - Apply multibyte patch so that DTD preparsing works with DocBook 4.0 up.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - don't try to touch the site-start.el file
  - use %{_tmppath}
  - don't %define %version above the "Version: " part
    of the header


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - PATH hack to protect "make install" from install-info
  - %doc path fixed
  - protect postun from uninstall
  - Moved $V outside of '' so that it gets interpolated


author: Ray Strode <rstrode@redhat.com> - 0.10-6
changelog:
  - call update-desktop-database in %preun (bug 180898)
  - don't fail if update-desktop-database fails
  - don't use %makeinstall


author: Ray Strode <rstrode@redhat.com> 0.8-5
changelog:
  - Swap if and else in egg_desktop_entries_get_locale_country
    to prevent allocating massive amounts of unneeded ram.


author: Dan Williams <dcbw@redhat.com> 0.4-2
changelog:
  - Fix RH #117201, initial comment fails validation
  - Add in, but do not use, Frederic Crozat's freedesktop.org
      menu-spec 0.8 patch


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 0.2.92 cvs snap with --remove-key and checking for OnlyShowIn
    and missing trailing semicolons on string lists


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-dmc to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Than Ngo <than@redhat.com> 3.2.4-14
changelog:
  - fix #191825, buildrequire on imake
  - fix #173748, fig2dev still refers to /usr/X11R6/lib/X11/rgb.txt


author: Miloslav Trmac <mitr@redhat.com> - 1:3.2.4-8
changelog:
  - Fix at least a few obvious instances of C abuse (partly #74594 with patch by
    Sysoltsev Slawa)
  - Drop -Dcfree=free fix, not needed with current version


author: Karel Zak <kzak@redhat.com> 1.3-20
changelog:
  - #164950 - call account management and credential reinitialization functions
    (patch by Nalin Dahyabhai)


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Moved to new pam conventions.
  - Use pam according to spec, rather than abusing it as before.
  - Updated to version 1.1.
  - BuildRoot


author: Matthias Saou <http://freshrpms.net/> 0.2-2
changelog:
  - Major spec file cleanup. (#155731)
  - Use %find_lang macro.
  - Add missing sysfsutils-devel build requirement.


author: Marcela Mašláňová <mmaslano@redhat.com> - 2.6.18-10
changelog:
  - “ip maddr show” on an infiniband address causes a stack corruption 
   because the length of the address for Infiniband
  - Resolves: rhbz#472878


author: Marcela Maslanova <mmaslano@redhat.com> - 2.6.18-8
changelog:
  - change ss.c - use standart library
  - fix segfault - only hexadecimal keys are possible values for xfrm
  - support for TCP_RTO_MIN
  - update of man ip - xfrm details
  - IPv6 Default Address Selection - User Configurable Policy Table
  - Resolves: rhbz#446198, rhbz#449933, rhbz#358351, rhbz#431011, rhbz#439524


author: Marcela Maslanova <mmaslano@redhat.com> - 2.6.18-7
changelog:
  - [iPv6DoD] fix RFC 4309 Using AES CCM Mode with IPsec ESP
  - change xfrm.h header according to ibm patch
  - Resolves: #441384


author: Radek Vokal <rvokal@redhat.com> - 2.6.18-1
changelog:
  - upgrade to upstream 2.6.18
  - initcwnd patch merged
  - bug fix for xfrm monitor
  - alignment fixes for cris
  - documentation corrections


author: Phil Knirsch <pknirsch@redhat.com> 2.4.7-14
changelog:
  - Fixed -f option for ss (#118355).
  - Small description fix (#110997).
  - Added initialization of some vars (#74961). 
  - Added patch to initialize "default" rule as well (#60693).


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Updated to latest version. Used by other distros, so seems stable. ;-)
  - Quite a few patches needed updating in that turn.
  - Added ss (#107363) and several other new nifty tools.


author: Phil Knirsch <pknirsch@redhat.com> 2.4.7-3
changelog:
  - Fixed missing diffserv and atm support in config (#57278).
  - Fixed inconsistent numeric base problem for command line (#65473).


author: Helge Deller <hdeller@redhat.de>
changelog:
  - updated to iproute2-2.2.4-now-ss001007.tar.gz 
  - bzip2 source tar file
  - "License" replaces "Copyright"
  - added "BuildPrereq: tetex-latex tetex-dvips psutils"
  - rebuilt for 7.2


author: Jiri Skala <jskala@redhat.com> - 0.17-34
changelog:
  - Resolves: #315251: patched socket leaking when fails opening a file 
  - Resolves: #442712: patched mget bug when filenames are case sensitivly corrupted


author: Petr Raszyk <praszyk@redhat.com> - 0.17-31
changelog:
  - ftp does not close socket descriptor (if the remote file
    does not exist).
    See #174599, netkit-ftp-0.17-data.patch


author: Petr Raszyk <praszyk@redhat.com> - 0.17-30
changelog:
  - The patch netkit-ftp-0.17-C-Frame121.patch adds some
    comments/hints for C-Frame 121. It can be removed any time.


author: Petr Raszyk <praszyk@redhat.com> - 0.17-28
changelog:
  - This 'hack' will avoid a bug in ftp-server
    (  < vsftpd-2.0.1-5   ). See #165083 (server prints the 
    '150 FILE:...' line twice).
    This patch can be (later ?) removed.


author: Alan Cox <alan@redhat.com>
changelog:
  - Re-arranged some totally bogus old bezerkly code that could
    segfault ftp on connection loss. (BZ #122295)


author: Philipp Knirsch <pknirsch@redhat.com>
changelog:
  - Switched the default transfer protocol from PORT to PASV as proposed on
    bugzilla (#16134)
  - Fixed a small compiler warning in ftp.c line 886


author: Mike A. Harris <mharris@redhat.com> 1.8.6.4-1
changelog:
  - Updated xorg-x11-drv-s3virge to version 1.8.6.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.8.6-0
changelog:
  - Initial spec file for s3virge video driver generated automatically
    by my xorg-driverspecgen script.


author: Milan Crha <mcrha@redhat.com> - 2.12.3-11.el5
changelog:
  - Require latest evolution-data-server package (1.12.3-17).
  - Require latest evolution package (2.12.3-19).


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.2-2
changelog:
  - Add BuildRequires for gtk-doc (closes #192251).
  - Require specific versions of GNU Autotools packages for building.
  - Various spec file cleanups.


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.2-1
changelog:
  - Update to 2.7.2
  - Update spec file to run the autotools itself after patching.
  - Remove evolution-exchange-2.7.1-fix_version.patch; fixed upstream.
  - Remove unused or obsolete patches:
    evolution-connector-2.0.2-domain-fix.patch
    evolution-connector-2.7.2-generated-autotool.patch
    ximian-connector-2.1.4-fix-convenience-libraries.patch
    ximian-connector-2.2.2-install-debug-utilities.patch
    ximian-connector-2.2.2-noinst-ltlibraries.patch
  - Add evolution-exchange-2.7.2-no_gnome_common.patch; removes
    GNOME_COMPILE_WARNINGS from configure.in.


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.1-1
changelog:
  - Update to 2.7.1
  - Add some comments about the `plibdir' variable.
  - Add --enable-gtk-doc to the `configure' invocation.
  - Add temporary patch evolution-exchange-2.7.1-fix_version.patch.


author: David Malcolm <dmalcolm@redhat.com> - 2.5.3-1
changelog:
  - 2.5.3
  - regenerate patch 200
  - add patch to use correct marshalling code (patch 300)
  - dropped glob of etspec files


author: David Malcolm <dmalcolm@redhat.com> - 2.5.2-1
changelog:
  - 2.5.2
  - bump evo_major from 2.4 to 2.6
  - bump evolution requirement from 2.4.1 to 2.5.2 to ensure we get an appropriate
    underlying version of evolution
  - regenerate patch 200


author: David Malcolm <dmalcolm@redhat.com> - 2.4.2-1
changelog:
  - 2.4.2
  - regenerate patch 200; forcing regeneration of intltool scripts to 
    keep them in sync with our aclocal/intltool.m4


author: David Malcolm <dmalcolm@redhat.com> - 2.4.1-1
changelog:
  - 2.4.1
  - bump evolution requirement to 2.4.1 and libsoup requirement to 2.2.6.1
  - fix URL to point to 2.4, not 2.3


author: David Malcolm <dmalcolm@redhat.com> - 2.3.8-1
changelog:
  - 2.3.8
  - Regenerated patch 200
  - Add -Werror-implicit-function-declaration to CFLAGS; make it use RPM_OPT_FLAGS


author: David Malcolm <dmalcolm@redhat.com> - 2.3.7-1
changelog:
  - 2.3.7
  - Bump evolution requirement from 2.3.5.1 to 2.3.7
  - Bump libsoup requirement from 2.2.2 to 2.2.5
  - Remove ximian-connector-2.0.4-fix-sync-callback.patch; a slightly modified 
    version of this is now in the upstream tarball (#139393)


author: David Malcolm <dmalcolm@redhat.com> - 2.3.6-2
changelog:
  - bump evo_major from 2.2 to 2.4
  - Removed the various test programs (they no longer exist in the upstream 
    tarball)
  - Renamed more instances of "ximian-connector" to "evolution-exchange" as
    appropriate.


author: David Malcolm <dmalcolm@redhat.com> - 2.3.5-1
changelog:
  - 2.3.5
  - Changed various references to source tarball name from ximian-connector to
    evolution-exchange and updated the URL
  - Remove Patch101 and Patch102 from autotool source patches and regenerate 
    resulting post-autotool patch


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-4
changelog:
  - Install the debug utilities from the "lib" subdirectory; renumber patches 
    accordingly; regenerate the generated patch


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-3
changelog:
  - updated noinst patch: libexchange is now a convenience library again; use -R
  syntax to express path to Evolution's private libraries rather than -Wl since
  libtool cannot properly intrepret the latter; regenerated resulting patch.


author: David Malcolm <dmalcolm@redhat.com> - 2.1.6-1
changelog:
  - Update from unstable upstream 2.1.5 to 2.1.6
  - Require evolution 2.1.6
  - Removed patches for convenience libraries as these are now upstream


author: David Malcolm <dmalcolm@redhat.com> - 2.1.4-3
changelog:
  - Patch to fix non-portable usage of convenience libraries; reorganised the hand-edited vs generated patches (generated patch is 990K in size)
  - Add "-Wl" to make arguments to escape usage of -rpath so it is seen by linker, but not by libtool,
  enabling libexchange.la to install below /usr/lib/evolution-data-server-1.2/camel-providers, rather
  than /usr/lib/evolution/2.2


author: David Malcolm <dmalcolm@redhat.com> - 2.1.4-2
changelog:
  - Split out the 64-bit acinclude.m4 patch into two patches, one containing the "actual" patch; the other containing all of the regenerated autotool results.
  - Actually apply the 64-bit acinclude.m4 fix this time.


author: David Malcolm <dmalcolm@redhat.com> - 2.1.4-1
changelog:
  - Update from stable upstream 2.0.3 to unstable upstream 2.1.4
  - Update evo_major from 2.0 to 2.2
  - Added eds_major definition
  - Require evolution 2.1.4
  - Require libsoup 2.2.2
  - Re-enable s390 architectures
  - Cope with camel-providers now being stored below evolution-data-server, rather than evolution.
  - Remove .a files from camel-providers subdir
  - Removed various docs no longer present


author: David Malcolm <dmalcolm@redhat.com> - 2.0.3-1
changelog:
  - Update from upstream 2.0.2 to 2.0.3
  - The fix for bugs #139134 and #141419 is now in the upstream tarball; removing the patch


author: David Malcolm <dmalcolm@redhat.com> - 2.0.2-1
changelog:
  - Update from 2.0.1 to 2.0.2
  - exclude s390/s390x architecture for now due to Mozilla build problems
  - refresh the autogenerated parts of the 64bit fix patch to patch over the latest version of autogenerated files from upstream


author: David Malcolm <dmalcolm@redhat.com> - 2.0.1-1
changelog:
  - update from 2.0.0 to 2.0.1
  - update required version of evolution from 1.5.94.1 to 2.0.1
  - refresh the autogenerated parts of the 64bit fix patch to patch over the latest version of autogenerated files from upstream


author: David Malcolm <dmalcolm@redhat.com> - 1.5.94.1-1
changelog:
  - update tarball and evolution-version from 1.5.93 to 1.5.94.1
  - convert various occurrences of "1.5" in paths to "2.0" to reflect reorganisations of evolution and the connector
  - refresh the autogenerated parts of the 64bit fix patch to patch over the latest version of autogenerated files from upstream


author: David Malcolm <dmalcolm@redhat.com> - 1.5.93-1
changelog:
  - updated from 1.5.92 to 1.5.93
  - removed patch to compile against Evolution 1.5.93 (no longer needed; also was causing bug #130840)
  - removed patch for LDAP detection
  - added a patch to acinclude.m4 and configure.in to detect and use correct library paths (together with patching the files generated by autotools)


author: Nalin Dahyabhai <nalin@redhat.com> 1.5.92-1
changelog:
  - Require a version of openldap-devel which provides evolution-specific libs.
  - Use the evolution-specific static libraries from openldap-devel, taking into
    account the value of gcc's multidir setting.
  - Set $LIBS before running configure so that libldap's dependencies get pulled
    in and we don't accidentally link against the system-wide copy, which would
    make all of this hoop jumping pointless.
  - Tag translation files as language-specific using %{find_lang}.
  - Update to 1.5.92.
  - Patch to compile against Evolution 1.5.93.


author: David Malcolm <dmalcolm@redhat.com> - 1.5.9-1
changelog:
  - 1.5.9 - first version for the 1.5.* series of Evolution: use revised LDAP detection, fix a build problem in migr-test, use -rpath with evolution 1.5's privlibdir


author: John (J5) Palmieri <johnp@redhat.com> - 1.0.0-2
changelog:
  - Add requirements on gnome-mag and newer version of control-center
  - remove .desktop file and make control-center start and configure orca


author: Mike Christie <mchristie@redhat.com> - 6.2.0.871-0.16
changelog:
  - 570893 Fix bnx2x uip panic due to the packet index in the VLAN field of the
  BD does not match the packet index expected by the firmware when the index crosses a BD page.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.871-0.13
changelog:
  - 517380 Update Broadcom iSCSI userspace components.
  - 504666 When using iscsi ifaces with different initiator names only the default name is used for discovery.
  - 514926 iSCSI does not reconnect after ifdown and ifup.
  - 511271 Do not run chkconfig on net scripts on startup.
  - 531748 Fix typo in iscsiadm session print out where REOPEN was mispelled
  as REPOEN.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.871-0.11
changelog:
  - 514926 Sync brcm uio to 0.4.8 to fix ifdown reconnection handling
  - 520508 Fix login/connect timeout due to MAC addr mishandling.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.871-0.8
changelog:
  - 508782 fix iscsid/iscsistart segfault due to bad conn context cast
  - Fix bnx2i login when iface uses only the hwaddress.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.871-0.7
changelog:
  - 505958 load bnx2i and cxgb3i drivers
  - 481807 Fix ownership of /etc/iscsi dir
  - Fix leak in iscsid when setting iscsi wq thread nice/priority.
  - 442418 Add Broadcom bnx2i userspace support.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.871-0.2
changelog:
  - 249049 create debug rpms by removing -s from the install command
  - 499565 Install libfwparam.a and headers for anaconda


author: Mike Christie <mchristie@redhat.com> - 6.2.0.868-0.18
changelog:
  - 476752 Must install list.h (install as iscsi_list.h) because fw_context.h
  is bringing it in. Also revert ibft name changes because anaconda is using
  them instead of the fw_context.h functions.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.868-0.17
changelog:
  - 472562 (additional fixup to patch) only use logout time2wait for
  relogins when response code is 2 or 3.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.868-0.9
changelog:
  - Related to 445721 - Install fw helpers as lib so first stage of
  installer can easily use it. This is a temp lib, and is not a stable
  interface. For now, just for install, we are adding this library.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.868-0.8
changelog:
  - Related to 445721 - when using intel nics some network values are
  not set, so iscsiadm would fail instead of just printing what we got.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.868-0.5
changelog:
  - 438092 Print ibft net info (waiting on ppc support from IBM).
  - 437195 Use CHAP values from sysfs during resync, incase they were from ibft.
  - 437195 Update README to reflect that users should set node.startup


author: Mike Christie <mchristie@redhat.com> - 6.2.0.865-0.7
changelog:
  - 250140 Document how to set timers when using multipath or iscsi root.
  - 249053 Document iscsid and iscsiadm debug argument.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.865-0.2
changelog:
  - 244987 old tools used to make the root db dir for apps and anaconda relied
  on that. This is a regression from 227554.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.865-0.1
changelog:
  - Bring in fixes that got merged in git but did not make the 865 release and
  code that partners need to test due to lack of hw limitations.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.865-0.0
changelog:
  - Rebase to upstream to bring in bug and security fixes.
  - 243727 CVE-2007-3099 CVE-2007-3100
  - 227554 Support only passing in a target with iscsiadm commands.
  - 227698 ipv6 fixups


author: Mike Christie <mchristie@redhat.com> - 6.2.0.742-0.6
changelog:
  -  Patch for 218841 was not getting applied because 'BZ' in the patch
  caused rpm to try and bunzip it instead of apply it.
  - 227815 update docs to make it more clear what is node mode.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.742-0.5
changelog:
  - BZ 218791 - We get a network hang when the firewall is started
  - and to allow iscsi root boot to work we start iscsid early.
  - This breaks up iscsi.init into iscsidevs.init (start iscsi targets)
  - and iscsid.init (start iscsi daemon). Users should be using
  - iscsiadm for management instead of the rc script, but we add some compat
  - code to make it a little easier.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.730-0.0
changelog:
  - BZ 212263 - load iser
  - Rebase to upstream open-iscsi-2.0-730 to bring in fixes we were
  - managing but are now upstream and bring in fixes I had done upstream
  - for other partner/distro testing.


author: Mike Christie <mchristie@redhat.com> - 6.2.0.695-0.7
changelog:
  - BZ 210470 update man pages for file moves
  - Fix targetname strcmp
  - read default config before doing discovery


author: Mike Christie <mchristie@redhat.com> - 6.2.0.695-0.6
changelog:
  - BZ 209523 make sure the network is not going to get shutdown so
  iscsi devices (include iscsi root and dm/md over iscsi) get syncd.
  - BZ 209415 have package create iscsi var dirs


author: Mike Christie <mchristie@redhat.com> - 6.2.0.695-0.2
changelog:
  - BZ 208050 - change default initiator name to reflect redhat
  - Move pid from /etc/iscsi to /var/run/iscsid.pid


author: Mike Christie <mchristie@redhat.com> - 6.2.0.695-0.1
changelog:
  - Add compat with FC kernel so iscsid will pass startup checks and run.
  - Fix bug when using hw iscsi and software iscsi and iscsid is restarted.
  - Fix session matching bug when hw and software iscsi is both running


author: Mike Christie <mchristie@redhat.com> - 6.1.1.685
changelog:
  - Rebase to upstream to bring in many bug fixes and rm db.
  - iscsi uses /etc/iscsi instead of just etc now


author: Mike Christie <mchristie@redhat.com> - 6.1.1.645
changelog:
  - update to upstream 1.1.645
  - Note DB and interface changed so you must update kernel, tools and DB


author: Mike Christie <mchristi@redhat.com> - 6.0.5.595-2
changelog:
  - add PatM's statics.c file. This is needed for boot since 
    there is no getpwuid static available at that time.


author: Jeremy Katz <katzj@redhat.com> - 6.0.5.595-1
changelog:
  - ensure that we respect %{optflags}
  - cleaned up initscript to make use of standard functions, return right 
    values and start by default
  - build iscsistart as a static binary for use in initrds


author: Mike Christie <mchristi@redhat.com>
changelog:
  - rebase package to svn rev 595 to fix several bugs
    NOTE!!!!!!!! This is not compatible with the older open-iscsi modules
    and tools. You must upgrade.


author: Mike Christie <mchristi@redhat.com>
changelog:
  - update package to open-iscsi svn rev 571
    NOTE!!!!!!!! This is not compatible with the older open-iscsi modules
    and tools. You must upgrade.


author: Mike Christie <mchristi@redhat.com>
changelog:
  - From Andy Henson <andy@zexia.co.uk>:
    Autogenerate /etc/initiatorname.iscsi during install if not already present
  - Remove code to autogenerate /etc/initiatorname.iscsi from initscript
  - From dan.y.roche@gmail.com:
    add touch and rm lock code
  - update README
  - update default iscsid.conf. "cnx" was not supported. The correct
    id was "conn".


author: Mike Christie <mchristi@redhat.com>
changelog:
  - rebase package to bring in ppc64 unsigned long vs unsigned
    long long fix and iscsadm return value fix. Also drop rdma patch
    becuase it is now upstream.


author: Donnie Barnes <djb@redhat.com>
changelog:
  - ALRIGHT!  Woo-hoo!  Erik already did the install-info stuff!
  - added BuildRoot
  - spec file cleanups


author: Phil Knirsch <pknirsch@redhat.com> - 1.0.4-4
changelog:
  - Made a better fix for the powerdown button which checks if g-p-m is running
  - Don't install sample.conf anymore, not needed


author: Phil Knirsch <pknirsch@redhat.com> - 1.0.4-3
changelog:
  - Disable the automatic shutdown -h via powerdown button by default due to
    conflicts with gnome-power-manager


author: Miloslav Trmac <mitr@redhat.com> - 1.0.3-2
changelog:
  - Update to 1.0.3 (fixes #128834)
  - s/Copyright/License/
  - Add logrotate config file (#110677, from Michal Jaegermann)
  - Don't verify contents of /var/log/acpid (#125862)
  - Use $RPM_OPT_FLAGS
  - Fix and cleanup acpid-1.0.1-pm1.patch
  - Add condrestart to %postun


author: Tim Hockin <thockin@sun.com>
changelog:
  - Updated RPM spec with patch from sun for chkconfig on/off
    - Add Changelog, make 'make rpm' use it.


author: Tim Hockin <thockin@sun.com>
changelog:
  - Fixed logging bug - not appending to log (O_APPEND needed)
    - Fix 'make install' to not need root access
    - Fix RPM spec to not need root


author: Mike A. Harris <mharris@redhat.com> 7.1-1
changelog:
  - Bump package version to 7.1 to reflect the X11 release the utilities
    are aggregated from.
  - Updated to xdriinfo-1.0.1, xev-1.0.2, xwininfo-1.0.2 from X11R7.1


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Updated all tarballs to version 1.0.0 from X11R7 RC4.
  - Changed manpage dir from man1x to man1 to match upstream RC4 default.
  - Moved all app-defaults files from _libdir to _datadir


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-summa to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for summa input driver generated automatically
    by my xorg-driverspecgen script.


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-hyperpen to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for hyperpen input driver generated automatically
    by my xorg-driverspecgen script.


author: Karsten Hopp <karsten@redhat.com> - 4.1.10-2.fc6
changelog:
  - buildrequire intltool which was previously pulled in by scrollkeeper but
    dropped this requirement because of bz #203606


author: Ryan McCabe <rmccabe@redhat.com> 1.0.57-3
changelog:
  - Fix Red Hat bugzilla tickets: 352631 436939 474155 476260 488957 491798 515443 517140 520866 530171


author: Jim Parsons <jparsons@redhat.com> 1.0.21-1
changelog:
  -  Some gui fixups, support for file system IDs, and some exposure of a few additional rgmanager params


author: Stanko Kupcevic <kupcevic@redhat.com> 1.0.13-1
changelog:
  -  Fixes for bz161344, 160264, 160127, 163673, 163237, 160240, 164407, 159965, 165130, 165140, 161974, 165169, 164936, 165184, 164857, 166663, 166140, and validation of IP addresses.


author: Jim Parsons <jparsons@redhat.com> 0.9.17-1
changelog:
  - Fixes for bz149123, 149885, 149660, 149508, 149488, 149897,
      150895, 150813, 149124, 149662, 149128, 149508, 149545, 149707


author: Jim Parsons <jparsons@redhat.com> 0.9.12-1
changelog:
  - Fixes for bz149897, 149123, 149124, 149674, 149676, 149761, 149269, 149670.
      Also added in Service Creation dialog panel.


author: Jim Parsons <jparsons@redhat.com> 0.9.5-1
changelog:
  - Many fixes and completions. Added check boxes for restricted
      and ordered failover domains. Added properties for fences.
      Fixed bug in fence devices section. Added support for GULM
      in UI.


author: Jiri Skala <jskala@redhat.com> - 3.7.11-2
changelog:
  - Resolves: #504591 - Problems with spaces in file names over HTTP
  - Resolves: #504594 - Alias ''edit' has multiple flaws


author: Jiri Skala <jskala@redhat.com> - 3.7.11-1
changelog:
  - Resolves: #468858 - Clean up lftp source code - corrected licensing
  - Resolves: #458777 - License conflict between OpenSSL and GNU GPL v2 licenses in lftp
  - Resolves: #461922 - lftp 'help mirror' does not display all options defined in manpage
  - Resolves: #308721 - re-base to latest upstream 3.7.11


author: Jiri Skala <jskala@redhat.com> - 3.7.3-1
changelog:
  - Resolves: #308721 rebase to latest upstream
  - Resolves: #239334 solves CVE-2007-2348
  - Resolves: #422881 fixes bug with -c options
  - Resolves: #434294 fixes bug in (m)put with usage -c option


author: Jason Vas Dias<jvdias@redhat.com> - 3.3.5-4
changelog:
  - fix bug 176315: openssl libraries not being picked up - gnutls was instead
  - improvements to bug 172376 fix


author: Jason Vas Dias<jvdias@redhat.com> - 3.3.5-1
changelog:
  - Upgrade to version 3.3.5
  - fix bug bz172376 : host lookups should use any address found after timeout


author: Jason Vas Dias <jvdias@redhat.com> - 3.3.2-1
changelog:
  - *** PLEASE COULD ANYONE MODIFYING lftp TEST IT BEFORE SUBMITTING! ***
    (and preferably contact the lftp package maintainer (me) first - thank you!)
    bug 171096 : 'mget files in lftp causes abort' (core dump actually)
    resulted from not doing so .
    See http://lftp.yar.ru :
        Recent events:
        2005-10-17: lftp-3.3.2 released. Fixed a coredump caused by double-free.


author: Nalin Dahyabhai <nalin@redhat.com> 2.6.10-3
changelog:
  - add patch to avoid DoS when connecting to HTTP servers (or "HTTP" "servers")
    which don't provide status headers, or provide empty lines instead of status
    headers


author: Nalin Dahyabhai <nalin@redhat.com> 2.6.10-1
changelog:
  - update to 2.6.10, which folds in the previous patches
  - configure with --with-debug so that we get useful debug info


author: Nalin Dahyabhai <nalin@redhat.com> 2.6.9-1
changelog:
  - include patch based on patch from Ulf Härnhammar to fix unsafe use of
    sscanf when reading http directory listings (CAN-2003-0963)
  - include patch based on patch from Ulf Härnhammar to fix compile warnings
    modified based on input from Solar Designer


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - explicitly list the modules which are built when the package compiles, so
    that module build failures (for whatever reason) get caught


author: Tim Powers <timp@redhat.com>
changelog:
  - patched to build with gcc-2.96
  - use gcc instead of c++ for CXX, otherwise you expose an ICE in gcc when
    using g++ on two files, one being a C++ source, and the other a C source.
    Using gcc does the correct thing.


author: Jeremy Katz <katzj@redhat.com> - 0.181-1
changelog:
  - Clean up spacing and use current widgets for exception dialog
  - add serbian keyboard models (#175611)


author: Jeremy Katz <katzj@redhat.com> - 0.171-1
changelog:
  - tweaks for new kudzu X driver model
  - Move some of the anaconda X startup handling to rhpl for use in 
    firstboot (clumens)


author: Chris Lumens <clumens@redhat.com> 0.163-1
changelog:
  - Change resolution sorting to match X's behavior (Jef Spaleta, #157596).
  - Don't pad IP address information with unnecessary zeros (#157657).


author: Jeremy Katz <katzj@redhat.com> - 0.161-1
changelog:
  - Only default to fbdev X server on ppc64pseries, not all ppc (#149188)
  - Set UseFBDev on ppc boxes using ati video cards (#149188)


author: Peter Jones <pjones@redhat.com> - 0.157-1
changelog:
  - get rid of "constructors" in favor of a Unit class and "units",
    which works like the old constructors.
  - rework storage.Size.__str__ to be much cleaner
  - make clamp/unclamp/shrink return self.


author: Peter Jones <pjones@redhat.com> - 0.154-1
changelog:
  - add descriptors.py, implementing SimpleBoolDescriptor, BoolDescriptor,
    and TristateDescriptor classes.
  - added storage.py, implementing a Size class useful for representing
    the size of disks or ram, and several utility functions such as Bytes(),
    KiloBytes, MegaBytes(), etc., which act as constructors.
  - added genModule.py, which generates python modules on the fly, so
    you don't need to make a directory, __init__.py, etc just to
    do "from foo.bar import baz"


author: Jeremy Katz <katzj@redhat.com> - 0.151-1
changelog:
  - add patch from Jim Parsons to add executil.execWithCaptureErrorStatus as 
    needed by system-config-lvm


author: Harald Hoyer <harald@redhat.com> - 0.147-1
changelog:
  - let Conf.ConfModules use modprobe.conf name and format (bug 131952)
  - use network script resolv.conf merger/changer (bug 132485)


author: Jeremy Katz <katzj@redhat.com> - 0.139-1
changelog:
  - videocard.py: fixups for VESA handling on x86_64
  - videocard.py, xserver.py: XFree86 -> Xorg changes


author: Brent Fox <bfox@redhat.com> 0.129-1
changelog:
  - enable DRI extentions for all i386, x86_64, and ia64 systems (bug #115672)
  - vmware doesn't do 24bpp (#117375)
  - fix for savage + lcds (#117079)


author: Jeremy Katz <katzj@redhat.com> 0.108-1
changelog:
  - comps.py: preserve xml doc/nodes
  - translate.py: make it so we can use translations from update disks in 
    anaconda


author: Harald Hoyer <harald@redhat.de> 0.101.1-1
changelog:
  - strip quotes from PAP/CHAP server also
  - Conf.py, cope with lines at the end of the file, that have no newline
  - speedup some things


author: Jeremy Katz <katzj@redhat.com> 0.93-1
changelog:
  - mouse.py (mouseWindow): try to ensure we have a locale that 
    we can do linedrawing chars for (#84908)


author: Brent Fox <bfox@redhat.com> 0.87-1
changelog:
  - load additional us keymap for all ru keyboards in keyboard_models.py
  - make sure the kbd option gets set in keyboard.py


author: Brent Fox <bfox@redhat.com> 0.84-1
changelog:
  - if there are no display Modes in the XF86Config file, create one and default to 800x600 (bug #83314)


author: Brent Fox <bfox@redhat.com> 0.79-1
changelog:
  - add us keymap and XkbOptions to non-latin keymaps in keyboard_models.py
  - change keyboard.py to handle the XkbOptions field


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - translate.py: if we fail, at least gracefully fall back instead of 
    causing a traceback (#76104)


author: Jeremy Katz <katzj@redhat.com> 0.69-1
changelog:
  - only probe for the mouse once to fix mouse probing problems
  - make keyboard names more consistent (#79354)


author: Jeremy Katz <katzj@redhat.com> 0.59-1
changelog:
  - access Cards database in /usr/share/hwdata instead of 
    /usr/X11R6/lib/X11 (#73899)
  - excludearch x86_64 until python is fixed


author: Jeremy Katz <katzj@redhat.com> 0.36-1
changelog:
  - add generic wheel mouse types
  - add bad hack to handle packages which should only be installed 
    if another package is installed


author: Jeremy Katz <katzj@redhat.com> 0.27-1
changelog:
  - diskutil.py, diskutil.c: add some simple disk utility methods (mount, 
    umount, sync, ejectCdrom)


author: Brent Fox <bfox@redhat.com> 0.9-2
changelog:
  - Provide a way to pass keymap name back to firstboot
  - Fix error in Slovakian keymap line in keyboard_models.py


author: Karsten Hopp <karsten@redhat.de> 3.0.3-9
changelog:
  - fix invalid javascript created by quote unaware match in default.filter
    Anduin Withers (#126366)


author: Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
changelog:
  + privoxy-2.9.15-7
  - Changing sed expression that removed CR from the end of the lines. This
    new one removes any control caracter, and should work with older versions
    of sed


author: Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
changelog:
  + privoxy-2.9.15-4
  - Fixing issues created by specfile sync between branches
    - Correcting the release number (WARNING)
    - Reintroducing text file conversion (dos -> unix)
    - Reconverting hardcoded directories to macros
    - Refixing ownership of privoxy files (now using multiple defattr
      definitions)


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - fix several .spec file issues to shut up rpmlint
    - non-standard-dir-perm /var/log/privoxy 0744
    - invalid-vendor Privoxy.Org (This is ok for binaries compiled by privoxy
      members, but not for packages from Red Hat)
    - non-standard-group Networking/Utilities
    - logrotate and init scripts should be noreplace


author: Hal Burgiss <hal@foobox.net>
changelog:
  + privoxy-2.9.15-1
  - Add another template and alphabetize these for easier tracking.
  - Add doc/images directory.


author: Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
changelog:
  + privoxy-2.9.15-1
  - Version bump
  - Adding noreplace for %{privoxyconf}/config
  - Included a method to verify if the versions declared on the specfile and
    configure.in match. Interrupt the build if they don't.


author: Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
changelog:
  + privoxy-2.9.14-2
  - Removed the redhat hack that prevented the user and group from
    being dealocated. That was a misundestanding of my part regarding
    redhat policy.


author: Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
changelog:
  + privoxy-2.9.14-1
  - Changes to fixate the uid and gid values as (both) 73. This is a 
    value we hope to standarize for all distributions. RedHat already
    uses it, and Conectiva should start as soon as I find where the heck
    I left my cluebat :-)
  - Only remove the user and group on uninstall if this is not redhat, once
    redhat likes to have the values allocated even if the package is not 
    installed


author: Hal Burgiss <hal@foobox.net>
changelog:
  + privoxy-2.9.13-4
  - Add templates/cgi-style.css, faq.txt, p_web.css, LICENSE
  - Remove templates/blocked-compact.
  - Add more docbook stuff to Builderquires.


author: Rodrigo Barbosa <rodrigob@suespammers.org>
changelog:
  + privoxy-2.9.13-2
  - Fixed the init files entries. Now we use %ghost
  - improved username (and groupname) handling on the %pre section. By improved
    I mean: we do it by brute force now. Much easier to maintain. Yeah, you
    got it right. No more Mr. Nice Guy.
  - Removed the userdel call on %post. No need, once it's complety handled on
    the %pre section


author: Hal Burgiss <hal@foobox.net>
changelog:
  + junkbusterng-2.9.13-1
  - Fixed build problems re: name conflicts with man page and logrotate.
  - Commented out rc?d/* configs for time being, which are causing a build 
  - failure. /etc/junkbuster is now /etc/privoxy. Stefan did other name 
  - changes. Fixed typo ';' should be ':' causing 'rpm -e' to fail.


author: Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
changelog:
  + junkbusterng-2.9.13-1
  - References to the expression ijb where changed where possible
  - New package name: junkbusterng (all in lower case, acording to
    the LSB recomendation)
  - Version changed to: 2.9.13
  - Release: 1
  - Added: junkbuster to obsoletes and conflicts (Not sure this is
    right. If it obsoletes, why conflict ? Have to check it later)
  - Summary changed: Stefan, please check and aprove it
  - Changes description to use the new name
  - Sed string was NOT changed. Have to wait to the manpage to
    change first
  - Keeping the user junkbuster for now. It will require some aditional
    changes on the script (scheduled for the next specfile release)
  - Added post entry to move the old logfile to the new log directory
  - Removing "chkconfig --add" entry (not good to have it automaticaly
    added to the startup list).
  - Added preun section to stop the service with the old name, as well
    as remove it from the startup list
  - Removed the chkconfig --del entry from the conditional block on
    the preun scriptlet (now handled on the %files section)


author: Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
changelog:
  + junkbuster-2.9.11-6
  - Changed the routined that handle the junkbust and junkbuster users on
    %pre and %post to work in a smoother manner
  - %files now uses hardcoded usernames, to avoid problems with package
    name changes in the future


author: Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
changelog:
  + junkbuster-2.9.11-5
  - Added "make redhat-dok" to the build process
  - Added docbook-utils to BuildRequires


author: Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
changelog:
  + junkbuster-2.9.11-4
  - Changing man section in the manpage from 1 to 8
  - We now require packages, not files, to avoid issues with apt


author: Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
changelog:
  + junkbuster-2.9.11-2
  - General specfile fixup, using the best recomended practices, including:
  	- Adding -q to %setup
  	- Using macros whereever possible
  	- Not using wildchars on %files section
  	- Doubling the percentage char on changelog and comments, to
  	  avoid rpm expanding them


author: Hal Burgiss <hal@foobox.net>
changelog:
  - Removed UID 73. Included user-manual and developer-manual in docs.
    Include other actions files. Default shell is now /bin/false.
    Userdel user=junkbust. ChangeLog was not zipped. Removed 
    RPM_OPT_FLAGS kludge.


author: Hal Burgiss <hal@foobox.net>
changelog:
  - Change of $RPM_OPT_FLAGS handling. Added new HTML doc files.
  - Changed owner of /etc/junkbuster to shut up PAM/xauth log noise.


author: Hal Burgiss <hal@foobox.net>
changelog:
  - Added $RPM_OPT_FLAGS support, renaming of old logfile, and 
  - made sure no default shell exists for user junkbust.


author: Stefan Waldherr <stefan@waldherr.org>
changelog:
  - CLF Logging patch by davep@cyw.uklinux.net
  - Hal DeVore <haldevore@earthling.net> fix akamaitech in blocklist


author: Stefan Waldherr <stefan@waldherr.org>
changelog:
  - Steve Kemp skx@tardis.ed.ac.uk's javascript popup patch.
  - Markus Breitenbach breitenb@rbg.informatik.tu-darmstadt.de supplied
    numerous fixes and enhancements for Steve's patch.
  - adamlock@netscape.com (Adam Lock) in the windows version:
    - Taskbar activity spinner always spins even when logging is
    turned off (which is the default) - people who don't
    like the spinner can turn it off from a menu option.
    - Taskbar popup menu has a options submenu - people can now
    open the settings files for cookies, blockers etc.
    without opening the JB window.
    - Logging functionality works again
    - Buffer overflow is fixed - new code uses a bigger buffer
    and snprintf so it shouldn't overflow anymore.
  - Fixed userid swa, group learning problem while installing.
    root must build RPM.
  - Added patch by Benjamin Low <ben@snrc.uow.edu.au> that prevents JB to
    core dump when there is no log file.
  - Tweaked SuSE startup with the help of mohataj@gmx.net and Doc.B@gmx.de.
  - Fixed man page to include imagefile and popupfile.
  - Sanity check for the statistics function added.
  - "Patrick D'Cruze" <pdcruze@orac.iinet.net.au>: It seems Microsoft
   are transitioning Hotmail from FreeBSD/Apache to Windows 2000/IIS.
   With IIS/5, it appears to omit the trailing \r\n from http header
   only messages.  eg, when I visit http://www.hotmail.com, IIS/5
   responds with a HTTP 302 redirect header.  However, this header
   message is missing the trailing \r\n.  IIS/5 then closes the
   connection.  Junkbuster, unfortunately, discards the header becomes
   it thinks it is incomplete - and it is.  MS have transmitted an
   incomplete header!
  - Added bug reports and patch submission forms in the docs.


author: Stefan Waldherr <stefan@waldherr.org>
changelog:
  Andrew <anw@tirana.freewire.co.uk> extended the JB:
         Display of statistics of the total number of requests and the number
         of requests filtered by junkbuster, also the percentage of requests
         filtered. Suppression of the listing of files on the proxy-args page.
         All stuff optional and configurable.


author: Stefan Waldherr <stefan@waldherr.org>
changelog:
  Jan Willamowius (jan@janhh.shnet.org) fixed a bug in the 
         code which prevented the JB from handling URLs of the form
         user:password@www.foo.com. Fixed.


author: Stefan Waldherr <stefan@waldherr.org>
changelog:
  Blank images are no longer cached, thanks to a hint from Markus 
          Breitenbach <breitenb@rbg.informatik.tu-darmstadt.de>. The user 
          agent is NO longer set by the Junkbuster. Sadly, many sites depend 
          on the correct browser version nowadays. Incorporated many 
  	suggestions from Jan "Yenya" Kasprzak <kas@fi.muni.cz> for the
          spec file. Fixed logging problem and since runlevel 2 does not 
          use networking, I replaced /etc/rc.d/rc2.d/S84junkbuster with
          /etc/rc.d/rc2.d/K09junkbuster thanks to Shaw Walker 
          <walker@netgate.net>. You should now be able to build this RPM as 
          a non-root user (mathias@weidner.sem.lipsia.de).


author: Stefan Waldherr <stefan@waldherr.org>
changelog:
  %{_localstatedir}/log/junkbuster set to nobody. Added /etc/junkbuster/imagelist
  	to allow more sophisticated matching of blocked images. Logrotate
  	logfile. Added files for auto-updating the blocklist et al.


author: Stefan Waldherr <stefan@waldherr.org>
changelog:
  Configure blank version via config file. No separate blank
  	version anymore. Added Roland's <roland@spinnaker.rhein.de>
  	patch to show a logo instead of a blank area. Added a suggestion
  	from Alex <alex@cocoa.demon.co.uk>: %{_localstatedir}/lock/subsys/junkbuster.
  	More regexps in the blocklist. Prepared the forwardfile for
  	squid. Extended image regexp with help from gabriel 
  	<somlo@CS.ColoState.EDU>.


author: Stefan Waldherr <stefan@waldherr.org>
changelog:
  All RPMs now identify themselves in the show-proxy-args page.
  	Released Windoze version. Run junkbuster as nobody instead of
  	root.


author: Stefan Waldherr <stefan@waldherr.org>
changelog:
  Newest version. First release (hence the little version number
  	mixture -- 2.0.2-0 instead of 2.0-7). This version tightens 
  	security over 2.0.1; some multi-user sites will need to change 
  	the listen-address in the configuration file. The blank version of
          the Internet Junkbuster has a more sophisticated way of replacing
  	images. All RPMs identify themselves in the show-proxy-args page.


author: Stefan Waldherr <stefan@waldherr.org>
changelog:
  Modified the blocking feature, so that only GIFs and JPEGs are
  	blocked and replaced but not HTML pages. Thanks to 
  	"Gerd Flender" <plgerd@informatik.uni-siegen.de> for this nice
  	idea. Added numerous stuff to the blocklist. Keep patches in
          seperate files and no longer in diffs (easier to maintain).


author: Stefan Waldherr <swa@cs.cmu.edu>
changelog:
  Moved config files to /etc/junkbuster directory, moved man page,
  	added BuildRoot directive (Thanks to Alexey Nogin <ayn2@cornell.edu>)
          Made new version junkbuster-raw (which is only a stripped version of 
          the junkuster rpm, i.e. without my blocklist, etc.)


author: (2.0-1)
changelog:
  Uhm, not that much. Just a new junkbuster version that
  	fixes a couple of bugs ... and of course a bigger 
  	blocklist with the unique Now-less-ads-than-ever(SM)
  	feature.
  	Oh, one thing: I changed the default user agent to Linux -- no 
  	need anymore to support Apple.


author: (2.0-0)
changelog:
  Now-less-ads-than-ever (SM)
  	compiled with gcc instead of cc
  	compiled with -O3, thus it should be a little faster
  	show-proxy-args now works
  	/etc/junkbuster.init wasn't necessary


author: (1.4)
changelog:
  some more config files were put into /etc
  	The junkbuster-blank rpm returns a 1x1 pixel image, that gets 
  	displayed by Netscape instead of the blocked image.
  	Read http://www.waldherr.org/junkbuster/ for
  	further info.


author: (1.3)
changelog:
  The program has been moved to /usr/sbin (from /usr/local/bin)
  	Init- and stopscripts (/etc/rc.d/rc*) have been added so
  	that the junkbuster starts automatically during bootup.
  	The /etc/blocklist file is much more sophisticated. Theoretically
  	one should e.g. browse all major US and German newspapers without
  	seeing one annoying ad.
  	junkbuster.init was modified. It now starts junkbuster with an
  	additional "-r @" flag.


author: David Malcolm <dmalcolm@redhat.com> - 2.1.4-1
changelog:
  - updated from 1.0.10 to 2.1.3
  - removed evolution-webcal.applications; this was removed in version 2.1.1
  - updated e-d-s requirement from 0.0.91 to 1.1.0


author: Akira TAGOH <tagoh@redhat.com> 0.3.0-13
changelog:
  - removed apropos.1, man.1, whatis.1, man.config.5, and makewhatis.8, because the latest man contains those manpages.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Updated all packages to version 1.0.0 from X11R7 RC4
  - Added new lndir, gccmakedep tarballs.  (#173478)
  - Changed manpage dirs from man1x to man1 to match upstream RC4 default.
  - Removed all previous 'misc' patch, as we now pass --with-config-dir to
    configure to specify the location of the Imake config files.
  - Renamed imake patch to xorg-cf-files-1.0.0-ProjectRoot.patch as it did not
    patch imake at all.  This should probably be changed to be a custom Red Hat
    host.def file that is added as a source line instead of randomly patching
    various files.


author: Than Ngo <than@redhat.com> 0.99.2-2
changelog:
  - fix xmkmf to look config files in /usr/share/X11/config
    instead /usr/%{_lib}/X11/config/
  - add host.conf


author: Mike A. Harris <mharris@redhat.com> 0.7.1.3-1
changelog:
  - Updated xorg-x11-drv-sisusb to version 0.7.1.3 from X11R7.0
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.7.1.2-1
changelog:
  - Updated xorg-x11-drv-sisusb to version 0.7.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.7.0-0
changelog:
  - Initial spec file for sisusb video driver generated automatically
    by my xorg-driverspecgen script.


author: Mike A. Harris <mharris@redhat.com> 0.1.0.4-1
changelog:
  - Updated xorg-x11-drv-fbdev to version 0.1.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.1.0-0
changelog:
  - Initial spec file for fbdev video driver generated automatically
    by my xorg-driverspecgen script.


author: Phil Knirsch <pknirsch@redhat.com> - 0.99.3-9.el5
changelog:
  - Fixed a problem with the sysconfig patch (#438877)
  - Corrected the fix for the stale /.suspended file (#270861)
  - Resolves: #438877,#270861


author: Phil Knirsch <pknirsch@redhat.com> - 0.99.3-7.el5
changelog:
  - Print an error if there is a stale /.suspended file (#270861)
  - Fixed problem with hooks running twice (#430077)
  - New version of the sysconfig patch (#438877)
  - Properly own /usr/lib/pm-utils (#447376)
  - Fix vbetool to include POST with external ROMs for Nivida cards (#457332)


author: Phil Knirsch <pknirsch@redhat.com> - 0.99.3-6.el5.18
changelog:
  - Added missing check if messagebus is running (#248514)
  - Add /etc/sysconfig/pm-action (#248517)
  - Check for valid options and output error message and usage on error (#251838)
  - Fixed usage for radeontool (#252293)


author: Phil Knirsch <pknirsch@redhat.com> - 0.99.3-6.el5.12
changelog:
  - Reenable autoquirks by default, disable them as soon as we get any quirks.
    Fixes regressions to RHEL-5 GA (#249544, #248159, #251544)
  - Fixed bug in latest autoquirk patch


author: Phil Knirsch <pknirsch@redhat.com> - 0.99.3-6.el5.8
changelog:
  - Fixed the HAL patch to use dbus-send properly
  - Corrected option for old quirks to be inline with other quirk options
  - Fixed requirement on correct hal version


author: Phil Knirsch <pknirsch@redhat.com> - 0.99.3-6.el5.6
changelog:
  - Patched pm-utils to use dbus signals for suspend and resume if not called
    from hal (#236905)
  - Fixed radeontool not building on x86_64 (#229452)
  - Fixed proper check for /sys/power files (#216978)


author: Phil Knirsch <pknirsch@redhat.com> - 0.99.3-6
changelog:
  - Fixed missing builds for vbetool and radeontool for some archs (#241469)
  - Fixed typo in functions where wrong variable was used (#241633)


author: Phil Knirsch <pknirsch@redhat.com> - 0.19.1-4
changelog:
  - Start/stop correct services in 10NetworkManager hook (#215253)
  - Fixed check for /sys/power/disk and /sys/power/state (#214407)
  - Added proper error messages in case /sys/power/disk or /sys/power/state are
    missing (#215386)
  - Removed service calls and module load/unload for bluetooth hook (#213387)
  - Added hook file to restore the sysfont after resume (#215391)
  - Added the possibility to disable hibernate and suspend completely via the
    config file (#216459)
  - Symlinked the config file to /etc/sysconfig/power-management (#216459)
  - Fixed pm-powersave permission check bug (#222819)
  - Small specfile cleanups


author: Peter Jones <pjones@redhat.com> - 0.19.1-3
changelog:
  - Disable bluetooth suspend/reusme hook by default; the kernel modules seem
    to support this correctly these days.


author: Peter Jones <pjones@redhat.com> - 0.19.1-1
changelog:
  - Hopefully fix Centrino ThinkPad suspend+resume
  - Hopefully fix Intel Mac Mini/MacBook suspend+resume


author: Jeremy Katz <katzj@redhat.com> - 0.19-3
changelog:
  - doing the vbestate save/restore on intel video with the modesetting 
    intel xorg driver is broken.  so don't do it.


author: Peter Jones <pjones@redhat.com> - 0.19-1
changelog:
  - update from CVS
  - move pam and consolehelper stuff here.
  - move video hooks here since HAL isn't ready


author: Peter Jones <pjones@redhat.com> - 0.17-1
changelog:
  - add more helper functions
  - rework things that were forking an extra subshell
  - fix the suspend lock
  - work around bluetooth/usb suspend wackiness


author: Peter Jones <pjones@redhat.com> - 0.16-1
changelog:
  - rework the difference between hibernate and suspend; get rid of PM_MODE
  - add 00clear script
  - move default_resume_kernel from "functions" to 01grub's hibernate section


author: Phil Knirsch <pknirsch@redhat.com> - 0.13-1
changelog:
  - Revert last changes for ATI graphics chips as they seem to cause more
    problems than they solved.


author: Jeremy Katz <katzj@redhat.com> - 0.11-1
changelog:
  - fix display on resume with nvidia graphics
  - add infrastructure to tell what pm-util is running; don't resume 
    video on return from hibernate as the BIOS has already re-initialized it


author: Phil Knirsch <pknirsch@redhat.com> - 0.10-1
changelog:
  - Added missing pciutils-devel BuildRequires (#182566) 
  - Fixed missing vbestata save/restore calls for video suspend/resume (#182167, 
    - Renamed hook scripts to allow local pre and post inserts (#179421)
  - Added support for blinking led lights on Thinkpad Laptops during suspend
    (#179420)
  - Added pm-powersave script for powersaving via HAL (#169054)
  - Added symlinks for pm-shutdown and pm-restart (#165953)


author: Jeremy Katz <katzj@redhat.com> - 0.09-1
changelog:
  - Remove button module on suspend
  - Set default kernel in grub to current one when hibernating 
    so that resume works


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Updated to xinit 1.0.0 from X11R7 RC4.
  - Changed manpage dir from man1x to man1 to match upstream default.


author: Mike A. Harris <mharris@redhat.com> 0.99.3-4
changelog:
  - Added Xsession script from xinitrc, as it is very similar codebase, which
    shares "xinitrc-common" anyway, and all of the display managers use it.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-3
changelog:
  - Added "Provides: xinitrc = 5.0.0-1" for temporary compatibility between
    monolithic and modular X.  This will be removed however for FC5.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-2
changelog:
  - Import custom Red Hat xinit scripts from xinitrc package.
  - Obsolete xinitrc package, as we include the scripts/configs here now.
  - Fix all scripts/configs to avoid the now obsolete /usr/X11R6 prefix.


author: Denys Vlasenko <dvlasenk@redhat.com> - 4.5.18-5
changelog:
  - Remove unneeded changes on QE request
  - Note: still includes fixes for these bugs:
  - Resolves: RHBZ #471169 (incorrent formatting of fcntl64() on32/64 system)
  - Resolves: RHBZ #472053 (SIGKILL might be improperly traced)
  - Resolves: RHBZ #478419 (Improve fairness)


author: Denys Vlasenko <dvlasenk@redhat.com> - 4.5.18-4
changelog:
  - Restore ^C handling inadvertently disabled in fairness fix
  - Note: previous version (4.5.18-3) includes fixes for these bugs:
  - Resolves: RHBZ #471169 (incorrent formatting of fcntl64() on32/64 system)
  - Resolves: RHBZ #472053 (SIGKILL might be improperly traced)


author: Denys Vlasenko <dvlasenk@redhat.com> - 4.5.18-3
changelog:
  - Partial sync up with upsteam #1: whitespace changes
  - Partial sync up with upsteam #2: trivial changes (comments etc)
  - Partial sync up with upsteam #3: flock reporting, fix network ops selection
  - Resolves: RHBZ #471169
  - Partial sync up with upsteam #4: support -D option, blackfin cpu support
  - Partial sync up with upsteam #5: update SIGKILL detection machinery
  - Resolves: RHBZ #472053
  - Improve fairness - do not allow a few threads to usurp strace's attention
  - Resolves: RHBZ #478419


author: Denys Vlasenko <dvlasenk@redhat.com> - 4.5.18-2.el5.1
changelog:
  - Fix the case where we did not nicely report that traced process
    disappeared (SIGKILL etc) while we were examining its state.
  - Resolves: RHBZ #472053


author: Denys Vlasenko <dvlasenk@redhat.com> - 4.5.18-2
changelog:
  - Fix "strace -s N sets string size to N+1" problem (patch by Jeff Bastian)
  - Resolves: RHBZ #467776


author: Roland McGrath <roland@redhat.com> - 4.5.18-1
changelog:
  - build fix for newer kernel headers (#457291)
  - fix CLONE_VFORK handling (#455078)
  - Support new Linux/PPC system call subpage_prot and PROT_SAO flag.
  - In sigaction system call, display sa_flags value along with SIG_DFL/SIG_IGN.
  - Resolves: RHBZ #455874, RHBZ #452501, RHBZ #453438
  - Resolves: RHBZ #454431, RHBZ #455088, RHBZ #445849, RHBZ #435444


author: Roland McGrath <roland@redhat.com> - 4.5.17-1
changelog:
  - handle O_CLOEXEC, MSG_CMSG_CLOEXEC (#365781)
  - fix biarch stat64 decoding (#222275)
  - fix spurious "..." in printing of environment strings (#358241)
  - improve prctl decoding (#364401)
  - fix hang wait on exited child with exited child (#354261)
  - fix biarch fork/vfork (-f) tracing (#447475)
  - fix biarch printing of negative argument kill (#430585)
  - fix biarch decoding of error return values (#447587)
  - fix -f tracing of CLONE_VFORK (#455078)
  - fix ia64 register clobberation in -f tracing (#453438)
  - print SO_NODEFER, SA_RESETHAND instead of SA_NOMASK, SA_ONESHOT (#455821)
  - fix futex argument decoding (#448628, #448629)


author: Roland McGrath <roland@redhat.com> - 4.5.16-1
changelog:
  - fix multithread issues (#240962, #240961, #247907)
  - fix spurious SIGSTOP on early interrupt (#240986)
  - fix utime for biarch (#247185)
  - fix -u error message (#247170)
  - better futex syscall printing (##241467)
  - fix argv/envp printing with small -s settings, and for biarch
  - new syscalls: getcpu, eventfd, timerfd, signalfd, epoll_pwait,
    move_pages, utimensat


author: Roland McGrath <roland@redhat.com> - 4.5.15-1
changelog:
  - biarch fixes (#179740, #192193, #171626, #173050, #218433, #218043)
  - fix -ff -o behavior (#204950, #218435, #193808, #219423)
  - better quotactl printing (#118696)
  - *at, inotify*, pselect6, ppoll and unshare syscalls (#178633, #191275)
  - glibc-2.5 build fixes (#209856)
  - memory corruption fixes (#200621
  - fix race in child setup under -f (#180293)
  - show ipc key values in hex (#198179, #192182)
  - disallow -c with -ff (#187847)
  - Resolves: RHBZ #179740, RHBZ #192193, RHBZ #204950, RHBZ #218435
  - Resolves: RHBZ #193808, RHBZ #219423, RHBZ #171626, RHBZ #173050
  - Resolves: RHBZ #218433, RHBZ #218043, RHBZ #118696, RHBZ #178633
  - Resolves: RHBZ #191275, RHBZ #209856, RHBZ #200621, RHBZ #180293
  - Resolves: RHBZ #198179, RHBZ #198182, RHBZ #187847


author: Jakub Jelinek <jakub@redhat.com> - 4.5.14-4
changelog:
  - Fix ia64 syscall decoding (#206768)
  - Fix build with glibc-2.4.90-33 and up on all arches but ia64
  - Fix build against 2.6.18+ headers


author: Roland McGrath <roland@redhat.com> - 4.5.14-1
changelog:
  - Fix biarch decoding of socket syscalls (#174354).
  - Fix biarch -e support (#173986).
  - Accept numeric syscalls in -e (#174798).
  - Fix ipc syscall decoding (#164755).
  - Improve msgrcv printing (#164757).
  - Man page updates (#165375).
  - Improve mount syscall printing (#165377).
  - Correct printing of restarting syscalls (#165469).


author: Roland McGrath <roland@redhat.com> - 4.5.13-1
changelog:
  - Fix setsockopt decoding on 64-bit (#162449).
  - Fix typos in socket option name strings (#161578).
  - Display more IPV6 socket options by name (#162450).
  - Don't display inappropriate syscalls for -e trace=file (#159340).
  - New selector type -e trace=desc for file-descriptor using calls (#159400).
  - Fix 32-bit old_mmap syscall decoding on x86-64 (#162467, #164215).
  - Fix errors detaching from multithreaded process on interrupt (#161919).
  - Note 4.5.12 fix for crash handling bad signal numbers (#162739).


author: Roland McGrath <roland@redhat.com> - 4.5.12-1
changelog:
  - Fix known syscall recognition for IA32 processes on x86-64 (#158934).
  - Fix bad output for ptrace on x86-64 (#159787).
  - Fix potential buffer overruns (#151570, #159196).
  - Make some diagnostics more consistent (#159308).
  - Update PowerPC system calls.
  - Better printing for Linux aio system calls.
  - Don't truncate statfs64 fields to 32 bits in output (#158243).
  - Cosmetic code cleanups (#159688).


author: Roland McGrath <roland@redhat.com> - 4.5.10-1
changelog:
  - Fix select handling on nonstandard fd_set sizes.
  - Don't print errors for null file name pointers.
  - Fix initial execve output with -i (#143365).


author: Roland McGrath <roland@redhat.com> - 4.5.9-2
changelog:
  - update ia64 syscall list (#146245)
  - fix x86_64 syscall argument extraction for 32-bit processes (#146093)
  - fix -e signal=NAME parsing (#143362)
  - fix x86_64 exit_group syscall handling
  - improve socket ioctl printing (#138223)
  - code cleanups (#143369, #143370)
  - improve mount flags printing (#141932)
  - support symbolic printing of x86_64 arch_prctl parameters (#142667)
  - fix potential crash in getxattr printing


author: Roland McGrath <roland@redhat.com> - 4.5.8-1
changelog:
  - fix multithreaded exit handling (#132150, #135254)
  - fix ioctl name matching (#129808)
  - print RTC_* ioctl structure contents (#58606)
  - grok epoll_* syscalls (#134463)
  - grok new RLIMIT_* values (#133594)
  - print struct cmsghdr contents for sendmsg (#131689)
  - fix clock_* and timer_* argument output (#131420)


author: Roland McGrath <roland@redhat.com> - 4.5.7-2
changelog:
  - new upstream version, misc fixes and updates (#128091, #129166, #128391, #129378, #130965, #131177)


author: Roland McGrath <roland@redhat.com> 4.5.6-1
changelog:
  - new upstream version, updates ioctl lists (#127398), fixes quotactl (#127393), more ioctl decoding (#126917)


author: Roland McGrath <roland@redhat.com> 4.5.3-1
changelog:
  - new upstream version, mq_* calls (#120701), -p vs NPTL (#120462), more fixes (#118694, #120541, #118685)


author: Jakub Jelinek <jakub@redhat.com> 4.4-8
changelog:
  - newer version of the clone fixing patch (Roland McGrath)
  - aio syscalls for i386/ia64/ppc (Ben LaHaise)


author: Preston Brown <pbrown@redhat.com> 4.3-1
changelog:
  - new upstream version.  Seems to have integrated most new syscalls
  - tracing threaded programs is now functional.


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - doh, actually apply the 2.4 syscalls patch
  - make it compile with 2.4.0-test7-pre4+ headers, add
    getdents64 and fcntl64


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - upgrade to 3.99 in order to
  -    add new 2.2.x open flags (#2955).
  -    add new 2.2.x syscalls (#2866).
  - strace 3.1 patches carried along for now.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - added the umoven patch from James Youngman <jay@gnu.org>
  - fixed build problems on newer glibc releases


author: Radek Vykydal <rvykydal@redhat.com> - 0.80.6-7
changelog:
  - Add bootloader --hvargs kickstart option.
    Resolves: rhbz#552957
  - Write out --hvargs kickstart option into anaconda-ks.cfg.
    Related: rhbz#552957


author: Peter Jones <pjones@redhat.com> - 0.80.6-2
changelog:
  - Re-incorperate dropped changelog entries that rpmdiff caught, 
    and dropped fix from 0.80.4-5.
    Related: rhbz#462843


author: Peter Jones <pjones@redhat.com> - 0.80.3-1
changelog:
  - Use the right drive list so we don't get off-by-one errors, missing disks,
    etc. (Resolves: #217434)


author: Peter Jones <pjones@redhat.com> - 0.80.1-1
changelog:
  - Use isys's drive cache instead of creating our own, so we get dm device
    splitting/combining correctly.


author: Jeremy Katz <katzj@redhat.com> - 0.74=1
changelog:
  - add support for creating an isolinux.cfg for live CD
  - remove no-longer used edd code
  - use rhpl instead of butil copies of code
  - build as noarch now


author: Peter Jones <pjones@redhat.com> - 0.68-1
changelog:
  - sync between invocations of grub on smp
  - default to "mbr", not "partition" for grub installation on md


author: Peter Jones <pjones@redhat.com> 0.54-1
changelog:
  - fix more missing sx8 checks
  - no more tabs in python code
  - ppc raid1 booting
  - minor silo.conf bug fix


author: Jeremy Katz <katzj@redhat.com> 0.52-1
changelog:
  - add enablecdboot, enableofboot, and enablenetboot to yaboot.conf 
  - try to detect mac os x and set up dual boot on pmac


author: Chris Lumens <clumens@redhat.com> 0.50-1
changelog:
  - Make sure to write out a --driveorder parameter in the kickstart file
    (#140446).
  - Do a better job of ignoring volume groups - for instance, if the user
    has changed the group's name away from our assumed VolGroupXX (#150630).


author: Jeremy Katz <katzj@redhat.com> - 0.44-1
changelog:
  - don't include /dev/ in the console name (#134336)
  - fix installing boot loader to partition with RAID1 /boot (#127557)


author: Jeremy Katz <katzj@redhat.com> 0.29-1
changelog:
  - yaboot: quotes around append
  - yaboot: nonvram for pSeries
  - yaboot: fix partition=
  - yaboot: fix kernel path


author: Jeremy Katz <katzj@redhat.com> 0.28-1
changelog:
  - write our own yaboot.conf to work better with lvm/raid (#98308)
  - ensure the iSeries cmdline gets blanked


author: Jeremy Katz <katzj@redhat.com> 0.23-1
changelog:
  - read product name information dynamically (using /etc/redhat-release and
    anaconda's /.buildstamp)


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - grubby can do stuff with lilo.conf now, so we don't have to worry
    about updating lilo.conf in the upgrade only mode


author: Chip Turner <cturner@redhat.com>
changelog:
  - turn ssl on and allow Makefile.PL to yse mysql_config to find proper link flags
  - update to 2.1021


author: Maciej Lesniewski <nimir@kis.p.lodz.pl>
changelog:
  [4.34-1]
  - New version
  - Spec rewriten to use %{name} and %{version} macros
  - Removed old log enteries


author: James Antill <jantill@redhat.com> - 3.1.0-4
changelog:
  - Import fixes from Fedora, and UI progress tweaks
  - FTP byterange with specified port
  - reget with HTTP servers that don't support Range
  - Dynamic resizing progress, with totals and visible end state
  - Resolves: rhbz#435156
  - Resolves: rhbz#444085
  - Fedora-Bug: 404211
  - Fedora-Bug: 419241
  - Fedora-Bug: 437197


