


MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



NAME
     makeindex - a general purpose,  formatter-independent  index
     processor

SYNOPSIS
     makeindex [-c] [-g] [-i] [-l] [-o ind] [-p  num]  [-q]  [-r]
     [-s sfile] [-t log] [idx0 idx1 idx2...]

DESCRIPTION
     The program makeindex  is  a  general  purpose  hierarchical
     index  generator;  it accepts one or more input files (often
     produced by a  text  formatter  such  as  TeX  (tex(1L))  or
     troff(1),  sorts  the  entries,  and produces an output file
     which can be formatted.  The index can have up to three lev-
     els  (0,  1,  and  2)  of subitem nesting.  The way in which
     words are flagged for indexing within the main  document  is
     specific  to the formatter used; makeindex does not automate
     the process of selecting these words.  As the  output  index
     is  hierarchical,  makeindex can be considered complimentary
     to the awk(1)-based make.index(1L)  system  of  Bentley  and
     Kernighan,  which  is  specific  to troff(1), generates non-
     hierarchical indices, and employs a much simpler syntax  for
     indicating  index  entries.   For  illustration  of use with
     troff and TeX, see the section EXAMPLES below.

     The formats of the input and output files are specified in a
     style  file; by default, input is assumed to be a .idx file,
     as generated by LaTeX.

     Unless specified explicitly, the  base  name  of  the  first
     input  file  (idx0)  is used to determine the names of other
     files.  For each input file name specified, a file  of  that
     name is sought.  If this file is not found and the file name
     has no extension, the extension .idx  is  appended.   If  no
     file with this name is found, makeindex aborts.

     For important notes on how to select index keywords, see the
     document  by Lamport cited below.  As an issue separate from
     selecting index keywords, a systematic mechanism for placing
     index  terms in a document is suggested in Index Preparation
     and Processing, a paper cited below.

OPTIONS
     -c        Compress intermediate blanks (ignoring leading and
               trailing  blanks and tabs).  By default, blanks in
               the index key are retained.

     -g        Employ German  word  ordering  in  the  index,  in
               accord  with  rules  set  forth  in  DIN 5007.  By
               default, makeindex  employs  a  word  ordering  in
               which  precedence  is: symbols, numbers, uppercase
               letters,  lowercase  letters.   The  sequence   in



Sun Release 4.1   Last change: 10 December 1991                 1






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



               German   word   ordering  is:  symbols,  lowercase
               letters, uppercase  letters,  numbers.   Addition-
               ally,  this  option enables makeindex to recognize
               the German TeX-commands {"a, "o,  "u  and  "s}  as
               {ae,  oe,  ue  and  ss}  during the sorting of the
               entries.  The quote character must be redefined in
               a style file (for example, redefine quote as '+').
               If the quote character is not redefined, makeindex
               will produce an error message and abort.

     -i        Take input from stdin.  When this option is speci-
               fied and -o is not, output is written to stdout.

     -l        Letter ordering; by default, word ordering is used
               (see the ORDERING section).

     -o ind    Employ ind as the output index file.  By  default,
               the  file  name is created by appending the exten-
               sion .ind to the base name of the first input file
               (idx0).

     -p num    Set the starting page number of the  output  index
               file  to  be num (useful when the index file is to
               be formatted separately).  The argument num may be
               numerical or one of the following:

               any       The starting page  is  the  last  source
                         page number plus 1.

               odd       The starting page is the first odd  page
                         following the last source page number.

               even      The starting page is the first even page
                         following the last source page number.

               The last source  page  is  obtained  by  searching
               backward in the log file for the first instance of
               a number included within  paired  square  brackets
               ([...]).   If  a page number is missing or the log
               file is not found, no attempt will be made to  set
               the  starting  page  number.   The source log file
               name is determined by appending the extension .log
               to the base name of the first input file (idx0).

     -q        Quiet  mode;  send  no  messages  to  stderr.   By
               default,  progress  and error messages are sent to
               stderr as well as to the transcript file.

     -r        Disable implicit page range formation; page ranges
               must be created by using explicit range operators;
               see SPECIAL EFFECTS below.  By default,  three  or
               more    successive    pages    are   automatically



Sun Release 4.1   Last change: 10 December 1991                 2






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



               abbreviated as a range (e.g. 1-5).

     -s sty    Employ sty as the style file  (no  default).   The
               environment  variable  INDEXSTYLE defines the path
               where the style file should be found.

     -t log    Employ log as the transcript  file.   By  default,
               the  file  name is created by appending the exten-
               sion .ilg to the base name of the first input file
               (idx0).

STYLE FILE
     The style file informs makeindex about  the  format  of  the
     .idx input files and the intended format of the final output
     file; examples appear below.  This file can reside  anywhere
     in  the path defined by the environment variable INDEXSTYLE.
     The style file contains a  list  of  <specifier,  attribute>
     pairs.  There are two types of specifiers: input and output.
     Pairs do not have to appear in any particular order.  A line
     begun by `%' is a comment.  In the following list of specif-
     iers and arguments, <string> is an arbitrary  string  delim-
     ited  by  double  quotes  ("..."), <char> is a single letter
     embraced by single quotes ('...'), and <number> is a  nonne-
     gative  integer.   The maximum length of a <string> is 2048.
     A  literal  backslash  or  quote  must  be  escaped  (by   a
     backslash).   Anything  not specified in the style file will
     be assigned a default value, which is shown at the  head  of
     the rightmost column.

  INPUT STYLE SPECIFIERS
     actual <char>            '@'
                              Symbol  indicating  that  the  next
                              entry  is  to  appear in the output
                              file.

     arg_close <char>         '}'
                              Closing  delimiter  for  the  index
                              entry argument.

     arg_open <char>          '{'
                              Opening  delimiter  for  the  index
                              entry argument.

     encap <char>             '|'
                              Symbol indicating that the rest  of
                              the  argument list is to be used as
                              the encapsulating command  for  the
                              page number.

     escape <char>            '\\'
                              Symbol which escapes the  following
                              letter, unless its preceding letter



Sun Release 4.1   Last change: 10 December 1991                 3






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



                              is escape.  Note: quote is used  to
                              escape the letter which immediately
                              follows it, but if it  is  preceded
                              by escape, it is treated as a ordi-
                              nary character.  These two  symbols
                              must be distinct.

     keyword <string>         "\\indexentry"
                              Command which tells makeindex  that
                              its argument is an index entry.

     level <char>             '!'
                              Delimiter denoting a new  level  of
                              subitem.

     quote <char>             '"'
                              Note: quote is used to  escape  the
                              letter  which  immediately  follows
                              it,  but  if  it  is  preceded   by
                              escape, it is treated as a ordinary
                              character.  These two symbols  must
                              be distinct.

     range_close <char>       ')'
                              Closing  delimiter  indicating  the
                              end of an explicit page range.

     range_open <char>        '('
                              Opening  delimiter  indicating  the
                              beginning   of   an  explicit  page
                              range.

  OUTPUT STYLE SPECIFIERS
     preamble <string>        "\\begin{theindex}\n"
                              Preamble of output file.

     postamble <string>       "\n\n\\end{theindex}\n"
                              Postamble of output file.

     setpage_prefix <string>  "\n  \\setcounter{page}{"
                              Prefix of command  which  sets  the
                              starting page number.

     setpage_suffix <string>  "}\n"
                              Suffix of command  which  sets  the
                              starting page number.

     group_skip <string>      "\n\n  \\indexspace\n"
                              Vertical  space  to   be   inserted
                              before a new group begins.

     headings_flag <string>   0



Sun Release 4.1   Last change: 10 December 1991                 4






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



                              Flag indicating  treatment  of  new
                              group  headers,  which are inserted
                              when before a new  group  (symbols,
                              numbers, and the 26 letters): posi-
                              tive  values  cause  an   uppercase
                              letter  to be inserted between pre-
                              fix and suffix, and negative values
                              cause  a  lowercase  letter  to  be
                              inserted (default is 0, which  pro-
                              duces no header).

     heading_prefix <string>  ""
                              Header prefix to be inserted before
                              a new letter begins.

     symhead_positive <string>
                              "Symbols"
                              Heading for symbols to be  inserted
                              if headings_flag is positive.

     symhead_negative <string>
                              "symbols"
                              Heading for symbols to be  inserted
                              if headings_flag is negative.

     numhead_positive <string>
                              "Numbers"
                              Heading for numbers to be  inserted
                              if headings_flag is positive.

     numhead_negative <string>
                              "numbers"
                              Heading for numbers to be  inserted
                              if headings_flag is negative.

     item_0 <string>          "\n  \\item "
                              Command to be inserted between  two
                              primary (level 0) items.

     item_1 <string>          "\n     \\subitem "
                              Command to be inserted between  two
                              secondary (level 1) items.

     item_2 <string>          "\n       \\subsubitem "
                              Command to be inserted between  two
                              level 2 items.

     item_01  <string>        "\n    \\subitem "
                              Command to be  inserted  between  a
                              level 0 item and a level 1 item.

     item_x1 <string>         "\n    \\subitem "



Sun Release 4.1   Last change: 10 December 1991                 5






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



                              Command to be  inserted  between  a
                              level  0  item  and a level 1 item,
                              where the level  0  item  does  not
                              have associated page numbers.

     item_12 <string>         "\n    \\subsubitem "
                              Command to be  inserted  between  a
                              level 1 item and a level 2 item.

     item_x2 <string>         "\n    \\subsubitem "
                              Command to be  inserted  between  a
                              level  1  item  and a level 2 item,
                              where the level  1  item  does  not
                              have associated page numbers.

     delim_0 <string>         ", "
                              Delimiter to be inserted between  a
                              level  0  key  and  its  first page
                              number (default: comma followed  by
                              a blank).

     delim_1 <string>         ", "
                              Delimiter to be inserted between  a
                              level  1  key  and  its  first page
                              number (default: comma followed  by
                              a blank).

     delim_2 <string>         ", "
                              Delimiter to be inserted between  a
                              level  2  key  and  its  first page
                              number (default: comma followed  by
                              a blank).

     delim_n <string>         ", "
                              Delimiter to  be  inserted  between
                              two  page  numbers for the same key
                              in any level (default:  comma  fol-
                              lowed by a blank).

     delim_r <string>         "--"
                              Delimiter to  be  inserted  between
                              the   starting   and   ending  page
                              numbers of a range.

     delim_t <string>         ""
                              Delimiter to be inserted at the end
                              of a page list.  This delimiter has
                              no effect on entries which have  no
                              associated page list.

     encap_prefix <string>    "\\"
                              First  part  of  prefix   for   the



Sun Release 4.1   Last change: 10 December 1991                 6






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



                              command which encapsulates the page
                              number.

     encap_infix <string>     "{"
                              Second part of prefix for the  com-
                              mand  which  encapsulates  the page
                              number.

     encap_suffix <string>    "}".
                              Suffix for the command which encap-
                              sulates the page number.

     line_max <number>        72
                              Maximum length of  a  line  in  the
                              output, beyond which a line wraps.

     indent_space <string>    "\t\t"
                              Space to be inserted in front of  a
                              wrapped line (default: two tabs).

     indent_length <number>   16
                              Length  of  indent_space  (default:
                              16, equivalent to 2 tabs).

EXAMPLES
  TeX EXAMPLE
     The following example shows a style  file  called  book.ist,
     which  defines  an  index  for a book which can be formatted
     independently of the main source:

          preamble
          "\\documentstyle[12pt]{book}
          \\begin{document}
          \\begin{theindex}
          {\\small\n"
          postamble
          "\n\n}
          \\end{theindex}
          \\end{document}\n"

     Assuming that a particular book style requires the index (as
     well  as any chapters) to start from an odd page number, and
     that the input file is named foo.idx, the following  command
     line produces output in file footmp.ind:

          makeindex  -s book.ist  -o footmp.ind  -p odd  foo

     Here a  non-default  output  file  name  is  used  to  avoid
     clobbering  the  output  for  the  book  itself  (presumably
     foo.dvi, which would have been  the  default  name  for  the
     index output file!).




Sun Release 4.1   Last change: 10 December 1991                 7






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



  TROFF EXAMPLE
     A sample control file for creating an index, which  we  will
     assume resides in the file sample.ist:

          keyword "IX:"
          preamble
          ".\\\" start of index output
          \".\\\" enter two column mode
          .2C
          .SH
          .ce
          INDEX
          .XS
          INDEX
          .XE
          .R
          .ps 9p
          .vs 11p
          .sp
          .de I1
          .ti 0.25i
          ..
          .de I2
          .ti 0.5i
          .."
          postamble "\n.\\\" end of index output"
          setpage_prefix "\n.nr % "
          setpage_suffix ""
          group_skip "\n.sp 1.0"
          headings_flag 1
          heading_prefix "\n.IS\n"
          heading_suffix "\n.IE"
          item_0 "\n.br\n"
          item_1 "\n.I1\n"
          item_2 "\n.I2\n"
          item_01 "\n.I1\n"
          item_x1 "\n.I1\n"
          item_12 "\n.I2\n"
          item_x2 "\n.I2\n"
          delim_0 ", "
          delim_1 ", "
          delim_2 ", "
          delim_r "-"
          delim_t "."
          encap_prefix "\\fB"
          encap_infix ""
          encap_suffix "\\fP"
          indent_space ""
          indent_length 0

     The local macro package may require modification, as in this
     example of an extension to the -ms macros (note that at some



Sun Release 4.1   Last change: 10 December 1991                 8






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



     sites, this macro should replace a pre-existing macro of the
     same name):

          .
          .de IX
          .ie '\\n(.z'' .tm IX: \\$1 \\$2 \\$3 \\$4 \\$5 \\$6 \\$7 \\$8 \\$9 {\\n(PN}
          .el \\!.IX \\$1 \\$2 \\$3 \\$4 \\$5 \\$6 \\$7 \\$8 \\$9 {\\n(PN}
          ..

     (note that the string {\\n(PN} is separated from the rest of
     the  line  by  a  tab.  If your local macro package does not
     contain this extension, just  include  those  lines  at  the
     beginning  of  your  file.   Here is a simple troff(1) input
     file, which we will assume is named sample.txt:

          This is a sample file to test the \fImakeindex\fP(1L)
          program, and see
          .IX {indexing!programs!C language}
          .IX {makeindex@\fImakeindex\fP(1L)}
          .bp
          .rs
          .IX {Knuth}
          .IX {typesetting!computer-aided}
          how well it functions in the \fItroff\fP(1) environment.

     Note that index entries are  indicated  by  the  .IX  macro,
     which  causes  the  following  text  to be written to stdout
     along with the current page number.

  CREATING THE INDEX FILE IN THE BOURNE SHELL
     To create an input file for makeindex, in the  Bourne  shell
     environment, do the equivalent at your site of the command:

     psroff -ms -Tpsc -t sample.txt > /dev/null 2> sample.tmp

     Some sites will  require  ditroff  instead  of  psroff.   To
     filter out any genuine error messages, invoke grep(1):

          grep '^IX: ' sample.tmp > sample.idx

  CREATING THE INDEX FILE USING UCSF ENHANCED TROFF/TRANSCRIPT

     With  UCSF  Enhanced  troff/TRANSCRIPT,  the  -I  option  of
     psroff(1L)  can  produce  both formatter output and an index
     file:

          psroff -ms -I sample.inp -Tpsc sample.txt

     If it is wished to suppress the formatter output:

          psroff -ms -I sample.inp -Tpsc -t sample.txt > /dev/null




Sun Release 4.1   Last change: 10 December 1991                 9






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



  COMPLETING THE INDEX
     Any of the above procedures leaves the input  for  makeindex
     in sample.inp.  The next step is to invoke makeindex:

          makeindex -s sample.ist sample.idx

     This leaves troff(1)-ready output in the file sample.ind.

ORDERING
     By default, makeindex  assumes  word  ordering;  if  the  -l
     option  is in effect, letter ordering is used.  In word ord-
     ering, a blank precedes any letter in the alphabet,  whereas
     in  letter  ordering,  it  does  not  count at all.  This is
     illustrated by the following example:

          word order                      letter order
          sea lion                        seal
          seal                            sea lion

     Numbers are always sorted in numeric order.  For instance,

          9 (nine),  123
          10 (ten), see Derek, Bo

     Letters are first sorted without regard to case; when  words
     are  identical, the uppercase version precedes its lowercase
     counterpart.

     A special symbol is defined here to  be  any  character  not
     appearing  in the union of digits and the English alphabetic
     characters.  Patterns starting with special symbols  precede
     numbers, which precede patterns starting with letters.  As a
     special case, a string starting with a digit but mixed  with
     non-digits  is  considered  to  be a pattern starting with a
     special character.

SPECIAL EFFECTS
     Entries such as

          \indexentry{alpha}{1}
          \indexentry{alpha!beta}{3}
          \indexentry{alpha!beta!gamma}{10}

     in the input file will be converted to

          \item alpha, 1
             \subitem beta, 3
                \subsubitem gamma, 10

     in the output index file.   Notice  that  the  level  symbol
     (`!') is used above to delimit hierarchical levels.




Sun Release 4.1   Last change: 10 December 1991                10






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



     It is possible to make an item appear in a  designated  form
     by using the actual (`@') operator.  For instance,

          \indexentry{alpha@{\it alpha\/}}{1}

     will become

          \item {\it alpha\/},  1

     after processing.  The pattern preceding `@' is used as sort
     key,  whereas  the one following it is written to the output
     file.  Note that two appearances of the same key,  one  with
     and  one  without  the actual operator, are regarded as dis-
     tinct entries.

     The item, subitem, and subsubitem fields may have individual
     sort keys:

          \indexentry{aa@{\it aa\/}!bb@{\it bb\/}!cc@{\it cc\/}}{1}

     This will be converted to

          \item {\it aa}, 1
             \subitem {\it bb}, 3
                \subsubitem {\it cc}, 10

     It is possible to encapsulate a page number  with  a  desig-
     nated command using the encap (`|') operator:

          \indexentry{alpha|bold}{1}

     will be converted to

          \item alpha, \bold{1}

     where, with a suitable definition  for  TeX,  \bold{n}  will
     expand to {\bf n}.  In this example, the three output attri-
     butes  associated  with  page  encapsulation   encap_prefix,
     encap_infix, and encap_suffix, correspond to backslash, left
     brace, and right brace, respectively.  This mechanism allows
     page numbers to be set in different fonts.  For example, the
     page where the definition of a keyword appears can be in one
     font,  the  location  of a primary example can be in another
     font, and other appearances in yet a third font.

     The encap operator can also be used to create  cross  refer-
     ences in the index:

          \indexentry{alpha|see{beta}}{1}

     will become




Sun Release 4.1   Last change: 10 December 1991                11






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



          \item alpha, \see{beta}{1}

     in the output file, where

          \see{beta}{1}

     will expand to

          {\it see\/} beta

     Note that in a cross reference like  this  the  page  number
     disappears.

     A pair of encap  concatenated  with  range_open  (`|(')  and
     range_close (`|)') creates an explicit page range:

          \indexentry{alpha|(}{1}
          \indexentry{alpha|)}{5}

     will become

          \item alpha, 1-5

     Intermediate pages indexed by the same key  will  be  merged
     into  the  range implicitly.  This is especially useful when
     an entire section  about  a  particular  subject  is  to  be
     indexed,  in  which  case only the range opening and closing
     operators need to be inserted at the beginning  and  end  of
     the section.  Explicit page range formation can also include
     an extra command to set the page range in a designated font:

          \indexentry{alpha|(bold}{1}
          \indexentry{alpha|)}{5}

     will become

          \item alpha, \bold{1--5}

     Several potential problems  are  worth  mentioning.   First,
     entries like

          \indexentry{alpha|(}{1}
          \indexentry{alpha|bold}{3}
          \indexentry{alpha|)}{5}

     will be interpreted as

          \item alpha, \bold{3}, 1--5

     but  with  a  warning  message  in  the   transcript   about
     encountering an inconsistent page encapsulator.  An explicit
     range beginning in a Roman page number and ending in  Arabic



Sun Release 4.1   Last change: 10 December 1991                12






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



     is  also  considered an error.  In this instance, (if possi-
     ble) the range is broken into two subranges,  one  in  Roman
     and the other in Arabic.  For instance,

          \indexentry{alpha|(}{i}
          \indexentry{alpha}{iv}
          \indexentry{alpha}{3}
          \indexentry{alpha|)}{7}

     will be turned into

          \item alpha, i--iv, 3--7

     with a warning message in the  transcript  file  complaining
     about an illegal range formation.

     Finally, every special symbol mentioned in this section  may
     be escaped by the quote operator (`"').  Thus

          \indexentry{alpha"@beta}{1}

     will actually become

          \item alpha@beta,  1

     as a result of executing makeindex.  The  quoting  power  of
     quote  is eliminated if it is immediately preceded by escape
     (`\').  For example,

          \indexentry{f\"ur}{1}

     becomes

          \item f\"ur, 1

     which represents an umlaut-accented `u' to the TeX family of
     processors.

     From version 2.11 of makeindex, the quote operator may quote
     any  character  in  the  range  1  ... 255.   Character 0 is
     excluded because it is  used  internally  in  the  makeindex
     source  code as a string terminator.  With this change, sort
     keys can be created for all eight-bit characters  except  0.
     The sorting order is

          punctuation characters (in ASCII order),
          digits,
          control characters (1 ... 31),
          space (32),
          letters (ignoring case),
          characters 127 ... 255.




Sun Release 4.1   Last change: 10 December 1991                13






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



     Here is an example showing the  indexing  of  all  printable
     ASCII characters other than letters and digits, assuming the
     default TeX format.  For convenience, the page number refer-
     ences are the corresponding ASCII ordinal values.

          \indexentry{" @"  (space)}{32}
          \indexentry{"!@"! (exclamation point)}{33}
          \indexentry{""@"" (quotation mark)}{34}
          \indexentry{"#@"\# (sharp sign)}{35}
          \indexentry{"$@"\$ (dollar sign)}{36}
          \indexentry{"%@"\% (percent sign)}{37}
          \indexentry{"&@"\& (ampersand)}{38}
          \indexentry{"<@"$<$ (left angle bracket)}{60}
          \indexentry{"=@"= (equals)}{61}
          \indexentry{">@"$>$ (right angle bracket)}{62}
          \indexentry{"?@"? (query)}{63}
          \indexentry{"@@"@ (at sign)}{64}
          \indexentry{"[@"[ (left square bracket)}{91}
          \indexentry{"\@"\verb=\= (backslash)}{92}
          \indexentry{"]@"] (right square bracket)}{93}
          \indexentry{"^@"\verb=^= (caret)}{94}
          \indexentry{"_@"\verb=_= (underscore)}{95}
          \indexentry{"`@"\verb=~= (grave accent)}{96}
          \indexentry{"{@"\"{ (left brace)}{123}
          \indexentry{"|@"\verb="|= (vertical bar)}{124}
          \indexentry{"}@"\"} (right brace)}{125}
          \indexentry{"~@"\verb=~= (tilde)}{126}

     Characters in the actual fields following the `@'  character
     which  have  special significance to TeX must be represented
     as control sequences, or as math mode characters.  Note par-
     ticularly  how  the  entries for the at sign, left and right
     braces, and the vertical bar, are  coded.   The  index  file
     output by makeindex for this example looks like this:

          \begin{theindex}

            \item ! (exclamation point), 33
            \item " (quotation mark), 34
            \item \# (sharp sign), 35
            \item \$ (dollar sign), 36
            \item \% (percent sign), 37
            \item \& (ampersand), 38
            \item $<$ (left angle bracket), 60
            \item = (equals), 61
            \item $>$ (right angle bracket), 62
            \item ? (query), 63
            \item @ (at sign), 64
            \item [ (left square bracket), 91
            \item \verb=\= (backslash), 92
            \item ] (right square bracket), 93
            \item \verb=^= (caret), 94



Sun Release 4.1   Last change: 10 December 1991                14






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



            \item \verb=_= (underscore), 95
            \item \verb=~= (grave accent), 96
            \item \{ (left brace), 123
            \item \verb=|= (vertical bar), 124
            \item \} (right brace), 125
            \item \verb=~= (tilde), 126

            \indexspace

            \item   (space), 32

          \end{theindex}

FILES
     /usr/local/bin/makeindex
                           executable file

     /usr/local/lib/tex/macros/idxmac-amstex.tex
                           TeX macro file used by makeindex

     /usr/local/lib/tex/macros/idxmac.tex
                           TeX macro file used by makeindex

     /usr/local/lib/tex/macros/makeidx.doc
                           TeX macro file used by makeindex

     /usr/local/lib/tex/macros/makeidx.sty
                           TeX macro file used by makeindex

SEE ALSO
     ditroff(1L), latex(1L), make.index (1L), qsort(3),  tex(1L),
     troff(1L)

     UCSF Enhanced troff/TRANSCRIPT - An Overview, R. P. C. Rodg-
     ers  and  Conrad  Huang,  LSMB  Technical  Report 90-2, UCSF
     School of Pharmacy, San Francisco, 1990.

     Index Preparation and Processing, Pehong Chen and Michael A.
     Harrison,  Software: Practice and Experience, 19(9), 897915,
     September 1988.

     Automating Index Preparation, Pehong  Chen  and  Michael  A.
     Harrison.   Technical  Report 87/347, Computer Science Divi-
     sion, University of  California,  Berkeley,  1987  (a  LaTeX
     document supplied with makeindex).

     MakeIndex: An Index Processor  for  LaTeX,  Leslie  Lamport,
     February 1987 (a LaTeX document supplied with makeindex).

     Tools for Printing Indices, Jon L. Bentley and Brian W. Ker-
     nighan,  Electronic Publishing - Origination, Dissemination,
     and  Design,  1(1),  318,  June  1988  (also  available  as:



Sun Release 4.1   Last change: 10 December 1991                15






MAKEINDEX(1L)     MISC. REFERENCE MANUAL PAGES      MAKEINDEX(1L)



     Computing  Science  Technical  Report  No.  128,  AT&T  Bell
     Laboratories, Murray Hill, NJ 07974, 1986).

AUTHOR
     Pehong Chen, Chen &  Harrison  International  Systems,  Inc.
     Palo Alto, California, USA <chen@renoir.berkeley.edu>.
     Manual page extensively revised and corrected, and  troff(1)
     examples created by Rick P. C. Rodgers, UCSF School of Phar-
     macy <rodgers@cca.ucsf.edu>.

ACKNOWLEDGMENTS
     Leslie Lamport  contributed  significantly  to  the  design.
     Michael Harrison provided valuable comments and suggestions.
     Nelson Beebe improved on the portable version, and maintains
     the  source  distribution  for the TeX Users Group.  Andreas
     Brosig contributed to the German word ordering.  The modifi-
     cation  to the -ms macros was derived from a method proposed
     by Ravi Sethi of AT&T Bell Laboratories.  The LOG  and  CON-
     TRIB files in the makeindex source distribution record other
     contributions.



































Sun Release 4.1   Last change: 10 December 1991                16



