# changelog

author: 17:10:14 +0200 Philipp Reisner <phil@linbit.com>
changelog:
  - drbd (8.0.3-1)
   * Fixed a race condition that could cause us to continue to traverse a bio
     after it was freed. (led to an OOPS)
   * Fixed a race condition that could cause us to use members of an ee, after
     it was freed. (led to various weirdness)
   * Language fixes for the man pages.
   * The drbdsetup commands (events, wait-connect,...) release the lock now.
   * Minor fixes and updates to the user land tools and to the peer outdater.


author: 21:32:39 +0200 Philipp Reisner <phil@linbit.com>
changelog:
  - drbd (8.0.2-1)
   * Removed a bug that could cause an OOPS in drbd_al_to_on_disk_bm()
   * Improved the robustness of the UUID based algorithm that decides
     about the resync direction.
   * Fixed the error handling in case a the open() of a backing
     blockdevice fails.
   * Fixed a race condition that could cause a "drbdadm disconnect" to hang.
   * More verbosity in we can not claim a backing block device.
   * More verbosity and paranoia in the bitmap area.
   * On some vendor kernels 8.0.1 did not load because of kzalloc. fixed.
   * Fault injection can now not only be turned on or off, but can be 
     enabled on a per device basis.
   * Fixed the scripts and files needed to build drbd into a kernel.


author: 10:10:26 +0200 Philipp Reisner <phil@linbit.com>
changelog:
  - drbd (8.0.1-1)
   * Fixed some race conditions that could trigger an OOPS when the loca disk
     failes and DRBD detaches itself from the failing disk.
   * Added a missing call to drbd_try_outdate_peer().
   * LVM's LVs expose ambiguous queue settings. When a RAID-0 (md) PV is
     used the present a segment size of 64k but at the same time allow only
     8 sectors. Fixed DRBD to deal with that fact corretly.
   * New option "always-asbp" to also use the after-after-split-brain-policy
     handlers, even it is not possible to determine from the UUIDs that
     the data of the two nodes was related in the past.
   * More verbosity in case a bio_add_page() fails.
   * Replaced kmalloc()/memset() with kzmalloc(), and a wrapper for older kernls
   * A fast version of drbd_al_to_on_disk_bm(). This is necessary for short
     (even sub-second) switchover times while having large "al-extents" settings.
   * Fixed drbdadm's array overflows (of on stack objects)
   * drbdsetup can now dump its usage in a XML format
   * New init script for gentoo
   * Fixed Typos in the usage of /proc/sysrq-trigger in the example config.


author: 17:30:23 +0200 Philipp Reisner <phil@linbit.com>
changelog:
  - drbd (8.0rc2-1)
   * Added the well known automagiacally adjust drbd_config.h to
     make drbd compile on every by vendor's backports defaced 
     kernel. ( Linux-2.6.x only of course )
   * Fixed races with starting and finishing resync processes 
     while heavy application IO is going on.
   * Ported DRBD to the new crypto API (and added a emulation of the
     now API on top of the old one for older 2.6.x kernels)
   * Code to perform better on ethernet networks with jumbo
     frames.
   * Bugfixes to our request code (race conditions).
   * Every error code that is returned by drbdsetup has a 
     textual description by now.


author: 15:19:10 +0200 Philipp Reisner <phil@linbit.com>
changelog:
  - drbd (8.0rc1-1)
   * The drbd-peer-outdater got updated to work in multi node heartbeat
     clusters. (But we still not suceeded to get this into Heartbeat's
     repository accepted.)
   * Fixed resync decission after a crash in a pri-pri cluster.
   * Implemented the ping-timeout option for "sub-second" failover clusters.
   * Implemented all the "violently" options in the reconnect handling.
   * Updated man pages of drbd.conf and drbdsetup.
   * Removed the "self-claiming" on secondary nodes.
   * Fixed an uncountable number of bugs.


author: 15:20:54 +0200 Philipp Reisner <phil@linbit.com>
changelog:
  - drbd (8.0pre6-1)
   * All panic() calls where removed from DRBD.
   * IO errors while accessing the backing storage device are now handled
     correct.
   * Conflict detection for two primaries is in place and tested.
   * More tracing stuff
   * Lots of bugs found and fixed


author: 22:03:54 +0200 Philipp Reisner <phil@linbit.com>
changelog:
  - drbd (8.0pre5-1)
   * The request code was completely rewritten.
   * The write conflict detection code for primary-primary is currently
     broken, but will be fixed soon.
   * drbdsetup is no longer based on IOCTL but works now via
     netlink/connector.
   * drbd_panic() is on its way out.
   * A runtime configurable tracing framework got added.
   * A lot of effort was put into finding and fixing bugs.


author: 12:04:41 +0200 Philipp Reisner <phil@linbit.com>
changelog:
  - drbd (8.0pre4-1)
   * Added the "drbd-peer-outdater" heartbeat plugin.
   * New ("cluster wide") state changes. (Cluster wide serialisation of
     major state changes, like becomming primary, invalidateing a disk etc...)
   * Write requests are now sent by the worker instead out of the process's
     context that calls make_request().
   * The worker thread no longer gets restarted upon loss of connection.
   * A testsuite developed by students of 'FH Hagenberg' was added.


author: 13:46:18 +0200 Philipp Reisner <phil@linbit.com>
changelog:
  - drbd (8.0pre3-1)
   * Now it works on device mapper (LVM) as well as on "real" block devices.
   * Finally (after years) a sane "drbdadm adjust" imprementation, which is
     really really robust.
   * Fixes for 64bit kernel / 32 bit userland environments
   * Fixes in the sys-v init script
   * Renamed "--do-what-I-say" to "--overwrite-data-of-peer". Hopefully
     people now understand what this option does.


author: 17:53:56 +0200 Philipp Reisner <phil@linbit.com>
changelog:
  - drbd (8.0-pre2-1)
   * removed the "on-disconnect" and "split-brain-fix" config options and
     added the "fencing" config option instead.
   * Updated all manpages to cover drbd-8.0
   * /proc/drbd shows the whole drbd_state_t, as well the logging of state
     changes shows every field of drbd_state_t now.
   * Deactivated most of the TCQ code for now, since it changed again
     in the mainline kernel.
   * Minor other fixes.


author: 11:37:56 +0200 Philipp Reisner <phil@linbit.com>
changelog:
  - drbd (8.0_pre1-1)
   * Removed support for Linux-2.4.x
   * Cleanup of the wire protocol.
   * Added optional peer authentication with a shared secret.
   * Consolidated state changes into a central function.
   * Improved, tunable after-split-brain recovery strategies.
   * Always verify all IDs used in the protocol that are used as pointers.
   * Introduced the "outdate" disk state, and commands for managing it.
   * Introduced the "drbdmeta" command, and require the user to create
     meta-data explicitly.
   * Support for primary/primary (for OCFS2, GFS...)
   * Replaced the sync-groups with the sync-after mechanism.
   * The "common" section in the configuration file.
   * Replaced the generation counters (GCs) with data-generation-UUIDs
   * Improved performance by using Linux-2.6's BIOs with up to 32k per
     IO request. Before we transferred only up to 4k per IO request.
   * A Warning if the disk sizes are more than 10% different.
   * A connection teardown packet to differentiate between a crash
     of the peer and a peer that is shut down gracefully.
   * External imposable SyncPause states, to serialize DRBD's resynchronisation
     with the resynchronisation of backing storage's RAID configurations.
   * Backing storage can be hot added to disk less nodes.
   * Prepared for advanced integration to Heartbeat-2.0
   * Changed internal APIs so that missed writes of the meta-data super
     block are reported as they happen.
   * The http://usage.drbd.org sub project.
   * Rewrote the scanner/parser of drbd.conf. 10 times smaller/faster and
     easier to maintain.
   * Asynchronous meta-data IO [ Code drop from the DRBD+ branch ]


author: Johnny Hughes <johnny@centos.org>
changelog:
  - Initial use in CentOS-5
  - Added paevar and modified paevar, smpvar, xenvar, xdumpvar to follow
    EL5 and not FC6 naming conventions.


author: Akemi Yagi <toracat@centos.org> [2.6.18-194.3.1.el5.centos.plus]
changelog:
  - based on CentOS kernel 2.6.18-194.3.1.el5.centos
  - added new config files for i686, x86_64 with extra features turned on
    including all Network Adapters, all Video4Linux adapers, all Radio devices,
    JFS, ReiserFS, NCP (Novell partitions) and LDM (Windows Dynamic
    Partitions) BusLogic support.
  - removed the rhel and olpc sections at the beginning of the prep section
    that apply generic templates
  - added reiserfs patch (bug3156)
  - added sata_sil24 patch (bug3165)
  - Note: NTFS is broken in 5.3 (kernels >=2.6.18-128), therefore is not enabled.
    see bug 3363 bugzilla 481495
  - Note: FUSE is enabled in distro kernel as of 5.4 (kernels >=2.6.8.164)
  - Note: Intel wiki LEDS is enabled in distro kernel in 5.4 (bug 3544)
  - Note: Do not enable CONFIG_RTxxxx_LEDS=y ; one or more of them will
    cause compilation to fail.
  - Note: INFINIBAND_AMSO1100 disabled in 5.4 because enabling it leads to a
    comlilation error.
  - added linux-2.6-net-qlge-fix-crash-with-kvm-guest-device-passthru.patch (bug 4058)
  - added linux-2.6-kvm-balloon-driver-for-guests.patch (bug 4058)
  - added linux-2.6-md-raid5-mark-cancelled-readahead-bios-with-eio.patch (bug 4089) [Bugzilla 512552]
  - added acpi-early-pdc patches (bug 4139)
  - added alps-E6400.patch (bug 4192)
  - added usb-allow-restart.patch (bug 4196)
  - added powernow-k8.patch (bug 3766)


author: Akemi Yagi <toracat@centos.org> [2.6.18-194.17.1.el5.centos.plus]
changelog:
  - based on CentOS kernel 2.6.18-194.17.1.el5.centos
  - added new config files for i686, x86_64 with extra features turned on
    including all Network Adapters, all Video4Linux adapers, all Radio devices,
    JFS, ReiserFS, NCP (Novell partitions) and LDM (Windows Dynamic
    Partitions) BusLogic support.
  - removed the rhel and olpc sections at the beginning of the prep section
    that apply generic templates
  - added reiserfs patch (bug3156)
  - added sata_sil24 patch (bug3165)
  - Note: NTFS is broken in 5.3 (kernels >=2.6.18-128), therefore is not enabled.
    see bug 3363 bugzilla 481495
  - Note: FUSE is enabled in distro kernel as of 5.4 (kernels >=2.6.8.164)
  - Note: Intel wiki LEDS is enabled in distro kernel in 5.4 (bug 3544)
  - Note: Do not enable CONFIG_RTxxxx_LEDS=y ; one or more of them will
    cause compilation to fail.
  - Note: INFINIBAND_AMSO1100 disabled in 5.4 because enabling it leads to a
    comlilation error.
  - added acpi-early-pdc patches (bug 4139)
  - added alps-E6400.patch (bug 4192)
  - added usb-allow-restart.patch (bug 4196)
  - added powernow-k8.patch ver2 (bug 3766)
  - enabled "cx88-dvb.ko" and related modules (bug 4365)
  - added loop_unplug patch (bug 3886)
  - added r8169-fix-for-broken-register-writes.patch (bug 4317; bugzilla 581654)


author: Akemi Yagi <toracat@centos.org> [2.6.18-194.11.3.el5.centos.plus]
changelog:
  - based on CentOS kernel 2.6.18-194.11.3.el5.centos
  - added new config files for i686, x86_64 with extra features turned on
    including all Network Adapters, all Video4Linux adapers, all Radio devices,
    JFS, ReiserFS, NCP (Novell partitions) and LDM (Windows Dynamic
    Partitions) BusLogic support.
  - removed the rhel and olpc sections at the beginning of the prep section
    that apply generic templates
  - added reiserfs patch (bug3156)
  - added sata_sil24 patch (bug3165)
  - Note: NTFS is broken in 5.3 (kernels >=2.6.18-128), therefore is not enabled.
    see bug 3363 bugzilla 481495
  - Note: FUSE is enabled in distro kernel as of 5.4 (kernels >=2.6.8.164)
  - Note: Intel wiki LEDS is enabled in distro kernel in 5.4 (bug 3544)
  - Note: Do not enable CONFIG_RTxxxx_LEDS=y ; one or more of them will
    cause compilation to fail.
  - Note: INFINIBAND_AMSO1100 disabled in 5.4 because enabling it leads to a
    comlilation error.
  - added acpi-early-pdc patches (bug 4139)
  - added alps-E6400.patch (bug 4192)
  - added usb-allow-restart.patch (bug 4196)
  - added powernow-k8.patch ver2 (bug 3766)
  - enabled "cx88-dvb.ko" and related modules (bug 4365)
  - added loop_unplug patch (bug 3886)


author: Jiri Pirko <jpirko@redhat.com> [2.6.18-194.11.2.el5]
changelog:
  - [mm] pass correct mm when growing stack (Jiri Pirko) [607857 607858] {CVE-2010-2240}
  - [mm] fix up some user-visible effects of stack guard page (Jiri Pirko) [607857 607858] {CVE-2010-2240}
  - [mm] fix page table unmap for stack guard page properly (Jiri Pirko) [607857 607858] {CVE-2010-2240}
  - [mm] fix missing unmap for stack guard page failure case (Jiri Pirko) [607857 607858] {CVE-2010-2240}
  - [mm] keep a guard page below a grow-down stack segment (Jiri Pirko) [607857 607858] {CVE-2010-2240}


author: Akemi Yagi <toracat@centos.org> [2.6.18-194.8.1.el5.centos.plus]
changelog:
  - based on CentOS kernel 2.6.18-194.8.1.el5.centos
  - added new config files for i686, x86_64 with extra features turned on
    including all Network Adapters, all Video4Linux adapers, all Radio devices,
    JFS, ReiserFS, NCP (Novell partitions) and LDM (Windows Dynamic
    Partitions) BusLogic support.
  - removed the rhel and olpc sections at the beginning of the prep section
    that apply generic templates
  - added reiserfs patch (bug3156)
  - added sata_sil24 patch (bug3165)
  - Note: NTFS is broken in 5.3 (kernels >=2.6.18-128), therefore is not enabled.
    see bug 3363 bugzilla 481495
  - Note: FUSE is enabled in distro kernel as of 5.4 (kernels >=2.6.8.164)
  - Note: Intel wiki LEDS is enabled in distro kernel in 5.4 (bug 3544)
  - Note: Do not enable CONFIG_RTxxxx_LEDS=y ; one or more of them will
    cause compilation to fail.
  - Note: INFINIBAND_AMSO1100 disabled in 5.4 because enabling it leads to a
    comlilation error.
  - added acpi-early-pdc patches (bug 4139)
  - added alps-E6400.patch (bug 4192)
  - added usb-allow-restart.patch (bug 4196)
  - added powernow-k8.patch (bug 3766)
  - enabled "cx88-dvb.ko" and related modules (bug 4365)


author: Daniel de Kok <daniel@centos.org> 36-2
changelog:
  - Kernel 2.6.18-53.el5 now defines some CPU_.*FROZEN macros, but doesn't
    define others. Modify compatibility macros to check each case.


author: Akemi Yagi <toracat@centos.org> [2.6.18-194.11.4.el5.centos.plus]
changelog:
  - based on CentOS kernel 2.6.18-194.11.4.el5.centos
  - added new config files for i686, x86_64 with extra features turned on
    including all Network Adapters, all Video4Linux adapers, all Radio devices,
    JFS, ReiserFS, NCP (Novell partitions) and LDM (Windows Dynamic
    Partitions) BusLogic support.
  - removed the rhel and olpc sections at the beginning of the prep section
    that apply generic templates
  - added reiserfs patch (bug3156)
  - added sata_sil24 patch (bug3165)
  - Note: NTFS is broken in 5.3 (kernels >=2.6.18-128), therefore is not enabled.
    see bug 3363 bugzilla 481495
  - Note: FUSE is enabled in distro kernel as of 5.4 (kernels >=2.6.8.164)
  - Note: Intel wiki LEDS is enabled in distro kernel in 5.4 (bug 3544)
  - Note: Do not enable CONFIG_RTxxxx_LEDS=y ; one or more of them will
    cause compilation to fail.
  - Note: INFINIBAND_AMSO1100 disabled in 5.4 because enabling it leads to a
    comlilation error.
  - added acpi-early-pdc patches (bug 4139)
  - added alps-E6400.patch (bug 4192)
  - added usb-allow-restart.patch (bug 4196)
  - added powernow-k8.patch ver2 (bug 3766)
  - enabled "cx88-dvb.ko" and related modules (bug 4365)
  - added loop_unplug patch (bug 3886)


author: Akemi Yagi <toracat@centos.org> [2.6.18-194.el5.centos.plus]
changelog:
  - based on CentOS kernel 2.6.18-194.el5.centos
  - added new config files for i686, x86_64 with extra features turned on
    including all Network Adapters, all Video4Linux adapers, all Radio devices,
    JFS, ReiserFS, NCP (Novell partitions) and LDM (Windows Dynamic
    Partitions) BusLogic support.
  - removed the rhel and olpc sections at the beginning of the prep section
    that apply generic templates
  - added reiserfs patch (bug 3156)
  - added sata_sil24 patch (bug 3165)
  - Note: NTFS is broken in 5.3 (kernels >=2.6.18-128), therefore is not enabled.
    see bug 3363 bugzilla 481495
  - Note: FUSE is enabled in distro kernel as of 5.4 (kernels >=2.6.8.164)
  - Note: Intel wiki LEDS is enabled in distro kernel in 5.4 (bug 3544)
  - Note: Do not enable CONFIG_RTxxxx_LEDS=y ; one or more of them will
    cause compilation to fail.
  - Note: INFINIBAND_AMSO1100 disabled in 5.4 because enabling it leads to a
    comlilation error.
  - added acpi-early-pdc patches (bug 4139)
  - added alps-E6400.patch (bug 4192)
  - added usb-allow-restart.patch (bug 4196)


author: Thomas Woerner <twoerner@redhat.com> 2:2.3.2-1
changelog:
  - new version 2.3.2 with major upstream fixes:
    - corrupted queue file after a request to modify a short message header
    - panic after spurious Milter request when a client was rejected
    - maked the Milter more tolerant for redundant "data cleanup" requests
  - applying pflogsumm-conn-delays-dsn-patch from postfix tree to pflogsumm


author: Thomas Woerner <twoerner@redhat.com> 2:2.2.10-1
changelog:
  - new version 2.2.10
  - added option LDAP_DEPRECATED to support deprecated ldap functions for now
  - fixed build without pflogsumm support (#188470)


author: Thomas Woerner <twoerner@redhat.com> 2:2.2.5-2.1
changelog:
  - replaced postconf and postalias call in initscript with newaliases (#156358)
  - fixed initscripts messages (#155774)
  - fixed build problems when sasl is disabled (#164773)
  - fixed pre-definition of mailbox_transport lmtp socket path (#122910)


author: Thomas Woerner <twoerner@redhat.com> 2:2.2.0-1
changelog:
  - new version 2.2.0
  - cleanup of spec file: removed external TLS and IPV6 patches, removed 
    smtp_sasl_proto patch
  - dropped samples directory till there are good examples again (was TLS and
    IPV6)
  - v2.2.0 fixes code problems: #132798 and #137858


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.5-5.1
changelog:
  - fixed open relay bug in postfix ipv6 patch: new version 1.26 (#146731)
  - fixed permissions on doc directory (#147280)
  - integrated fixed fqdn patch from Joseph Dunn (#139983)


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.5-2.2
changelog:
  - automated postalias call in init script
  - removed postconf call from spec file: moved changes into patch


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.5-2
changelog:
  - switched over to system aliases file and database in /etc/ (#117661)
  - new reuires and buildrequires for setup >= 2.5.36-1


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.4-1
changelog:
  - new version 2.1.4
  - new ipv6 and tls+ipv6 patches: 1.25-pf-2.1.4
  - new pfixtls-0.8.18-2.1.3-0.9.7d patch


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.1-3.1
changelog:
  - fixed directory permissions in %doc (#125406)
  - fixed missing spool dirs (#125460)
  - fixed verify problem for aliases.db (#125461)
  - fixed bogus upgrade warning (#125628)
  - more spec file cleanup


author: John Dennis <jdennis@redhat.com> 2:2.0.18-4
changelog:
  - remove version from pflogsumm subpackage, it was resetting the
    version used in the doc directory, fixes bug 119213


author: John Dennis <jdennis@finch.boston.redhat.com> 2:2.0.18-1
changelog:
  - bring source up to upstream release 2.0.18
  - include pflogsumm, fixes bug #68799
  - include smtp-sink, smtp-source man pages, fixes bug #118163


author: John Dennis <jdennis@porkchop.devel.redhat.com>
changelog:
  - set sasl back to v2 for mainline, this is good for fedora and beyond,
    for RHEL3, we'll branch and set set sasl to v1 and turn off ipv6


author: John Dennis <jdennis@porkchop.devel.redhat.com>
changelog:
  - revert back to v1 of sasl because LDAP still links against v1 and we can't 
  - bump revision for build
    have two different versions of the sasl library loaded in one load image at
    the same time. How is that possible? Because the sasl libraries have different 
    names (libsasl.so & libsasl2.so) but export the same symbols :-(
    Fixes bugs 115249 and 111767


author: John Dennis <jdennis@finch.boston.redhat.com> 2:2.0.16-4
changelog:
  - remove mysqlclient prereq, fixes bug 101779
  - remove md5 verification override, this fixes bug 113370. Write parse-postfix-files
    script to generate explicit list of all upstream files with ownership, modes, etc.
    carefully add back in all other not upstream files, files list is hopefully
    rock solid now.


author: John Dennis <jdennis@finch.boston.redhat.com> 2:2.0.16-3
changelog:
  - add zlib-devel build prereq, fixes bug 112822
  - remove copy of resolve.conf into chroot jail, fixes bug 111923


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - upgrade to new 2.0.11 upstream release
  - fix authentication problems
  - rewrite SASL documentation
  - upgrade to use SASL version 2
  - Fix bugs 75439, 81913 90412, 91225, 78020, 90891, 88131


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - upgrade to release 2.0.6
  - remove chroot as this is now the preferred installation according to Wietse Venema, the postfix author


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - fix shell in /etc/passwd (#68373)
  - fix documentation in /etc/postfix (#65858)
  - Provides: /usr/bin/newaliases (#66746)
  - fix autorequires by changing /usr/local/bin/perl to /usr/bin/perl in a
    script in %doc (#68852), although I don't think this is necessary anymore


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed missing smtpd.conf file for SASL support and included SASL Postfix
    Red Hat HOWTO (#62505).
  - Included SASL2 support patch (#68800).


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.4-1
changelog:
  - 1.1.4
  - TLS 0.8.4
  - Move postalias run from %post to init script to work around
    anaconda being broken.


author: Nalin Dahyabhai <nalin@redhat.com> 1.1.3-3
changelog:
  - adjust the default postfix-files config file to match the alternatives setup
    by altering the arguments passed to post-install in the %install phase
    (otherwise, it might point to sendmail's binaries, breaking it rather rudely)
  - adjust the post-install script so that it silently uses paths which have been
    modified for use with alternatives, for upgrade cases where the postfix-files
    configuration file isn't overwritten
  - don't forcefully strip files -- that's a build root policy
  - remove hard requirement on openldap, library dependencies take care of it
  - redirect %postun to /dev/null
  - don't remove the postfix user and group when the package is removed


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.3-2
changelog:
  - listen on 127.0.0.1 only by default (#60071)
  - Put config samples in /usr/share/doc/postfix-2.3.3 rather than
    /etc/postfix (#60072)
  - Some spec file cleanups


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.3-1
changelog:
  - 1.1.3, TLS 0.8.3
  - Fix updating
  - Don't run the statistics cron job
  - remove requirement on perl Date::Calc


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.2-1
changelog:
  - Initial Red Hat Linux packaging, based on spec file from
    Simon J Mudd <sjmudd@pobox.com>
  - Changes from that:
    - Set up chroot environment in triggers to make sure we catch glibc errata
    - Remove some hacks to support building on all sorts of distributions at
      the cost of specfile readability
    - Remove postdrop group on deletion


author: Akemi Yagi <toracat@centos.org> [2.6.18-194.17.4.el5.centos.plus]
changelog:
  - based on CentOS kernel 2.6.18-194.17.4.el5.centos
  - added new config files for i686, x86_64 with extra features turned on
    including all Network Adapters, all Video4Linux adapers, all Radio devices,
    JFS, ReiserFS, NCP (Novell partitions) and LDM (Windows Dynamic
    Partitions) BusLogic support.
  - removed the rhel and olpc sections at the beginning of the prep section
    that apply generic templates
  - added reiserfs patch (bug3156)
  - added sata_sil24 patch (bug3165)
  - Note: NTFS is broken in 5.3 (kernels >=2.6.18-128), therefore is not enabled.
    see bug 3363 bugzilla 481495
  - Note: FUSE is enabled in distro kernel as of 5.4 (kernels >=2.6.8.164)
  - Note: Intel wiki LEDS is enabled in distro kernel in 5.4 (bug 3544)
  - Note: Do not enable CONFIG_RTxxxx_LEDS=y ; one or more of them will
    cause compilation to fail.
  - Note: INFINIBAND_AMSO1100 disabled in 5.4 because enabling it leads to a
    comlilation error.
  - added acpi-early-pdc patches (bug 4139)
  - added alps-E6400.patch (bug 4192)
  - added usb-allow-restart.patch (bug 4196)
  - added powernow-k8.patch ver2 (bug 3766)
  - enabled "cx88-dvb.ko" and related modules (bug 4365)
  - added loop_unplug patch (bug 3886)
  - added r8169-fix-for-broken-register-writes.patch (bug 4317; bugzilla 581654)
  - added pci-re-enable-devices-on-resume.patch (bug 4552; bugzilla 644440)


author: Johnny Hughes <johnny@centos.org> 2.2.46-1
changelog:
  - upgraded to upstream version 2.2.46
  - added e2fsprogs-devel and ncurses-devel as build requirements.


author: Akemi Yagi <toracat@centos.org> [2.6.18-194.11.1.el5.centos.plus]
changelog:
  - based on CentOS kernel 2.6.18-194.11.1.el5.centos
  - added new config files for i686, x86_64 with extra features turned on
    including all Network Adapters, all Video4Linux adapers, all Radio devices,
    JFS, ReiserFS, NCP (Novell partitions) and LDM (Windows Dynamic
    Partitions) BusLogic support.
  - removed the rhel and olpc sections at the beginning of the prep section
    that apply generic templates
  - added reiserfs patch (bug3156)
  - added sata_sil24 patch (bug3165)
  - Note: NTFS is broken in 5.3 (kernels >=2.6.18-128), therefore is not enabled.
    see bug 3363 bugzilla 481495
  - Note: FUSE is enabled in distro kernel as of 5.4 (kernels >=2.6.8.164)
  - Note: Intel wiki LEDS is enabled in distro kernel in 5.4 (bug 3544)
  - Note: Do not enable CONFIG_RTxxxx_LEDS=y ; one or more of them will
    cause compilation to fail.
  - Note: INFINIBAND_AMSO1100 disabled in 5.4 because enabling it leads to a
    comlilation error.
  - added acpi-early-pdc patches (bug 4139)
  - added alps-E6400.patch (bug 4192)
  - added usb-allow-restart.patch (bug 4196)
  - added powernow-k8.patch ver2 (bug 3766)
  - enabled "cx88-dvb.ko" and related modules (bug 4365)
  - added loop_unplug patch (bug 3886)


author: Thomas Woerner <twoerner@redhat.com> 2:2.3.3-2.1
changelog:
  - fixed postfix privilege problem with symlinks in the mail spool directory
    (CVE-2008-2936)
    Resolves: rhbz#456717


author: Robert Scheck <redhat@linuxnetz.de> 2.8.3-1
changelog:
  - Upgrade to 2.8.3 (#196599)
  - Applied Russell Coker's suggested patch to improve the
    performance for SELinux machines significantly (#120622)


author: Jeremy Katz <katzj@redhat.com> - 2.6.13-1
changelog:
  - update to 2.6.13 per request of upstream
  - fixes mount by label of xfs on former raid partition (#122043)


author: Phil Knirsch <pknirsch@redhat.com> 2:3.6.4-5
changelog:
  - Bumped release and rebuilt
  - Removed s390 and s390x again until i get around fixing the bitops related
    stuff (which is borken on big-endian).


author: Tim Powers <timp@redhat.com>
changelog:
  - rebuilt, for some reason the build date for the binary is not
    matching the build date for the SRPM.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update to 3.x.0f, many important fixes in fsck
  - Add missing README (#30556)
  - Use -v2 by default in mkreiserfs (#30556)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - initial RPM
  - changes from base package:
    - Fix a security problem (yet another tmp file issue)
    - Fix an fd leak
    - Get rid of the config.cache file, it contains broken settings
    - Install man pages
    - Fix locations of binaries, installing this stuff to "bin" is
      not really a good idea
    - Fix build on alpha and ia64


